0.1F 5.5V DIP Super-Capacitor also called an ultracapacitor, is a high-capacity capacitor with a capacitance value much higher than other capacitors, but with lower voltage limits, that bridges the gap between electrolytic capacitors and rechargeable batteries. It typically stores 10 to 100 times more energy per unit volume or mass than electrolytic capacitors, can accept and deliver charge much faster than batteries, and tolerates many more charge and discharge cycles than rechargeable batteries.

Note: This product is available in two different colours Golden and Blue we will ship it according to the availability.

Features:

1. Bridges the gap between electrolytic capacitors and rechargeable batteries.
2. Stores 10 to 100 times more energy per unit volume or mass than electrolytic capacitors.
3. Very high-capacitance.
4. Low Voltage limits.

Package Includes:

1 x  0.1F 5.5V DIP Super-Capacitor.

Polyester film capacitors are film capacitors using a dielectric made of the thermoplastic polar polymer material polyethylene terephthalate (PET). It is manufactured both as metalized wounds and stacked versions. They are the low-cost mass-produced capacitors in modern electronics, featuring relatively small dimensions with relatively high capacitance values. PET capacitors are mainly used as general-purpose capacitors for DC applications, or for semi-critical circuits with operating temperatures up to 125 ?C. It features instability, low inductance, and low cost.

Package Includes:

1 x 47nF (0.047uF – 2A473J) – 100V Polyester Film Capacitor-(pack of 10)

With a wide range of items offered by the brand, Orange has attracted a lot of attention since our company’s debut. Orange Kit is an insertion of a new product line from our vast expertise knowledge base from past years. Here in this kit series, we are presenting a wide range of the most popular combo products.  At the Orange brand, we’ve gained the confidence of our consumers and got excellent comments for our Battery, Proximity sensor, Motor, BMS, and other products. When it comes to our own brands, Robu Labs tests them all before they are launched.

Get the  960PCS 2PF-100NF Ceramic Capacitor with 24 different ratings in the single kit by Orange. The Orange is Robu’s in-house brand under which we make sure that you get the quality product which you are paying for.!

This Ceramic Capacitor Kit is mostly used as safety capacitors in electromagnetic interference suppression applications. Ceramic Capacitor provides power conditioning, signal coupling or decoupling, electronic noise filtering, and remote sensing.

Additionally, you will get the  Durable Plastic Storage Box which helps you to always keep the capacitor organized and to transport the fuse kit anywhere, and keep your Products secured and free from damaging and Mixing with other components.

Application:

1. Automotive electronics
2. Industrial equipment
3. Home appliances

Package Includes:

1 x 2 PF ceramic capacitor-40 PCS

1 x 5 PF ceramic capacitor-40 PCS

1 x 10 PF ceramic capacitor-40 PCS

1 x 22 PF ceramic capacitor-40 PCS

1 x 30 PF ceramic capacitor-40 PCS

1 x 33 PF ceramic capacitor-40 PCS

1 x 47 PF ceramic capacitor-40 PCS

1 x 68 PF ceramic capacitor-40 PCS

1 x 100 PF ceramic capacitor-40 PCS

1 x 220 PF ceramic capacitor-40 PCS

1 x 330 PF ceramic capacitor-40 PCS

1 x 470 PF ceramic capacitor-40 PCS

1 x 680 PF ceramic capacitor-40 PCS

1 x 1 NF ceramic capacitor-40 PCS

1 x 1.5 NF ceramic capacitor-40 PCS

1 x 2.2 NF ceramic capacitor-40 PCS

1 x 3.2 NF ceramic capacitor-40 PCS

1 x 4.7 NF ceramic capacitor-40 PCS

1 x 6.8 NF ceramic capacitor-40 PCS

1 x 10 NF ceramic capacitor-40 PCS

1 x 22 NF ceramic capacitor-40 PCS

1 x 47 NF ceramic capacitor-40 PCS

1 x 68 NF ceramic capacitor-40 PCS

1 x 100 NF ceramic capacitor-40 PCS

An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their
anodization principle. They can only be operated with DC voltage applied with the correct polarity.

Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are

• Input and output decoupling capacitors for smoothing and filtering.
• DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
  changers
• Correction capacitors for power factor correction

Note: The image may vary from the actual product.

Package Includes:

1 x 47uF 250V Electrolytic Capacitor-(pack of 2)

Polyester film capacitors are film capacitors using a dielectric made of the thermoplastic polar polymer material polyethylene terephthalate (PET). It is manufactured both as metalized wounds and stacked versions. They are the low-cost mass-produced capacitors in modern electronics, featuring relatively small dimensions with relatively high capacitance values. PET capacitors are mainly used as general-purpose capacitors for DC applications, or for semi-critical circuits with operating temperatures up to 125 ?C. It features instability, low inductance, and low cost.

Package Includes:

1 x 5.6nF (0.0056uF – 2A562J) – 100V Polyester Film Capacitor-(pack of 10)

An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an
the electrolyte as its second electrode.

Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their
anodization principle. They can only be operated with DC voltage applied with the correct polarity.

Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are

• Input and output decoupling capacitors for smoothing and filtering.
• DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
  changers
• Correction capacitors for power factor correction

Note: Images are shown for reference.

Package Includes:

1 x 100uF 450V Electrolytic Capacitor