This is a Brand New2.8inch Touch Display Module for Raspberry Pi Pico. With Resistive Touch Controller XPT2046, ST7789 Driver. And 262K Colors, 320×240 Pixels, and SPI Interface.

Useful link:

To use this display, please follow this tutorial for hardware setup.
After hardware setup, please follow this tutorial for software setup.

Features:

1. 320×240 resolution, IPS screen, 262K colors, clear and colorful displaying effect
2. Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions
3. MicroSD card slot for storing images and direct displaying them easily
4. Programmable backlight control, power saving
5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Package Includes:

1 x 2.8inch Touch Display Module for Raspberry Pi Pico

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.

Features:

1. Powerful 5.0” Intelligent LCD–TFT display module powered by DIABLO16.
   
2. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4–wire Resistive Touch Panel (DT) or Capacitive Touch Panel (DCT).
   
3. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
   
4. 32Kb of SRAM purely for the User.
   
5. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
6. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
7. DOS compatible file access (FAT16 format) as well as low level access to card memory.
8. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
9. Display full colour images, animations, icons and video clips.
10. Supports all available Windows fonts.
11. 4.0V to 5.5V range operation (single supply)

Packages Includes:

1 x 4D System 5.0″ gen4 LCD pack for Arduino with case

The gen4–4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero, Pi Zero W and Pi Zero 2 W, which display the primary output of the Raspberry Pi, like what is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel or Capacitive Touch panel, enabling the gen4–4DPi to function with the Raspberry Pi without the need for a mouse. Communication between the gen4–4DPi and the Raspberry Pi is interfaced with a high speed 48 MHz SPI connection, which utilises an on–board processor for direct command interpretation and SPI communication compression, and features a customized  DMA enabled kernel. This combination allows this display to output high frame rate compared to other SPI display solutions, when displaying a typical image/video, and can achieve higher depending on if the image can be compressed. The gen4–4DPi is designed to work with the Raspberry Pi Operating System (previously named Raspbian OS) running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It is also compatible with Pixel and Scratch. Please note that the display resolution of the 4.3” is 480×272 pixels, while the 5.0 and the 7.0” are 800×480 pixels, and thus may not display all menus in the desktop fully, without some down-scaling. The gen4–4DPi range connect to the Raspberry Pi’s 40 pin header using the gen4–4DPi Adaptor, which then connects to the gen4–4DPi display module using a 30– way FFC Cable.
Note*: Raspberry Pi is a trademark of the Raspberry Pi Foundation, and all references to the words ‘Raspberry Pi‘ or the use of its logo/marks are strictly in reference to the Raspberry Pi product, and how this product is compatible with but is not associated with the Raspberry Pi Foundation in any way.

Features:

1. Universal Primary Display for the Raspberry Pi.
   
2. Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero, Pi Zero W and Pi Zero 2 W.
   
3. 480×272 Resolution (4.3”)
   
4. 800×480 Resolution (5.0” & 7.0”)
   
5. TFT Screen with integrated 4–wire Resistive Touch Panel (T), or Capacitive Touch Panel (CT) with Cover Lens Bezel (CLB)
   
6. Display GUI output / primary output, just like a monitor connected to the Raspberry Pi
   
7. High Speed 48MHz SPI connection to the Raspberry Pi, featuring SPI compression technology
   
8. Typical frame rate of 20 Frames per second (FPS) – 4.3”, or 7 Frames per second (5” & 7”), higher if image can be compressed further by the kernel. Lower if no compression is possible
   
9. Powered directly off the Raspberry Pi, no external power supply is required
   
10. On board EEPROM for board identification, following the HAT standard
    
11. 4x 4.0mm Mounting holes on Non–Touch and Resistive Touch modules, or via adhesive for Capacitive Touch model
    
12. RoHS and CE Compliant – note CE EMC has not been conducted on these modules

Packages Includes:

1 x 4D System 5.0″ gen4 Primary Display with Resistive Touch compatible with Raspberry Pi

Grove – 16 x 2 LCD is a perfect I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. 16×2 means two lines and each line has 16 columns, 32 characters in total. With the help of Grove I2C connector, only 2 signal pins and 2 power pins are needed. You don’t even need to care about how to connect these pins. Just plug it into the I2C interface on Seeeduino or Arduino/Raspberry Pi+baseshield via the Grove cable. There won’t be complicated wiring, soldering, worrying about burning the LCD caused by the wrong current limiting resistor.

Features:

1. Display construction: 16 Characters * 2 Lines
2. Display mode: STN
3. On board MCU
4. I2C-bus interface
5. Support English and Japanese fonts

Specifications:

1. Model: 16 x 2 LCD
2. Voltage: 3.3V/5V
3. Interface: I2C
4. Backlight color: Red
5. Font color: Black
6. Dimensions: 8 x 4 x 1mm
7. Weight: 33g

Packages Includes:

1 x Seeed Studio Grove – 16 x 2 LCD (Black on Red)

13.3inch IPS screen, 1920 x 1080 high resolution.Toughened glass cover. Supports Raspberry Pi and can also be used as a computer monitor.This LCD get power from two interfaces. One is the POWER port, you should connect an 12V/1A power adapter to this interface, the operating current of this interface is about 12V/0.6A. And the other one is the TOUCH interface.

You need to connect this interface to the USB interface of master, its operating current is about 5V/80mAThis product supports Windows 11/10/8.1/8/7 OS Connect 12/1A power adapter to the DC interface of LCD, after connecting the backlight will light.Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems on Raspberry Pi.

Features:

1. 13.3inch IPS screen,1920 x 1080 high resolution.
2. Toughened glass capacitive touch panel, 6H hardness.
3. When works with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
4. When working as a computer monitor, supports Windows 11/10/8.1/8/7, ten-points touch.
5. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
6. 3.5mm audio jack, supports HDMI audio output.
7. Embedded ferrite Hi-Fi speaker(no need for external speakers).
8. Also supports VGA input (specific cable is required and should be purchased separately).
9. 100 x 100mm spacing mounting holes (M4 screw hole) for mounting on the wall.
10. Comes with 60° tilt angle stand.

package include:

1 X Waveshare 13.3inch Capacitive Touch Screen LCD with Case

The 4DPi-35-II is a 3.5″ 480×320 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-35-II to function with the Raspberry Pi without the need for a mouse.

Communication between the 4DPi-35-II and the Raspberry Pi is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel.

The 4DPi-35-II is designed to work with the Raspbian Operating System running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It also supports the new PIXEL addition to Raspbian.

Powered directly off the Raspberry Pi, this 3.5″ Touch panel allows effortless connection, and a single download package will get you up and running with a few simple steps. Please refer to the Datasheet for detailed information.

Features:

1. Universal 3.5″Primary Display for the Raspberry Pi.
2. Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Zero, Zero W versions.
3. 480×320 QVGA Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.
4. Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
5. High Speed 48Mhz SPI connection to the Raspberry Pi, featuring SPI compression technology.
6. Powered directly off the Raspberry Pi, no external power supply is required.
7. Typical frame rate of 17FPS. Higher if image is able to be compressed by Kernel.
8. On/Off or PWM controlled backlight, selectable by on board jumper.
9. On-board EEPROM for Indentification (Revision 2.x HW only)
10. Module dimensions: 57 x 86 x 21mm (including corner plates). Weighing ~ 53g.
11. Display Viewing Area: 49 x 73.4mm
12. 4x corner plates with 2.6mm holes for mechanical mounting.
13. RoHS and CE Compliant.

Packages Includes:

1 x 4D System 3.5″ resolution Primary Display compatible with Raspberry PI