8 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive

SKU: 1150722
Out of stock

1,076.00

Add to Wishlist
Add to Wishlist
  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This is an 8 Channel 24V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from Higher voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. IN1: CH1 Signal triggering the end of 1-channel relay module (active at the High level)
  4. IN2: CH2 Signal triggering the end of 2-channel relay module (active at the High level)
  5. IN3: CH3 Signal triggering the end of 3-channel relay module (active at the High level)
  6. IN4: CH4 Signal triggering the end of 4-channel relay module (active at the High level)
  7. IN5: CH5 Signal triggering the end of 5-channel relay module (active at the High level)
  8. IN6: CH6 Signal triggering the end of 6-channel relay module (active at the High level)
  9. IN7: CH7 Signal triggering the end of 7-channel relay module (active at the High level)
  10. IN8: CH8 Signal triggering the end of 8-channel relay module (active at the High level)

Features:

  1. 8-channel 2 AMP Solid State Relay board.
  2. Control 8 loads of up to 2 amps each at 240 VAC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):105
  7. Width (mm):57
  8. Height (mm):24
  9. Weight (gm):88

Package Includes:

1 x 8 Channel 24V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive Fuse

Quick Comparison

Settings8 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive remove2 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive remove2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse remove433 24V 1 Channel Relay Module Wireless Remote Control Switch without Battery remove2 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse removeESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch remove
Name8 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive remove2 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive remove2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse remove433 24V 1 Channel Relay Module Wireless Remote Control Switch without Battery remove2 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse removeESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch remove
Image
SKU115072211506721150673115068311506761192843
Rating
Price1,076.00289.00289.00555.00416.00674.00
Stock
Out of stock
In Stock
In Stock
In Stock
Out of stock
Out of stock
AvailabilityOut of stockIn StockIn StockIn StockOut of stockOut of stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Read more

Read more

Description
  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  1. Part Number: G3MB-202P
  2. Power supply:12VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  1. Product: Wireless Remote Control Switch
  2. Operating voltage: DC 5V
  3. Operating temperature: -40~80 degrees
  4. Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
  5. Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
  6. Switch size: approx. 40 x 40 x 25mm/1.57 x 1.57 x 0.98in
  1. Part Number: H3MB-052DP
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):50@2A
  4. Isolation: Phototriac
  1. Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
  2. Working Voltage: DC 5V
  3. Load Voltage: DC 30V 10A /AC 250V 10A
  4. Work Temperature: -40℃~85℃
  5. Work Humidity: 0%~95%RH
Content

This is an 8 Channel 24V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from Higher voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. IN1: CH1 Signal triggering the end of 1-channel relay module (active at the High level)
  4. IN2: CH2 Signal triggering the end of 2-channel relay module (active at the High level)
  5. IN3: CH3 Signal triggering the end of 3-channel relay module (active at the High level)
  6. IN4: CH4 Signal triggering the end of 4-channel relay module (active at the High level)
  7. IN5: CH5 Signal triggering the end of 5-channel relay module (active at the High level)
  8. IN6: CH6 Signal triggering the end of 6-channel relay module (active at the High level)
  9. IN7: CH7 Signal triggering the end of 7-channel relay module (active at the High level)
  10. IN8: CH8 Signal triggering the end of 8-channel relay module (active at the High level)

Features:

  1. 8-channel 2 AMP Solid State Relay board.
  2. Control 8 loads of up to 2 amps each at 240 VAC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):105
  7. Width (mm):57
  8. Height (mm):24
  9. Weight (gm):88

Package Includes:

1 x 8 Channel 24V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive Fuse

This is a 2 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

Solid State Relay is similar to 2 Channel 12V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.


Features:

Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. CH1relay module signal trigger point (Effective high-level trigger)
  4. CH2relay module signal trigger point (Effective high-level trigger)

Features:

  1. 2-channel 2 AMP Solid State Relay board.
  2. Control 2 loads of up to 2 amps each at 240 V AC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: G3MB-202P
  2. Power supply:12VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):50
  7. Width (mm):30
  8. Height (mm):24
  9. Weight (gm):18

Package Includes:

1 x 2 Channel 12V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive Fuse

[vc_row][vc_column][vc_column_text]This is a 2 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from Higher voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. IN1: CH1 Signal triggering the end of 1-channel relay module (active at the Low level)
  4. IN2: CH2 Signal triggering the end of 2-channel relay module (active at the Low level)

Features:

  1. 2-channel 2 AMP Solid State Relay board.
  2. Control 2 loads of up to 2 amps each at 240 VAC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):51
  7. Width (mm):32
  8. Height (mm):22

Package Includes:

1 x 2 Channel 12V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive Fuse[/vc_column_text][/vc_column][/vc_row]

433MHz 24V 1 Channel Relay Module Wireless Remote Control Switch is controlled by an intelligent microprocessor, which can be used in the control of garage door, lighting control, curtain control, door control system, etc. Easy to install, small size, safe and reliable.

Note: Remote Control included in the package does not come with a Battery due to Air Express Shipping Limitations. You have to buy the battery separately. Click Here


Features: 

  1. Operation Manual: Press the learn button for 2 or 3 seconds, lights out (that has entered the state of learning), Release the learning button, press any key of the remote control, and the indicator light flashes 5 times to show the success of the study. Note: The controller can learn the fixed code/learning code, a total of 16 different encodings, arbitrary button remote control, and beyond will be cleared in the early learning of remote control.
  2. Removal method: Continue to hold down the learning button for about 8 seconds. The indicator light is extended from extinction to success.
  3. Work mode switching: Connect a 12V DC output: the learning of the single remote control switch 12V input, connect a 12V DC power supply, the output from 12V positive public end, often beginning the positive on the output side of the light bulb, the bulb of the cathode received power of the cathode, a simple control light bulb circuit is designed.

Package Includes:

1 x 433MHz 24V 1 Channel Relay Module

This is a 2 Channel 3-24V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage DC loads from lower voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. DC+connect power positive
  4. DC-connect power negative
  5. CH1relay module signal trigger point (Effective low-level trigger)
  6. CH2relay module signal trigger point (Effective low-level trigger)

Features:

  1. 2-channel 2 AMP Solid State Relay board.
  2. Control 4 loads of up to 2 amps each at 50 V DC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: H3MB-052DP
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):50@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):35
  7. Width (mm):25
  8. Height (mm):24
  9. Weight (gm):18

Package Includes:

1 x 2 Channel 3-24V Relay Module Solid State High-Level SSR DC Control DC with Resistive Fuse

ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch is 4 channel WIFI relay module carrying an ESP8266 WIFI module and mature 8 bit MCU, with a Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN). It is easy to set up.


Features:

  1. Integrated design.
  2. APP remote control.
  3. DC 5V work power supply.
  4. Onboard high-quality MCU and ESP8266 WIFI module.
  5. Support Two Work Mode:
  6. Mode 1:cellphone carry on WIFI module directly.
  7. Mode 2: Cellphone and WIFI modules carry on router together.
  8. Additional features: USB Relay Module(Without ESP8266).
  9. Transmission distance:
  10. In the open environment, when the mobile phone is carrying on the WIFI module, the maximum transmission distance is 100 meters.
  11. When the WIFI module and cell phone carrier on the router at the same time the signal transmission distance depends on the router signal.
  12. 7. Use the Smartconfig technology to complete the configuration of the account and password of the ESP8266 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  13. Optocoupler isolated output, safe and reliable.
  14. The board contains 220V,10A/250V AC 10A/30V DC Songle original relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time.
  15. PCB material and manufacturing process meets the standards of RoHS.
  16. Onboard relay LED indicator, mode option and working statue LED indicator.
  17. Reserved UART debug interface and MCU download port for the program.

Package Includes:

1 x ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Product Type

Wireless Remote Control

Operating Voltage(V)

DC 5V

Operating Temperature (°C)

-40~80 degrees

Operating Frequency

433MHZ Receive sensitivity: ≥-95dB

Working Mode

jump switch, point action, self locking, and interlocking(adjustable)

Remote Control Distance

20-40m/65.61-131.23ft

Material

ABS Plastic

Weight (g)

approx. 24g

Switch size

Approx. 40 x 40 x 25mm/1.57 x 1.57 x 0.98in

Remote Control size

approx. 50 x 40 x 12mm/1.96 x 1.57 x 0.47in

Product Name

ESP8266 ESP-01 5V 4-Channels WiFi Relay Module

Input Voltage (V)

5

Operating Temperature Range (°C)

40℃~85℃

Operating humidity

0%~95%

Channel

4

Length (mm)

60

Width (mm)

63

Height (mm)

20

Weight (gm)

19