This is the Adafruit Feather M0 Adalogger – our take on an ‘all-in-one’ Cortex M0 datalogger (or data-reader) with built-in USB and battery charging. It’s an Adafruit Feather M0 with a microSD holder ready to rock!

At the Feather M0’s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with a built-in USB so it has a USB-to-Serial program & debug capability built-in with no need for an FTDI-like chip.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built-in battery charging. You don’t need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when it’s available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Note: The package does not include SD Card. You have to purchase it separately.

Features:

1. ATSAMD21G18 @ 48MHz with 3.3V logic/power
2. 256KB of FLASH + 32KB of RAM
3. No EEPROM
4. 3.3V regulator with 500mA peak current output
5. USB native support comes with a USB bootloader and serial port debugging
6. You also get tons of pins – 20 GPIO pins
7. Hardware Serial, hardware I2C, hardware SPI support
8. 8 x PWM pins
9. 10 x analog inputs
10. 1 x 10-bit analog output (DAC)
11. Built-in 100mA lipoly charger with charging status indicator LED
12. Pin #13 red LED for general purpose blinking
13. Power/enable pin

Package Includes:

1 x Adafruit Feather M0 Adalogger

The STM32 Nucleo-64 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode. The ARDUINO Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.

Note:

1. For more details refer  to datasheet in attachment  section
2. Actual product may vary in terms of color, Design.

Features:

1. Compact design
2. Easy to use
3. Low power consumption
4. Best for DIY projects
5. Plug and play device

Packages Includes: 

1 x STMICROELECTRONICS Development Board, Nucleo-64, STM32F446RE MCU, On-Board Debugger, Arduino, ST Zio&Morpho Compatible

Industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible evaluation and development environment for 2A (typ) digital output modules, featuring the safe driving and smart diagnostic capabilities of the IPS160HF single high-side switch. The X-NUCLEO-OUT08A1 interfaces with the microcontroller on the STM32 Nucleo via 3KV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board and can also be stacked with another XNUCLEO-OUT08A1 or X-NUCLEO-OUT10A1. Two X-NUCLEO-OUT08A1 expansion boards allows you to evaluate a dual channel digital output module with 2A (typ.) capability each, or a 2A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one.

Note: For more technical details go through Datasheet in the attachment section

Features & Specifications:

1. Based on IPS160HF single high-side switch, which features:
   – Operation up to 60 V/2.4 A
   – Low power dissipation (RON(MAX) = 120 mΩ)
   – Fast decay for inductive loads
   – Open load detection and diagnostics
   – Overload and overheating protections with thermal shut-down and cut-off
   – PowerSSO-12L package
2. Application board operating range: 12 to 33 V/0 to 2.4 A
3.  Extended voltage operating range (J1 open) up to 60 V
4.  Status and diagnostic LEDs
5.  3 kV galvanic isolation
6.  Supply rail reverse polarity protection
7.  Ready for Safety Digital Output Architecture
8.  EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
9.  Wide application development potential in STM32 Nucleo development
   environment
10.  Equipped with Arduino™ UNO R3 connectors

Package Includes:

1 x STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board

X-NUCLEO-6283A1 is an expansion board for the STM32 Nucleo development boards. It provides a complete evaluation kit allowing anyone to learn, evaluate and develop their applications using the VD6283, a colour sensor with advanced light flicker frequency extraction. The VD6283 (1.83 x 1.0 x 0.55 mm) is the smallest 6-channel, ambient light sensor. Light measurement is fast and accurate thanks to an individual ADC and readout circuitry for each colour channel (Red, Green, Blue, IR, Clear and Visible). The VD6283 uses hybrid colour filters with precise responses allowing accurate computation of the correlated colour temperature (CCT) and Lux information. The VD6283 can be used for display brightness management or scene light correction. Additionally, the VD6283 can extract light flickering frequencies from 100 Hz to 2 kHz, including LED square signals. The X-NUCLEO-6283A1 expansion board is compatible with the STM32 Nucleo-64 board family, and with the Arduino UNO R3 connector layout.

Features:

1. VD6283 6-channel ambient light sensor (ALS) with advanced light flicker extraction
2. Compatible with STM32 Nucleo board family
3. Equipped with Arduino® UNO R3 connector
4. Full system software (SW) supplied, including code examples and graphical user interface

Package Includes:

1 x STMICROELECTRONICS Expansion Board, VD6283, STM32 Nucleo Boards

CM4 Industrial is an industrial-embedded computer based on Raspberry Pi Compute Module 4. The system can be configured by 1GB/2GB/4GB/8GB RAM and 8GB/16GB/32GB EMMC according to different applications, supporting SD card startup. It provides a variety of industrial communication interfaces and functions, such as RS232, RS485,
high-precision ADC, isolated IO input, relay control, the real-time clock of battery backup, and alarm buzzer.

Besides, 1x Ethernet interface with POE function, 1x 10/100M port, 4G/LTE module, external antenna support, certified 2.4/5.8G dual-band WIFI, and Bluetooth is also provided. Moreover, CM4 Industrial support certified 2.4/5.8G dual-band WIFI, and Bluetooth is also provided. Moreover, CM4 Industrial supports an official 1x 8-megapixel camera, 1x DSI display port, and 1x HDMI cable port.

Other features of CM4 Industrial are also worth mentioning, for example, onboard 32Mb serial Flash is used to store system data, the power supply is available in a wide range of 12~18V, and ESD protection is
provided for all important interfaces. The users can add more functions on the board through PCI-e 1x Gen2 interface, the standard 40 pins interface, the standard 40 pins connector, the 2x 4-pin USB interface for internal expansion, 1x TTL electric
level RS232 interface, etc. to fully utilize its powerful communication capability to satisfy all kinds of requirement in CM4 Industrial.

Features:

• Processor: The ED-CM4IND10-1232-4C baseboard is powered by a quad-core ARM Cortex-A53 processor, running at up to 1.5GHz. This processor provides a balance of performance and power efficiency.
• RAM: The baseboard has 2GB of LPDDR4 RAM, which is sufficient for many embedded applications and can run a variety of software and applications.
• Storage: The ED-CM4IND10-1232-4C baseboard has 32GB of eMMC flash storage, which provides a reliable and fast way to store and access data.
• Connectivity: The baseboard features built-in WiFi and Bluetooth 4.2 connectivity, allowing it to connect to wireless networks and devices. It also has a built-in 4G LTE module, which can provide high-speed cellular connectivity.
• I/O interfaces: The ED-CM4IND10-1232-4C baseboard has a range of I/O interfaces, including USB 2.0 and USB 3.0 ports, HDMI and MIPI-DSI display interfaces, and a 3.5mm audio jack. It also has a Gigabit Ethernet port, a microSD card slot, and a range of GPIO pins.
• Operating system: The baseboard supports a variety of operating systems, including Android and Linux, allowing developers to choose the most appropriate OS for their application.
• Power supply: The ED-CM4IND10-1232-4C baseboard requires a 5V DC power supply, which can be provided via a micro-USB port or a DC jack.
• Metal case: The baseboard comes with a durable metal case, which provides protection against environmental factors such as dust, moisture, and shock.

Specifications:

1. Core Processor: ARM® Cortex™-A72 1.5GHz, 4 Core
2. Storage: eMMC, 32GB
3. Memory: DDR (2GB Installed)
4. Card Slot: Micro SD
5. Supply Voltage: 7 ~ 36VDC
6. Mounting Type: DIN Rail or Wall Mount
7. Operating Temperature: -25°C ~ 50°C
8. Operating System: Raspberry Pi Raspbian OS Installed

For Detailed technical specifications go through datasheet in the attachments

Package Includes:

1 x EDATEC ED-CM4IND10-1232-4C baseboard with WIFI Antenna