The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. HUZZAH32 comes with everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings.

This version of the ESP32 Feather comes with plain 0.1″ headers already soldered in so it’s ready for instant gratification and Feather fun!

That module nestled at the end of this Feather contains a dual-core ESP32 chip, 4 MB of SPI Flash, tuned antenna, and all the passives you need to take advantage of this powerful new processor. The ESP32 has both WiFi and Bluetooth Classic/LE support. That means it’s perfect for just about any wireless or Internet-connected project.

Features:

1. 240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPS
2. Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
3. Integrated dual-mode Bluetooth (classic and BLE)
4. 4 MByte flash include in the WROOM32 module
5. On-board PCB antenna
6. Ultra-low noise analog amplifier
7. 10x capacitive touch interface
8. 3 x UARTs (only two are configured by default in the Feather Arduino IDE support, one UART is used for bootloading/debug)
9. 3 x SPI (only one is configured by default in the Feather Arduino IDE support)
10. 2 x I2C (only one is configured by default in the Feather Arduino IDE support)
11. 12 x ADC input channels
12. 2 x I2S Audio
13. 2 x DAC
14. PWM/timer input/output available on every GPIO pin
15. OpenOCD debug interface with 32 kB TRAX buffer
16. SDIO master/slave 50 MHz
17. SD-card interface support

Package Includes:

1 x Adafruit HUZZAH32 – ESP32 Feather Board

Introducing the FeatherS2 – The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker. The FeatherS2 is a power house, fully souped up with 16 MB of Flash memory (for firmware and file storage) and8 MB of QSPI-based external PSRAM so you can have massive storage buffers.

This Feather comes with two 3.3V regulators: The first one is for the general operation of the board and the ESP32-S2, RAM and Flash. The second LDO is for you to use to connect external 3V3 modules, sensors and peripherals, and it has programmable EN control tied to GPIO21 and it’s connected to the deep sleep capabilities of the S2, so if the S2 goes into deep sleep, the 2nd LDO is automatically shut down for you! Both regulators are ultra low noise and have ultra low quiescent current, and both support a maximum of 700mA output.

Features:

1. QWIIC/STEMMA connector
2. Feather format
3. Optimized power path for low-power battery usage
4. LiPo battery management
5. Power (red), Charge (orange) & IO13 (blue) LEDs
6. APA102 RGB LED (CLK IO45, DATA IO40)
7. ALS-PT19 Ambient Light Sensor (IO14)
8. USB-C
9. USB back feed protection

Package Includes:

1 x Adafruit FeatherS2 – ESP32-S2 Feather Development Board

Sipeed M1s Dock is a development board designed based on Sipeed BL808 M1s Module, routes interface like MIPI CSI、SPI LCD and FPC connector, to get rid of worries of connecting cable. Designed with the most minimal design, for customers to evaluate the module, or hobbyists to play directly, etc.

Sipeed M1s Dock is a powerful core board with a screen and uses the BL808 RISC-V as the CPU, and the powerful tri-core heterogeneous architecture can play a role in high-performance computing power.

BL808 mainly includes two subsystems, wireless and multimedia. The wireless subsystem includes a RISC-V 32-bit high-performance CPU, integrated Wi-Fi /BT/BLE wireless subsystem, which can provide a variety of connection and transmission experiences. The multimedia subsystem includes a RISC-V 64-bit ultra-high-performance CPU and integrates video processing modules such as DVP/CSI/ H264/NPU, which can be widely used in various AI fields such as video surveillance/smart speakers. As well as the BLAI-100 (Bouffalo Lab AI engine) NPU for video/audio detection and/or recognition.

It supports 2.4G WIFI/BT/BLE. You can choose different networking methods according to your needs to achieve different functions. At the same time, the M1s Dock comes with a USB to UART debugger, so you can easily burn code to the board with just one click. And then It has more rich features that are equipped with a base of the screen and base of the MIPI camera, as well as onboard an analog microphone, an LED and a TF card slot. For example, you will have a richer experience when choosing a 1.69-inch 240×280 capacitive touch screen and 200W pixel camera.

One advantage of the BL808 is that it can support Linux, and the microcontroller does include an MMU, so you would not have to deal with the usual uClinux headaches.

Applications :

1. Artificial intelligence application
2. Face recognition
3. Posture recognition
4. Gesture recognition
5. Video surveillance

Features:

1. Stronger-performance CPU: main chip BL808 RISC-V + NPU BLAI-100, the highest operating frequency of 480MHz to achieve powerful performance of three-core heterogeneous.
2. Wireless three-mode integration: Support 2.4G WIFI / BT / BLE, any mode can efficiently be networked.
3. One-click easy Burning: Sipeed M1s Dock has an onboard USB-to-UART debugger, which can realize one-click burning without pressing physical buttons.
4. Friendly visualization features: The onboard display interface (optional 1.69-inch 240×280 capacitive touch screen) and the MIPI camera
5. interface(optional 200W pixel camera) provide a stronger visual experience.
6. High port compatibility: Route USB-OTG to USB Type-C port.

Specifications:

1. CPU: RV64GCV 480MHz, RV32GCP 320MHz, RV32EMC 160MHz
2. NPU: BLAI-100
3. Capacity: 768KB SRAM + 64MB UHS PSRAM
4. Encode and Decode: MJPEG and H264(Baseline/Main), 1920×1080@30fps + 640×480@30fps
5. Camera interface: DVP and MIPI-CSI
6. Display interface: SPI、DBI、DPI(RGB)
7. Wireless: Wi-Fi 802.11 b/g/n, Bluetooth 5.x Dual-mode(BT+BLE), Wi-Fi / BT co-existence
8. Port Basic Parameters: USB 2.0 HS OTG/TYPE-C
9. Onboard components: USB to UART debugger, 1.69-inch 240×280 capacitor touch screen, 2M solution camera, 1 analog microphone、1 LED、1 TF card slot
10. TYPE-C interface: 5V±10% 0.5A
11. Temperature rise: <30K
12. Operating temperature: -10℃ ~ 65℃.

Packages Includes:

1. 1 x M1s Dock
2. 1 x TYPE-C Cable
3. 1 x Pin Header

Trinket’s got a big sister in town – the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It’s like an Arduino Pro Mini with more pins and USB tossed in, so delicious. Trinket’s a year old now, and while its been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That’s why we designed Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM. Like the Trinket, it has onboard USB bootloading support – we opted for a MicroUSB jack this time. We also added Optiboot support, so you can either program your Pro Trinket over USB or with a FTDI cable just like the Pro Mini and friends. The Pro Trinket PCB measures only 1.5″ x 0.7″ x 0.2″ (without headers) but packs much of the same capability as an Arduino UNO. So it’s great once you’ve finished up a prototype on an official Arduino UNO and want to make the project smaller. The Pro Trinket 5V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. at the same speed and voltage.

Features:

1. ATmega328P onboad chip in QFN package
2. 16MHz clock rate, 28K FLASH available
3. USB bootloader with a nice LED indicator & headers for an FTDI port for reprogramming
4. On-board 5.0V power regulator with 150mA output capability and ultra-low dropout, up to 16V input, reverse-polarity protection, thermal and current-limit protection.

Package Includes: 

1 x Adafruit Pro Trinket – 5V 16 MHz

The LAUNCHXL-RM42 LaunchPad is an inexpensive evaluation platform based on Hercules RM42L432, which is a dual-core ARM Cortex-R4-based MCU with features like 12-bit ADC, HET with programmable timer pins, eQEP, MibSPI, and serial communication interfaces. The LaunchPad comes pre-programmed with the Hercules Safety MCU Demo enabling users to easily learn about the key safety, data acquisition, and control features of the Hercules MCU platform.

Features:

1. USB powered
2. On board USB XDS100v2 JTAG debug
3. Onboard SCI to PC serial communication
4. Two LEDs
5. Reset switches

                                        note: For more technical details, go through the datasheet in the attachments

Package Includes:

1 x RM42 Development Board, RM42x, Hercules Launchpad, USB powered, on board XDS100v2 J-TAG emulator

CM4 Media is a multimedia computer designed based on Raspberry Pi Compute Module 4. It provides 2 channels of USB 3.0, 1 channel of USB2.0, 1 channel of Gigabit Ethernet interface, 2 channels of HDMI interface supporting 4K video output, an 8-megapixel camera, and 2 channels of stereo speakers. You can play Audio and video without additional accessories.
You only need to press the power button to start or shut down the computer like operating a Windows computer. The operating system can be installed on the SSD hard disk and it boots faster than from an SD card. The large-capacity SSD hard disk can store various video data. The access speed of the SSD hard disk is up to 300MB/S.
CM4 Media installed Raspberry Pi-certified external WiFi and Bluetooth dual-band antennas to provide better wireless signals.
You can load different application software to turn the CM4 Media multimedia computer into a network set-top box, network storage server, wireless access point, and other different devices.
CM4 Media’s case is made of CNC-cut aluminum alloy, very beautiful. The case provides excellent heat dissipation performance for the CPU, PMU, and wireless module, which improves the system’s reliability. You can choose black, silver and pink colors.

Package Includes:

1 x EDATec CM4 Media Baseboard CM4104000 4GB DDR,120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera