Here is the New Cligo Robot kit by EasyMech which can be operated wirelessly Smartelex Remote control provided out of the box. The Cligo Smart Robot Car Kit is a great way to get started with four motor robotics and sensor integration using the Arduino programming language. The kit includes everything you need. This Arduino robot kit will teach you how to drive your Arduino robot car, how to have it follow lines, how to control it remotely, and more.

This kit doesn’t require previous programming or electronics experience but it is recommended that you possess an understanding of or desire to learn about robotics. Also, this Arduino robot acts as a gateway to design and implement various robotics projects using Arduino.

Easy to Assemble:

The Cligo 4WD Chassis is a durable and modular robot platform from EasyMech. The chassis plates and mounts are cut from ABS plastic and utilize sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach your motors, sensors, and robotics controller.

Caution – To Assemble this robot this kit comes with a screwdriver, you will need it to mount a servo motor. Do not attempt to remove chassis parts by squeezing them with pliers, it may break the small nubs.

Features:

1. EasyMech’s branded Product.
2. Easy to assemble, Snap-fit chassis
3. EasyMech Remote Control provided
4. Lightweight ABS Chassis.
5. Hands-on experience of programming, electronics, and robotics
6. Ages: 10+

Package Includes:

1 x Cligo Wireless Remote Controlled Smart Car Chassis
4 x 300 RPM BO Motor-Straight
4 x 65mm Robot Wheel Grade B for BO Motors (Yellow)
3 x Orange ICR 18650 2500mAh Lithium-Ion Battery
1 x Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover
1 x Tomo V6-2 Dual USB 2 Slots Battery Intelligent Charger For AA / AAA / 18650 Batteries Black
1 x SmartElex Wireless Remote Control with L293D Motor Driver
2 x M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
1 x 3M Multipurpose Double Sided Sponge Glue Adhesive Dash Pad
1 x Assembly Guide

To know more about our brand EasyMech, please do read our following article,

What is EasyMech?

Elegoo Smart Robot Car: An educational kit for beginners to get hands-on experience in Arduino programming, electronics assembling, and robotics knowledge. It is an integration solution for robotics learning and made for Arduino education.  Complete Package: Contains 23 kinds of module parts including obstacle avoidance, line tracking module, infrared remote control, and Bluetooth 2.0 with EDR via phone and tablets of Android system, etc.

Easy to Assemble: All the module interface has been modified with XH2.54 ports to make it much easier and convenient to assemble the car and reduce the chances for errors. Refined Tutorial: HD rendering instructions of how to assemble the robot car from scratch and all the necessary programs and codes are included. Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends.

The most economical and newest robot car kit with a simple mechanical structure, a nice system, and is very easy to install. CD with the best tutorial including the video which brings you to the robot car world. there is an ultrasonic sensor to keep the car away from the barrier.

3 x line tracking module can make the car according to the specific travel. IR receiver assists you to control the cay by remote. You can install the APP(in the CD) on your phone which can control the car with a Bluetooth module.  

Note: The Actual Image may vary in terms of the Structure of Product

Note: This car kit required 2 x 18650 Rechargeable Batteries. which is not included in the kit Box due to different shipping categories. You can buy any 18650 Battery separately. Following are the link to buy these batteries

Orange ICR 18650 2000mAh 20C Lithium-Ion Battery

Orange ICR 18650 2200mAh 22F Lithium-Ion Battery

SAMSUNG INR18650-25R 2500mAh Li-Ion Battery

SAMSUNG ICR18650-26 J 2600mAh Li-Ion Battery

PANASONIC NCR 18650B 3400 mAh Li-Ion Battery

Package Includes:

1. 1 x Elegoo UNO R3
2. 1 x Elegoo USB Cable
3. 1 x Arduino Sensor Shield V5.0
4. 1 X 18650 Travel Connector
5. 1 x DC BO motor
6. 1 x 2-18650 Battery Box with Connector
7. 2 x Acrylic Plate (Front and Back)
8. 4 x Plastic Tyre Wheel
9. 1 x Bluetooth Module
10. 1 x Ultrasonic sensor
11. 1 x IR Receiver Module
12.  1 x L298 Motor Driver Board
13. 1 x IR Remote
14. 3 x Line Tracking Module
15. 1 x SG90 Servo Motor
16. 8 x Screws (long)
17. 38 x Screws (short)
18. 4 x Aluminium block
19. 6 x Copper Cylinder Pillers
20. 6 x Copper screws
21. 1  x Screw Driver
22. 1 x CD with tutorial
23. 1 x All required Connecting Cables with Attached Connectors

This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan heads).

With modules in the kit, you can fast get started with robotic development like line tracking, obstacle avoidance, IR remote control, video monitoring via a network, etc. What’s more, thanks to the rich Raspberry Pi open-source resources, and the modular design of AlphaBot, you’ll learn how to extend and refit, and finally, build your own Raspberry Pi robot.

Note:

Raspberry Pi is NOT included.

Features: 

1. Raspberry Pi/Arduino interfaces, works with either one separately, or both
2. Arduino extend header, supports Arduino shields
3. Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminate the trouble of connecting mess wires.
4. LM298P motor driver with diode protection circuit, more safety
5. LM2596 voltage regular provides stable 5V power to the Raspberry Pi/Arduino
6. TLC1543 AD acquisition chip, allows the Pi to use analog sensors

What’s On Alphabot board:

1. Raspberry Pi interface: for connecting Raspberry Pi
2. Arduino interface: for connecting Arduino
3. Motor interface
4. Ultrasonic module interface
5. Servo module interface
6. Obstacle avoidance module interface
7. Speed measuring interface
8. Battery holder: supports 18650 batteries
9. Reserved power input (not soldered): for connecting other external power supply
10. Arduino expansion header: for connecting Arduino shields
11. UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
12. SPI interface: for connecting NRF24L01 wireless module
13. Line tracking module interface
14. TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
15. LM298P: dual H bridge motor driver chip, up to 2A current
16. Anti-reverse diode
17. Power switch
18. LM2596: 5V regulator
19. Power indicator
20. UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
21. IR receiver: control the robot remotely via infrared
22. Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals

Package Includes:

1. AlphaBot mainboard x1
2. Tracker Sensor x1
3. Photo Interrupter Sensor x2
4. Infrared Proximity Sensor x2
5. Motor with gearbox 2PCS x1
6. AlphaBot wheel 2PCS x1
7. AlphaBot acrylic chassis x1
8. Motor mounting plate 4PCS x1
9. Omni-direction wheel x1
10. 20-slots encoder disk 2PCS x1
11. IR remote controller x1
12. XH2.54 4cm 4Pin 2PCS x1
13. XH2.54 4cm 3Pin 2PCS x1
14. XH2.54 4cm 7Pin x1
15. AlphaBot screws x1
16. RPi Camera (B) x1
17. SG90 servo x2
18. 2 DOF pan and tilt kit x1
19. 15PIN FFC 25cm x1
20. Micro SD Card 16GB x1
21. Power adapter US standard 5V/3A micro x1
22. USB Micro-B to USB-C Adapter x1
23. Micro SD Card Reader x 1

This shock absorber effectively reduces the shaft effect and is equipped with a spare spring, which is equivalent to having three springs, soft, medium and hard. Suitable for AXIAL SCX10, 90046, Ghost, TRX-4, JEEP Wrangler, etc.

Note : Product is available in different color 

Features:

1. CNC machined aluminium shock body.
2. Easy load shock seal assembly.
3. Suit for 1/10 RC Car Crawler, such as SCX10 90046 TRX4 .

Specification:

1. Shock Body OD: (12mm)
2. Shaft Diameter: (3.0mm)
3. Product Weight:About 20g
4. End Hole OD: (3.0mm)
5. Spring OD: (0.8mm)
6. Overall Length (Uncompressed): 100mm
7. Color:Gray,red,green and black(optional)
8. Travel Length: 25mm
9. Ball Head Length: 7.5mm and 5.6mm
10. Hole to Hole (Uncompressed): 90mm
11. Fit For:1/10 RC Crawler AXIAL SCX10 TRX4

Package Includes:

1 x 100mm Oil Suspension Shocks Absorber TRX4- 1 pair

It is made of aluminium alloy, which can support a long service life. The shock absorber will greatly reduce the shake and improve stability. Crafted from high-quality CNC machining aluminium with anodizing that makes it solid, durable and of exquisite appearance, high polishing performance. Spring is flexible and elastic, which has high strength and durability, also can adjust the tension alloy shocks to provide better performance. Springs shocks has fine workmanship and are high quality, and it provides your model car with balanced driving, reducing the vibration caused by rough roads.

Package Include:

1 x RC Piggyback Shock Absorber Hole to hole 90mm

It is made of aluminium alloy, which can support a long service life. The shock absorber will greatly reduce the shake and improve stability. Crafted from high-quality CNC machining aluminium with anodizing that makes it solid, durable and of exquisite appearance, high polishing performance. Spring is flexible and elastic, which has high strength and durability, also can adjust the tension alloy shocks to provide better performance. Springs shocks have fine workmanship and are high quality, and it provides your model car with balanced driving, reducing the vibration caused by rough roads.

Note : Color of product may be different

Package Includes:

130mm Long Shock Absorber damper -1 Pair