Take advantage of the latest DYS 30A Brushless ESC for FPV Drone BLHeli_S development with these DShot capable ESC’s. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilize a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.

Features: 

1. Utilizes high-performance EFM8BB21 50MHz MCU
2. 12 FET Design
3. High-current burst rating
4. High-Resolution Throttle steps
5. Supports: BLheli_S & Dshot600, Dshot300 – faster than Oneshot
6. Dshot ESCs don’t require an ESC calibration
7. Firmware upgradable via signal wire (works with USB Linker for XM series)
8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS 30A Brushless ESC for FPV Drone

1 x User Manual

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.

Features:

1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

An opto ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky 30A 2-6S ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 30A 2-6 ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Specifically optimized firmware ESC, the ESC has a very good compatibility
2. Highly intelligent, adaptive ability, extremely easy to use
3. Throttle signal line is a twisted pair, copper wire to reduce cross-talk signal generated
4. Supports up to 621Hz refresh rates up to the throttle signal, compatible with a variety of flight control (Note: More than 500Hz signal of the throttle throttle are all non-standard signal)
5. Use MOSFET special driver chip, performance and stability far beyond the driving circuit with discrete components built

Specifications:

1. Model: 30A 2-6S ESC
2. Cont. Current: 30A
3. Max. Current: 40A
4. Voltage: 4 V-16.8V
5. Connector: Female-Banana connector
6. BEC : No (OPTO ESC)
7. Li-ion/Li0poly: 2-6S
8. Weight: 30g

Packages Includes:

1 x ReadytoSky 30A 2-6S ESC 3.5mm Banana connector

An opto ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky 30A 2-6S ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 30A 2-6 ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Specifically optimized firmware ESC, the ESC has a very good compatibility
2. Highly intelligent, adaptive ability, extremely easy to use
3. Throttle signal line is a twisted pair, copper wire to reduce cross-talk signal generated
4. Supports up to 621Hz refresh rates up to the throttle signal, compatible with a variety of flight control (Note: More than 500Hz signal of the throttle throttle are all non-standard signal)
5. Use MOSFET special driver chip, performance and stability far beyond the driving circuit with discrete components built

Specifications:

1. Model: 30A 2-6S ESC
2. Cont. Current: 30A
3. Max. Current: 40A
4. Voltage: 4 V-16.8V
5. BEC : No (OPTO ESC)
6. Li-ion/Li0poly: 2-6S
7. Weight: 30g

Packages Includes:

1 x ReadytoSky 30A 2-6S ESC

Open source BLHELI-S program supports flight control signals such as DSHOT300 600 ONESHOT. With a high-performance processor, the response is fast and the throttle response is fast. A large number of installed experience, stable and reliable, strong overcurrent capacity.

Features:

1. It  is a digital ESC
2. Automatically detects the throttle stroke and neutral position of the throttle
3. It is suitable for nesting boats, remote control cars

Package Includes:

1 x Cyclone 20A BLHeil_S 20A ESC

The Flame 80A HV V2 ESC by Tiger Motor provides professional-level power for large multi-rotor aircraft. The ESC is housed in a machined aluminum case providing both heat dissipation and protection.

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Output: Continuous 80A, Burst 105A up to 10 Secs.
2. Input Voltage: 6-12 cells lithium battery.
3. Refresh Rate: 600Hz
4. Protection: IP57
5. BEC: No
6. Signal Frequency: Up to 621Hz
7. Size: 77mm (L) x 35mm (W) x 18mm (H).
8. Weight: 94g.

Package Includes:

1 x T Motor FLAME 80A 12S V2.0 ESC