DYS 45A Brushless Speed Controller ARIA 4-in-1 ESC is a completely digital signal, Oneshot and multishot are analogue signals. During the use of analogue signals, ESC hardware and software will generate some noise, which is clutter. If there are too many clutter, you need to add a filter capacitor or resistor to hardware filtering. (Off-topic, those who need to remove the capacitor is probably the case) and it is a digital signal, do not need to calibrate the ESC, no filtering is required during the transmission!

It is designed for multi-axis UAV transition machines. Accurate speed control, accurate signal acquisition.

ESC comes with a current sensing module that can cooperate with flight control to detect current value. ESC adopts an adaptive control system and is compatible with most motors on the market. The PCB board adopts thickened 6-layer treatment, the internal resistance heat generation is small, the layout of the components is optimized, and the installation is more convenient.

Features:

1. Strong anti-interference ability
2. PCB adopts 6-layer, low inner resistance
3. Built-in Current detection module, which can cooperate with the flight control to detect the current value
4. The Dshot series calls the 150/300/600/1200
5. Support 2S-6S, 4PWM input without BEC
6. Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
7. You can upgrade the firmware online or change the configuration parameters via the signal line.
8. ESC comes with a current sensing module that can cooperate with flight control to detect current value.
9. ESC adopts an adaptive control system and is compatible with most motors on the market.

Package Includes:

1 x DYS 45A ARIA 4-in-1 ESC

2 x Wire 12AWG 100mm (Red + Black)

1 x 470μF 35v Capacitor

1 x XT60H Connector with Housing- Male

1 x Connecting Cable

An ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky Simonk 30A ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky Simonk 30A ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
7. Ultra-low resistance MOSFET, strong flow capacity

Specifications:

1. Cont Current: 30A
2. Burst Current: 35A
3. BEC Model: Linear mode
4. BEC Output: 5V2A
5. Li-ion/Li0poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH
6. Connector: Banana Connector (Female)
7. Connector size: 3.5mm
8. Weight: 23g
9. Dimension: 6 x 3 x 1mm

Packages Includes:

1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)

This T-motor 200A 14S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 200A, and a peak current of up to 240A (10Sec).

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Continuous Current (A): 200
2. Peak Current (10sec): 240
3. BEC: N0
4. LIPO: 6-14s
5. Programmable: No

Package Includes:

1 x T motor Flame 200A 14S

This 4-in-1 35A 2-5S BLHELI_S ESC speed controller is presented as one of the budget options for ESC 4-in-1 speed controllers of this kind.

Features:

1. Improved firmware using BLHeliS
2. Ultra Lightweight, and compact size
3. Adaptive timing, compatible with a wide range of motors and Kv
4. Synchronous rectification technology adds efficiency, damped light

Package Includes:

1 x 35A 2-5S BLHELI_S 4 in 1 ESC

Open source BLHELI-S program supports flight control signals such as DSHOT300 600 ONESHOT. With a high-performance processor, the response is fast and the throttle response is fast. A large number of installed experience, stable and reliable, strong overcurrent capacity.

Features:

1. It  is a digital ESC
2. Automatically detects the throttle stroke and neutral position of the throttle
3. It is suitable for nesting boats, remote control cars

Package Includes:

1 x Cyclone 20A BLHeil_S 20A ESC

An opto ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky 30A 2-6S ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 30A 2-6 ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Specifically optimized firmware ESC, the ESC has a very good compatibility
2. Highly intelligent, adaptive ability, extremely easy to use
3. Throttle signal line is a twisted pair, copper wire to reduce cross-talk signal generated
4. Supports up to 621Hz refresh rates up to the throttle signal, compatible with a variety of flight control (Note: More than 500Hz signal of the throttle throttle are all non-standard signal)
5. Use MOSFET special driver chip, performance and stability far beyond the driving circuit with discrete components built

Specifications:

1. Model: 30A 2-6S ESC
2. Cont. Current: 30A
3. Max. Current: 40A
4. Voltage: 4 V-16.8V
5. BEC : No (OPTO ESC)
6. Li-ion/Li0poly: 2-6S
7. Weight: 30g

Packages Includes:

1 x ReadytoSky 30A 2-6S ESC