DYS 60A Brushless Speed Controller ARIA 4-in-1 ESC (Original)

SKU: 867295
In Stock

8,720.00

  1. Strong anti-interference ability
  2. PCB adopts 6-layer, low inner resistance
  3. Built-in Current detection module, which can cooperate with the flight control to detect the current value
  4. Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
  5. The Dshot series calls the 150/300/600/1200
  6. Support 2S-6S, 4PWM input without BEC
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

DYS 60A Brushless Speed Controller ARIA 4-in-1 ESC is a completely digital signal, Oneshot and multishot are analogue signals. During the use of analogue signals, ESC hardware and software will generate some noise, which is clutter. If there are too many clutter, you need to add a filter capacitor or resistor to hardware filtering. (Off-topic, those who need to remove the capacitor is probably the case) and it is a digital signal, do not need to calibrate the ESC, no filtering is required during the transmission!

It is designed for multi-axis UAV transition machines. Accurate speed control, accurate signal acquisition.

ESC comes with a current sensing module that can cooperate with flight control to detect current value. ESC adopts an adaptive control system and is compatible with most motors on the market. The PCB board adopts thickened 6-layer treatment, the internal resistance heat generation is small, the layout of the components is optimized, and the installation is more convenient.


Features:

  1. Strong anti-interference ability
  2. PCB adopts 6-layer, low inner resistance
  3. Built-in Current detection module, which can cooperate with the flight control to detect the current value
  4. The Dshot series calls the 150/300/600/1200
  5. Support 2S-6S, 4PWM input without BEC
  6. Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
  7. You can upgrade the firmware online or change the configuration parameters via the signal line.
  8. ESC comes with a current sensing module that can cooperate with flight control to detect current value.
  9. ESC adopts an adaptive control system and is compatible with most motors on the market.

Package Includes:

1 x DYS 60A ARIA 4-in-1 ESC

2 x Wire 12AWG 100mm (Red + Black)

1 x 470μF 35v Capacitor

1 x XT60H Connector with Housing- Male

1 x Connecting Cable

Additional information

Model

DYS 60A ARIA 4-in-1 ESC

Firmware

BL32.7

Supports Software

DShot/OneShot/MultShot

Operating Voltage (VDC)

2-6s

Continuous Current (A)

60

BEC

NO

Color

Black

Mounting Holes Diameter (mm)

M4

Board Mounting Dimensions

30.5 x 30.5

Dimensions (mm) LxWxH

45 x 42 x 5

Weight (gm)

14.5

Quick Comparison

SettingsDYS 60A Brushless Speed Controller ARIA 4-in-1 ESC (Original) removeT Motor AT 75A 6S removeT Motor FLAME 180A 12S V2.0 removeT Motor Flame 100A 6S ESC removeBidirectional 30A 2-4s UBEC 2A 5V removeT Motor Flame 100A 14S ESC remove
NameDYS 60A Brushless Speed Controller ARIA 4-in-1 ESC (Original) removeT Motor AT 75A 6S removeT Motor FLAME 180A 12S V2.0 removeT Motor Flame 100A 6S ESC removeBidirectional 30A 2-4s UBEC 2A 5V removeT Motor Flame 100A 14S ESC remove
Image
SKU86729513748591330779140297513451651402974
Rating
Price8,720.003,115.0018,275.007,250.00665.0010,830.00
Stock
In Stock
Out of stock
Out of stock
In Stock
Out of stock
In Stock
AvailabilityIn StockOut of stockOut of stockIn StockOut of stockIn Stock
Add to cart

Add to cart

Read more

Read more

Add to cart

Read more

Add to cart

Description
  1. Strong anti-interference ability
  2. PCB adopts 6-layer, low inner resistance
  3. Built-in Current detection module, which can cooperate with the flight control to detect the current value
  4. Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
  5. The Dshot series calls the 150/300/600/1200
  6. Support 2S-6S, 4PWM input without BEC
  1. Product: T Motor AT 75A 6S
  2. Continuous Current: 75 A
  3. Burst Current: 95A
  4. BEC Mode: Switch
  5. BEC Output: 5V/5A
  1. Continuous Current (A): 180
  2. Peak Current (10 sec): 200
  3. BEC: N0
  4. LIPO: 6-12s
  1. Layered structure
  2. Refresh rate: 500Hz, supporting 4-8s lipo
  3. PCB with Nano Technology
  4. CNC aluminum alloy enclosure
  1. Product: Bidirectional 30A 2-4s UBEC 2A 5V
  2. Input voltage: 5V
  3. Frequency PWM: 1000-2000us
  4. Peak Current (A): 30
  1. Input Voltage: 6~14S Lipo
  2. Continuous Current: 100A
  3. Peak Current: 120A
  4. BEC: No

 

 

 

Content

DYS 60A Brushless Speed Controller ARIA 4-in-1 ESC is a completely digital signal, Oneshot and multishot are analogue signals. During the use of analogue signals, ESC hardware and software will generate some noise, which is clutter. If there are too many clutter, you need to add a filter capacitor or resistor to hardware filtering. (Off-topic, those who need to remove the capacitor is probably the case) and it is a digital signal, do not need to calibrate the ESC, no filtering is required during the transmission!

It is designed for multi-axis UAV transition machines. Accurate speed control, accurate signal acquisition.

ESC comes with a current sensing module that can cooperate with flight control to detect current value. ESC adopts an adaptive control system and is compatible with most motors on the market. The PCB board adopts thickened 6-layer treatment, the internal resistance heat generation is small, the layout of the components is optimized, and the installation is more convenient.


Features:

  1. Strong anti-interference ability
  2. PCB adopts 6-layer, low inner resistance
  3. Built-in Current detection module, which can cooperate with the flight control to detect the current value
  4. The Dshot series calls the 150/300/600/1200
  5. Support 2S-6S, 4PWM input without BEC
  6. Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
  7. You can upgrade the firmware online or change the configuration parameters via the signal line.
  8. ESC comes with a current sensing module that can cooperate with flight control to detect current value.
  9. ESC adopts an adaptive control system and is compatible with most motors on the market.

Package Includes:

1 x DYS 60A ARIA 4-in-1 ESC

2 x Wire 12AWG 100mm (Red + Black)

1 x 470μF 35v Capacitor

1 x XT60H Connector with Housing- Male

1 x Connecting Cable

T Motor AT 75A 6S is compatible with various flight-control systems and supports a signal frequency of up to 621 Hz at a. It has a special core program for multi-rotor controllers that greatly improves throttle response and specially optimized software for excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. All settings except the timing are preset, making usage simple, highly intelligent and adaptive.


Features:

  1. Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
  2. 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
  3. Throttle range can be configured and is fully compatible with all transmitters currently available on market.
  4. Smooth, linear and precise throttle response.
  5. Our pocket-sized Program Card can be purchased separately for extremely easily programming the ESC at the field.
  6. With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs that can be selected

Package Includes:

1 x T Motor AT 75A 6S

This T-motor 180A 12S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 180A, and a peak current of up to 200A (10 sec).


Features:

  1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
  2. The throttle range can be configured to be compatible with all transmitters currently available on market.
  3. Smooth, linear, quick, and precise throttle response.
  4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
  5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
  6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  7. USB supported. The firmware of the ESC can be updated by the USB adapter.
  8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

  1. Continuous Current (A): 180
  2. Peak Current (10s): 200
  3. BEC: N0
  4. LIPO: 6-12s
  5. Programmable: No
  6. Dimension: 112 x 51 x 36 mm
  7. Weight: 280 g

Package Includes:

1 x T motor Flame 180A 12S

This T-motor 100A 500Hz 4-8S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Waterproof and Dustproof with IP55 Industrial Standard. This motor is Compatible with U12 Motors and specially designed for multi-rotors. Tiger Flame ESC can give a continuous current of 100A, and a peak current of up to 120A (10S).

Tiger Motor provides professional-level power for large multi-rotor aircraft. The ESC is housed in a machined aluminum case providing both heat dissipation and protection.


Features:

  1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
  2. The throttle range can be configured to be compatible with all transmitters currently available on market.
  3. Smooth, linear, quick, and precise throttle response.
  4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
  5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
  6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  7. USB supported. The firmware of the ESC can be updated by the USB adapter.
  8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

  1. Output: Continuous 100A, Burst 120A up to 10 Secs.
  2. Input Voltage: 4-8 cells lithium battery.
  3. Refresh Rate: 500Hz
  4. Protection: IP57
  5. BEC: No

Package Includes:

1 x T Motor Flame 100A 6S ESC

Bidirectional 30A 2-4s UBEC 2A 5V. It can be used in cars, ships, and underwater thrusters. No need to calibrate the throttle stroke, plug, and play. This product adopts imported components, a full power test. bidirectional  power output, no brake, direct reverse, quick response, and good handling.


Features: 

  1. Provide large output current
  2. Overcurrent and overheat protection function
  3. The max efficiency of the chip is up to
  4. The small size and the light weight make it very convenient to use

Package Includes:

1 x Bidirectional 30A 2-4s UBEC 2A 5V

This T-motor 100A 500Hz 6-14S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Waterproof and Dustproof with IP55 Industrial Standard. This motor is Compatible with U12 Motors and is specially designed for multi-rotors. Tiger Flame ESC can give a continuous current of 100A, and a peak current of up to 120A (10S).


Features:
  1. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  2. 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
  3. The throttle range can be configured and is fully compatible with all transmitters currently available on market.
  4. Smooth, linear, and precise throttle response.
  5. Our pocket-sized Program Card can be purchased separately for extremely easy programming the ESC in the field.
  6. With a program card, you can activate the music-playing function of the ESC, and totally there are 15 songs that can be selected

Package Includes :

1 x T Motor Flame 100A 14S ESC

 

 

 

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

DYS 60A ARIA 4-in-1 ESC

Firmware

BL32.7

Supports Software

DShot/OneShot/MultShot

Operating Voltage (VDC)

2-6s

Continuous Current (A)

60

BEC

NO

Color

Black

Mounting Holes Diameter (mm)

M4

Board Mounting Dimensions

30.5 x 30.5

Dimensions (mm) LxWxH

45 x 42 x 5

Weight (gm)

14.5

Model

AT 75A 6S

Continuous Current

75 A

Burst Current

95A

BEC Mode

Switch

BEC Output

5V/5A

Input Voltage

5V

Peak Current (A)

30

Continuos Current

5A

Model

Flame 100A 14S ESC

Input Voltage

6~14S Lipo

Continuous Current

100A

Peak Current

120A

BEC

No