DYS D2822 1450KV Outrunner Brushless Drone Motor (Original)

SKU: 867296
In Stock

820.00

  1. Model: D2822/14
  2. Operating Voltage: 7.2v~11.1v / 2s~3s Lipo
  3. Kv: 1450 rpm/v
  4. Shaft Diameter: 3mm
  5. Shaft Length: 10mm
  6. Max Watts: 160W
  7. ESC: 30A
  8. Screw Size: M3
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:

Description

This DYS High-Quality D2822 1450KV brushless outrunner motor specifically made to power Quadcopters and Multirotors. It is a 1450kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inches to 10-inch propellers.

The motor comes with 3mm banana male connector attached which can be directly connected with 30A ESC without any soldering requirement

With a 3S LiPo battery, 30A ESC, and high efficiency 10″ propellers, these motors provide up to 800gms of thrust each. Using 4 of these motors on a quadcopter with orange propellers will give you a total of 3.2 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor.  It comes with Bullet Connectors already soldered.

APPLICATION :
  • FPV Racing Drones
  • Quadcopters
  • Multirotors
  • RC Airplanes
  • UAV

Features:

  1. The steel design is capable of withstanding competitive conditions.
  2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
  3. Compact size.
  4. Offers great performance and value for money.
  5. Smooth throttle response for best RC experience.

Package Included:

1 x DYS D2822 1450KV Outrunner Brushless Drone Motor
1 x Prop Adapter
1 x A Motor Holder (X-type) and set of screws
1 x User Manual

Additional information

Model

D2822

Compatible LiPO Batteries

2S ~ 3S

Motor KV (RPM/V)

1450

Shaft Diameter (mm)

3.17

Shaft Length (mm)

10

Maximum Power (W)

160

Compatible Propellers Size (inch)

8 ~ 10

Required ESC (A)

30

Width (mm)

28

Height (mm)

37

Weight (gm)

42

Quick Comparison

SettingsDYS D2822 1450KV Outrunner Brushless Drone Motor (Original) removeT Motor Antigravity MN5008 KV170 removeT Motor Antigravity MN8012 KV100 removeT Motor U15Ⅱ KV100 BLDC drone motor removeT Motor U8II KV100 removeReadytosky MT2204 2300KV CCW Brushless Motor remove
NameDYS D2822 1450KV Outrunner Brushless Drone Motor (Original) removeT Motor Antigravity MN5008 KV170 removeT Motor Antigravity MN8012 KV100 removeT Motor U15Ⅱ KV100 BLDC drone motor removeT Motor U8II KV100 removeReadytosky MT2204 2300KV CCW Brushless Motor remove
Image
SKU86729614029701402972133078114029911423659
Rating
Price820.007,020.0024,470.0055,350.0025,385.00535.00
Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
Out of stock
AvailabilityIn StockOut of stockIn StockIn StockIn StockOut of stock
Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Read more

Description
  1. Model: D2822/14
  2. Operating Voltage: 7.2v~11.1v / 2s~3s Lipo
  3. Kv: 1450 rpm/v
  4. Shaft Diameter: 3mm
  5. Shaft Length: 10mm
  6. Max Watts: 160W
  7. ESC: 30A
  8. Screw Size: M3
  1. KV: 170
  2. Motor size: ø55.6*32mm
  3. Configuration: 24N28P
  4. Shaft Diameter: 6mm
  5. Lead Cable: 80mm
  1. Ultra-light, high efficiency
  2. Max.Thrust:11.8kg,
  3. Motor Weight:351g,
  4. Power Ratio:34
  1. Model: U15Ⅱ KV100
  2. Ideal current: 3.8A
  3. Max. continuous: 143A
  4. Configurations: 36N24P
  5. Internal resistance: 12mΩ
  1. Rated KV:  100
  2. Rated Voltage ( Lipo): 12S
  3. Motor Weight (Incl. Cable): 272g
  4. Propeller Recommendation: 27-28″
  1. Product: Readytosky MT2204 2300KV CCW Brushless Motor
  2. Compatible for: 5 inch Propeller
  3. Compatible With: 2S-3S Lipo Batteries
  4. Maximum Current: 25 A
Content

This DYS High-Quality D2822 1450KV brushless outrunner motor specifically made to power Quadcopters and Multirotors. It is a 1450kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inches to 10-inch propellers.

The motor comes with 3mm banana male connector attached which can be directly connected with 30A ESC without any soldering requirement

With a 3S LiPo battery, 30A ESC, and high efficiency 10″ propellers, these motors provide up to 800gms of thrust each. Using 4 of these motors on a quadcopter with orange propellers will give you a total of 3.2 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor.  It comes with Bullet Connectors already soldered.

APPLICATION :
  • FPV Racing Drones
  • Quadcopters
  • Multirotors
  • RC Airplanes
  • UAV

Features:

  1. The steel design is capable of withstanding competitive conditions.
  2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
  3. Compact size.
  4. Offers great performance and value for money.
  5. Smooth throttle response for best RC experience.

Package Included:

1 x DYS D2822 1450KV Outrunner Brushless Drone Motor
1 x Prop Adapter
1 x A Motor Holder (X-type) and set of screws
1 x User Manual

T-Motor’s MN5008 series is an ultralight, endurance-focused motor that was specially designed for various surveying applications. These motors are great for aerial photography!


Features:

  1. Ultra-light, high efficiency
  2. Devote to a long flight
  3. Quadcopter of 4kg, 60mins flight time
  4. Run smoothly, low cogging torque

Specifications:

  1. KV: 170
  2. Motor size: ø55.6*32mm
  3. Configuration: 24N28P
  4. Shaft Diameter: 6mm
  5. Lead Cable: 80mm
  6. Idle Current (22V): 0.4A
  7. Max. Power (180s): 720W
  8. Internal Resistance: 720mΩ
  9. Rated Voltage (Lipo): 6-12S
  10. Peak Current (180s): 15A
  11. ESC Recommendation: AIR 40A
  12. Prop Recommendation: P17-18″

Package Includes:

1 x T Motor Antigravity MN5008 KV170

T Motor Antigravity MN8012 KV100 is a brushless drone motor that has high power, a fast reaction speed, and stable operation. MN8012 series Brushless motor from tiger motors provides high efficiency, low power consumption, and energy-saving performance


Features:

  1. Ultra-light, high efficiency
  2. Max.Thrust:11.8kg,
  3. Motor Weight:351g,
  4. Power Ratio:34
  5. 220ºC high-temperature resistance Wires
  6. Anti-rust treatment Stator with 180°C high temperature-resisting coatings

Specifications:

  1. Configuration: 36N42
  2. PRated Voltage(Lipo) 12S
  3. Internal Resistance: 85mΩ
  4. Rated KV: 100
  5. Idle Current (24V): 1.0A
  6. Peak Current (180s): 40A
  7. Max. Power (180s): 1873W
  8. Motor Size: Φ87.8 * 29mm
  9. Shaft Diameter IN: 12mm Bearing Imported 6901ZZ
  10. Magnet Level: 180t high-temperature resistance
  11. Cable Size: 16AWG*90mm Copper
  12. Coil Insulation Test 1OOOV/Ss
  13. Rotor Dynamic Balance Standard 15Mg
  14. Protection: IP IP35
  15. Weight (with Cable): 351 g
  16. Package Weight: 600 g

Package Includes:

1 x T Motor Antigravity MN8012 KV100

High efficient magnets are adopted to U15Il for stable output and constant efficiency in harsh environment. Simulated analyses are carried out based on the stress under operating condition in axial and radial directions. Redesigned custom bearing contribute to prolong the bearing life to 1000h under trouble-free operation. Wound with military grade high-temperature resistant enameled wires: Level C temperature resistance.


Features:

  1. For freight transport and manned uav programs
  2. Safe,stable,reliable
  3. Higher waterproof and dust-resistance level

Specifications:

  1. Model: U15Ⅱ KV100
  2. Ideal current: 3.8A
  3. Max. continuous: 143A
  4. Configurations: 36N24P
  5. Internal resistance: 12mΩ
  6. Shaft diameter: 12mm
  7. Lead: Enameled wired
  8. No. of cell lipo: 12-24s
  9. Cable length: 100mm
  10. KV: KV100
  11. Motor diameter: 147.5 x 55mm

Packages Includes:

1 x T Motor U15Ⅱ KV100 BLDC drone motor

 

T Motor U8II KV100 is a powerful drone motor having small permanent magnets made from iron and cobalt alloys. Using special alloys in the magnets makes them able to be smaller and lighter. Lithium-ion batteries are currently used to power drones as the weight-to-power storage ratio is better than any other battery.

This latest drone motor comes with curved magnets and silver winding on the stator  which improves the faster response of the motor to control the speed of the motor for easy control over Aircraft


Features:

  1. Silver winding for faster response
  2. Specially design curved Magnets
  3. Efficiency increased by 15%
  4. Improved Temperature efficiency
  5. Flight time 5% longer
  6. Max. Thrust 7.3kg
  7. Motor protection IP55
  8. Motor service life– 1500 flights (40mins/flight)

Specifications:

  1. Rated KV:  100
  2. Rated Voltage ( Lipo): 12S
  3. Motor Weight (Incl. Cable): 272g
  4. Propeller Recommendation: 27-28″
  5. Idle Current ( 18V ): 0.7A
  6. Internal Resistance 170±5m0
  7. Peak Current ( 180s ) 29.3A

Package Includes:

1 x T Motor U8II KV100

One goal in mind guided the design of the Readytosky MT2204 2300KV Brushless Motor: increasing multirotor performance. The MT2204 2300KV from Readytosky is the new benchmark for multirotor performance. Each motor is designed for a particular kind or application, enabling ongoing improvement and efficiency/power optimization.

The best quality materials, including Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen-free copper wire, 0.005g balancing, and the ideal wind laydown, went into its construction. The MT2204-2300KV Multi-Rotor Motor is 100% QC authorised, and after that, each motor’s design is examined for its type of application, taking into account everything from mounting to prop type adapters.

The bottom motor frame is chamfered for easier installation on narrower frames and has enough of height for mounting hardware to winding clearance.The performance of Multistar Elite speaks for itself, and it is unrivalled in terms of quality and value. It may be used in conjunction with Orange Series HD 5′′ Propeller and Orange 3S Premium Li-PO for an exceptional multirotor flight experience.Worry no more if you are unsure of the ideal motor to use while constructing a drone since we’ve got you covered. We offer everything you need at Robu to get your drone idea off the ground


Features:

  1. provides superior Japan Bearings for efficient operation.
  2. Long-lasting N45SH magnets are in it.
  3. For the optimum operational qualities, 2mm Laminations were used in the design.
  4. They are more durable in class thanks to 180deg oxygen-free copper wire.
  5. 0.005 g or better balance is shown.
  6. flawless lay-down windings

Package Includes:

1 x Readytosky MT2204 2300KV CCW Brushless Motor

 

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

D2822

Compatible LiPO Batteries

2S ~ 3S

Motor KV (RPM/V)

1450

Shaft Diameter (mm)

3.17

Shaft Length (mm)

10

Maximum Power (W)

160

Compatible Propellers Size (inch)

8 ~ 10

Required ESC (A)

30

Width (mm)

28

Height (mm)

37

Weight (gm)

42

Maximum Voltage(V)

15

Peak Current (A)

25

Maximum Power (W)

350

Rotational Degree

360

Motor KV (RPM/V)

2300 KV

No Load Current (mA)

0.6A @10V

Shaft Diameter (mm)

5

Compatible Propellers Size (inch)

5 inch Propeller

Compatible LiPO Batteries

2S-3S Lipo Batterries