This DYS D2826 2200KV brushless outrunner motor specifically made to power Quadcopters and Multirotors. It is a 2200kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 7 propellers.

The motor comes with 3mm banana male connector attached which can be directly connected with 30A ESC without any soldering requirement

With a 3S LiPo battery, 40A ESC, and high efficiency 10″ propellers, these motors provide up to 960gms of thrust each. Using 4 of these motors on a quadcopter with orange propellers will give you a total of 3.84 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor.  It comes with Bullet Connectors already soldered.

APPLICATION :

• Drones
• Quadcopters
• Multirotors
• RC Airplanes
• UAV

Features:

1. The steel design is capable of withstanding competitive conditions.
2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
3. Compact size.
4. Offers great performance and value for money.
5. Smooth throttle response for best RC experience.

Package Included:

1 x DYS D2826 2200KV Outrunner Brushless Drone Motor

1 x Prop Adapter
A Motor Holder (X-type) and set of screws

The engineers at Emax are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.

In order to improve the performance of its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust are generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone.

Features:

1. Precision bearing
2. Steel shaft
3. Anodizing
4. 19 x 19mm hole pattern
5. Multi-strand winding .

Specifications:

1. Model: Emax ECOII-2207-2400KV
2. KV: 2400KV
3. Framework: 12n14p
4. Length: 33.1mm
5. Diameter: 27.5mm
6. No. of Cells: 3-4s
7. Maximum Thrust: 1760g(on 4s)
8. Propeller: 5″-5.5″
9. Weight: 33.5g (w/o silicone wire)
10. Propeller adaptor shaft thread: M5

Package Includes:

5 x M3 x 8mm Screw

5 x M3 x 7mm screw

5 x M3 x 6mm screw

1 x Aluminium M5 nylock nut

1 x Washer and screw for shaft

T-MOTOR V505 KV260 Brushless Motor For Vertical Take-off And Landing Fixed-wing VTOL Rotor UAV Power Motor designed for VTOL power system with abundant power, big bull-to-weight ratio strong overload ability & environment adaptiveness features guarding for every flight. Optimized special high temperature-resistant enameled wire high temperature resistant curved magnets strengthen the passive heat-resistant ability. centrifugal  fan structure, improving the active hand dissipation capacity of the motor

Features:

1. Sharp Take off and Steady Landing
2. Strong overload ability & environmental adaptiveness
3.  No need for a power replacement power setup in 3000 meters Below altitude environment

Specifications:

1.  Motor/KV : V505 KV260
2. Motor Size (mm): φ55.6*38.9
3. Stator Technology: Anti-rust Treatment 180°c high-temperature resisting coating
4. Configuration: 24N28p
5. Shaft Diameter (mm): IN:6 OUT:4
6. Bearing: Imported 696zz
7. Magnet Temperature Resistance Grade: class E 150°c
8. Lead (mm): 16AWG*600
9. Coil Withdraw Voltage: 500v/5s
10. Rotor Dynamic Balanced Standard (mg):<5mg

Package Includes:

1 x T Motor V505 KV260

T-Motor’s MN5008 series is an ultralight, endurance-focused motor that was specially designed for various surveying applications. These motors are great for aerial photography!

Features:

1. Ultra-light, high efficiency
2. Devote to a long flight
3. Quadcopter of 4kg, 60mins flight time
4. Run smoothly, low cogging torque

Specifications:

1. KV: 170
2. Motor size: ø55.6*32mm
3. Configuration: 24N28P
4. Shaft Diameter: 6mm
5. Lead Cable: 80mm
6. Idle Current (22V): 0.4A
7. Max. Power (180s): 720W
8. Internal Resistance: 720mΩ
9. Rated Voltage (Lipo): 6-12S
10. Peak Current (180s): 15A
11. ESC Recommendation: AIR 40A
12. Prop Recommendation: P17-18″

Package Includes:

1 x T Motor Antigravity MN5008 KV170

The engineers at Emax are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.

In order to improve the performance of its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust are generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone.

Features:

1. Precision bearing
2. Steel shaft
3. Anodizing
4. 19 x 19mm hole pattern
5. Multi-strand winding .

Specifications:

1. Model: Emax ECOII-2207-1600KV
2. KV: 1600KV
3. Framework: 12n14p
4. Length: 19.2mm
5. Diameter: 24.7mm
6. No. of Cells: 4-6s
7. Maximum Thrust: 950g(on 6s)
8. Propeller: 4″-5″
9. Weight: 16.6g (w/o silicone wire)
10. Shaft diameter: 1.5mm

Package Includes:

5 x M2 x 6mm Screw

5 x M2 x 7.5mm screw

3 x M2 x 8.5mm screw

1 x Aluminium M5 nylock nut

1 x Washer and screw for shaft

This A2217 2300KV brushless out-runner motor specifically made to power Quadcopters and Multirotors. It is a 2300kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 7 propellers.

The motor comes with 3mm banana male connector attached which can be directly connected with 30A ESC without any soldering requirement

With a 3S LiPo battery, 40A ESC, and high efficiency 10 propellers, these motors provide up to 960gms of thrust each. Using 4 of these motors on a quadcopter with propellers will give you a total of 3.84 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor. It comes with Bullet Connectors already soldered.

Applications:

1. Drones
2. Quadcopters
3. Multirotors
4. RC Airplanes
5. UAV

Features:

1. The steel design is capable of withstanding competitive conditions.
2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
3. Compact size.
4. Offers great performance and value for money.
5. Smooth throttle response for best RC experience.

Specifications:

1. Dimensions: 27.8 x 32mm
2. Weight: 68 grams
3. Output shaft diameter: 4.0mm
4. Efficiency: 78%
5. No load current / 10V: 1.7A
6. Current: 30A/60S
7. Efficiency current: 8-28A (>70%)

Packages Includes:

1 x A2217 2300KV RC Brushless Out-runner Motor welded Banana Connector (Male)