This F1407 Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

It is a pack of SE1407 3600KV CW CCW Brushless Motor for Drone with BL20A BLheli firmware ESC and X40403 Propeller Set. This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance in the fly.

These Racing/ fixed-wing/ Brushless/ UAV Motor for drones are imported from China. Our quality control team then test some of the random motors from each batch before setting them on sale.

X40403 Props included fits perfectly in this pack. There is 1 extra pair of propellers in this pack. These props are light in weight and they are high strength propellers.

SE1407 Motor

DYS Race Edition Series delivers exactly what quad racing pilots have been looking for from motors in this tough and demanding class.

With imported NMB bearings, N52 magnets, and 0.2mm laminations. The Race Edition Series of motors are capable of producing a massive 450g of thrust! And that’s more than enough to transform your quad into a serious racing contender.

BL20A BLHeli firmware ESC

The new DYS BLHeli series speed controllers are quickly becoming the most popular ESCs amongst drone racing enthusiasts and with good reason. They are ultra-small, very light, and arrive flashed with the best multirotor firmware out there, namely BLHeli. Being specifically designed for multirotor use, they are tuned to deliver an ultra-fast throttle response, which helps to improve stability and give you that much sought-after locked-in feeling!

Tri-Blade Propellers

These Tri-Blade Propellers made up of  Glass Fiber Nylon is high-quality propellers specially designed for high-Speed racing multi-copters.

With a Lightweight blade and less moment of inertia, these PROPS have smooth turning performance and fast response. The professional pneumatic outlook design and high precision production quality provide a strong thrust for Props.

The Advance Polycarbonate material provides good dash and bending resistance and hence it this propeller gives the best efficiency and ultra-durability.

Note:  The Propeller dimensions and weight may have  ±2% error.

We at Robu.in passionately deal in this Multicopter/Drone area to encourage and help many DIY makers by supplying every essential product to build and enrich Multicopters/Drones.

Features:

SE1407 Motor

1. New design with imported NMB bearing
2. N52 magnet and 0.2mm lamination
3. Powerful with 450g thrust to work with 4″ Prop
4. Special design for the FPV racer champions

BL20A BLHeli firmware ESC

1. Designed specifically for multi-rotors
2. Tiny form factor and low weight
3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
5. Twisted signal cable reducing the crosstalk during signal transfer
6. Feature all new ultra-low resistance MOSFETs for superior current handling
7. Thick PCB for better heat dissipation
8. High-performance capacitor filter

Tri-Blade Propellers

1. Very strong, lightweight, and fast response
2. Quick to release, quick to attach
3. Good efficiency and Ultra-durable
4. Compatible with SE1407 CW CCW motors
5. Durable plastic construction provides both lightness and rigidity.
6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Specifications:

SE1407 Motor

1. KV: 3600
2. Configuration: NP
3. Stator Diameter: 14.0mm
4. Stator Length: 7.0mm
5. Shaft Diameter: 3.0mm
6. Motor Dimensions (Dia.*Len): Φ18.3×16.0mm
7. Weight (g): 14g
8. of Cells(Lipo): 3-4S
9. Max Continuous Current (A): 17.3A
10. Max Continuous Power (W): 256.0W
11. Internal resistance: 0.16Ω

BLHeli 20A Opto ESC

1. BEC: OPTO
2. Input voltage: 2-4s Lipo
3. Signal Frequency: 20-500Hz
4. Output PWM Frequency: 18KHz
5. Come with BLHeli: Yes
6. Application: Compatible with SimonK and BLHeli
7. Dimensions (LxWxH): 23x12x4.5mm
8. Weight: 12g (with wire)

4 x 4 x 3R Propellers

1. Hi-Performance Prop FPV 3 blade bullnose propeller 4040 CW/CCW
2. Material: PC
3. Size: 4 x 4 x 3R
4. Hub inner diameter(ID): M5
5. Hub thickness: 7mm
6. Weight: 3g/pcs
7. Color: Green and Red

Package Includes :

4 x SE1407 3600KV CW CCWKV Brushless Motor
4 x Set of Motor Accessories
4 x BL20A BLheli firmware ESC
6 x  Propellers(3CW, 3CCW).

Build your small indoor DIY done with this QX95 Quad-copter Combo Kit. This is QX95 Brushed Quad-copter Combo Kit will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles, and began soldering. This kit has very good products and is available at an affordable cost.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

We’ve heard from a lot of people who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose of providing a Brushed Quad-copter Combo Kit needed to build a quadcopter. Here’s what the kit contains

QX95 Brushed Quad-copter Frame

Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This QX95 Brushed Quad-copter Frame is a well thought out brushed quad frame built from quality materials.

More information about QX95 Brushed Quad-copter Frame is available at Robu.in.

55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter

These are 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter. The propellers with a 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors.

More information about 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter is available on Robu. in

8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

If you are new in the multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotor!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.

More Information about 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW is available on Robu.in

Package Includes:

1 x QX95 Brushed Quad-copter Frame
1 x Radiolink Flight Control
4 x 55mm (2.2inch) Blade Propeller Propeller Quadcopter
1 x 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU + PX4IO.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

Note: Product image may vary from the actual product.

Specifications and Features:

Pixhawk V2.4.8 Flight board:

1. The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
2. 14 PWM / servo output.
3. Bus interface (UART, I2C, SPI, CAN).
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
5. Provide automatic and manual modes.
6. Provide redundant power input and failover.
7. Multicolor LED lights.
8. Provide a multi-tone buzzer Interface.
9. Micro SD recording flight data.

Processor:

Sensors:

Interfaces:

1. Color: Black
2. Material: Glass-fiber
3. Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 145mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Compact size
2. High performance
3. Lightweight and Durable.
4. Made by super strong and advanced engineering material.
5. The frame has excellent strength.
6. Equips vibration-free mounting bracket for FPV camera.
7. This is DIY drone Frame Kit for your projects

Specifications:

1. Wheelbase: 145mm
2. Weight: 50G
3. Material: Carbon Fiber
4. Thickness: upper plate 2.0mm, side plate 2.0mm, bottom plate 2.0mm, splint 2.0mm, machine arm 4.0mm
5. Paddle: 3.0 inch paddle
6. Flight control hole distance: 20 x 20mm (M2)
7. The distance between the rear image transmission holes: 20*20mm (M2)
8. Camera installation width: 14mm
9. Motor mounting holes: 9 x 9mm(M2), 12 x 12mm(M2)
10. Adapt to the VISTA sky terminal
11. Adapt 915 antenna

Packages Includes:

1 x Mark’3 145mm Carbon Fiber Frame Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

IX2 90mm Micro FPV Racing Kit

This IX2 90mm Micro FPV Racing Drone Frame. This Frame is built Specially to tackle the Problems in Racing and Video recording with Quadcopter. This Frame is built with carbon fiber and It has Good Electrical Properties and Good Tensile Strength. The IX2 90mm Micro FPV Racing Drone Frame is composed of carbon fiber, making it strong and long-lasting because of its excellent rigidity to weight ratio, carbon fiber is the most used material for the frame design. Carbon Fiber Frames are extremely stiff, which improves flight stability and performance. The wheelbase of this product is approximately 90mm. It has a huge space in the mainframe where the camera and other accessories can be mounted. The frame is light and has substantial arms, allowing it to provide strong mechanical strength. The frame’s aerodynamic efficiency is enhanced by the small design.

More information about HSKRC 3 Inch 140mm Carbon Fiber Racing Frame is available at Robu.in.

Explore our Drone parts category for other accessories like propellers, FPV cameras, Telemetry, and Remote Transmitter and Receiver. Click Here

Diagram:

Package Includes:

 1 x IX2 90mm Micro FPV Racing Drone Frame

4 x Readytosky 1104-7500kv Mini Brushless Motor

2 x 2 pairs 2030 3 blades 2 inch Clear Propeller CW&CCW

1 x MINI F4+OSD Flight Controller

1 x Electronic Speed Controller

1 x Drone Camera

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

Features:

1. Carbon Fiber and 3D printed material
2. Lightweight and Durable.
3. The frame has Excellent Strength.
4. No trouble in racing indoor and outdoor.

Specifications:

1. Model: Capro X’3
2. Wheelbase: 155mm
3. Structure: HX type split
4. Material: 3K Carbon Fiber
5. Bottom Plate Thickness: 3mm
6. Upper Plate Thickness: 1.5mm
7. Internal Standoff Height: about 30mm

Package Includes;

1 x Capro- X’3 HX155mm FPV Racing Kit

Kit Includes:

1 x Capro-X’3 HX155mm FPV Racing Drone Frame with Prop Protectors
1 x Fitting  Bolts and stand off set 
1 x Mini Flytower F4+OSD Flight Controller

1 x CMOS 1/3 700TVL 1.2 mm FPV Camera 
1 x XF5805 V6.1 5.8G FPV transmitter
1 x 5.8G 5 dBi Micro Antenna with RP-SMA Connector for XF5805

1 x 2S~3S 4in1 Brushless ESC for 3800KV Brushless Motor
2 x Ready to Sky 3800KV Brushless Motor-CW 
2 x Ready to Sky 3800KV Brushless Motor-CCW
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Black
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Red

1 x Brackets, Damping Pad and Accesories Set