This F2204 Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

BE2204 Brushless Motors

This combo set with  BE2204 Motor is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor . These Racing/ fixed-wing/ Brushless/ UAV Motor for drones are imported from China. Our quality control team then test some of the random motors from each batch before setting them on sale to assure you the best-tested Quality.

This 2400KV Racing/ fixed-wing/ Brushless/ UAV Motor is equipped with a solid metal case which makes it reliable and durable. It is a pack of BE2204 2400KV CW CCW Brushless Motor for Drone with BL30A BLHeli firmware ESC and ABS5030 Propeller Set.

ABS5030 Propellers

ABS5030 Props included fits perfectly in this pack. There is 1 extra pair of propellers in this pack. These props are light in weight and they are high strength propellers.

BL30A BLHeli firmware ESC

The new DYS BLHeli series speed controllers are quickly becoming the most popular ESCs amongst drone racing enthusiasts and with good reason. They are ultra-small, very light and arrive flashed with the best multirotor firmware out there, namely BLHeli. Being specifically designed for multirotor use, they are tuned to deliver an ultra-fast throttle response, which helps to improve stability and give you that much sought-after locked-in feeling!

Note: Product colour may vary from the images shown.

Features:

1. BE2204 Motor

1. New design with imported NMB bearing
2. Powerful with 680g thrust.
3. Special design for the FPV racer champions

2. BL30A BLHeli firmware ESC

1. Designed specifically for multi-rotors
2. Tiny form factor and low weight
3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
5. Twisted signal cable reducing the crosstalk during signal transfer
6. Feature all new ultra-low resistance MOSFETs for superior current handling
7. Thick PCB for better heat dissipation
8. High-performance capacitor filter

3. ABS6045 Two-blade Propellers

1. Comes with thin and wide blades
2. 5030(5 x 3) Propellers features an epoxy resin cover.
3. Quick to release, quick to attach
4. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Specifications:

Motor:

1. KV: 2400
2. Configuration: 12N14P
3. Stator Diameter: 22.0mm
4. Stator Length: 4.0mm
5. Shaft Diameter: 3.0mm
6. Motor Dimensions (Dia.*Len): Φ27×16.5mm
7. Weight (g): 23g
8. of Cells(Lipo): 3-4S
9. Max Continuous Current (A): 18.9A
10. Max Continuous Power (W): 279.7W
11. Internal resistance: 0.013Ω

ESC:

1. Model: BL30A / SN30A
2. Battery: 6-22.2V (2-6S Lipo)
3. Current Rating: 30amp / 35amp burst
4. BEC: No (OPTO)
5. Signal frequency: 20-500Hz
6. Output PWM frequency: 18KHz
7. Firmware: BLHeli (also compatible with SimonK)
8. Size: 45×16.6×5.5mm
9. Weight: 14.5g

ABS5030 Two-Blade Propellers:

1. Hi-Performance Prop FPV 2 blade bullnose propeller ABS5030 CW/CCW
2. Material: PC
3. Size: 5 x 3
4. Hub inner diameter(ID): M5
5. Hub thickness: 6.3mm
6. Weight: 2.4g/pcs
7. Color: Green and Orange.

Package Includes :

4 x BE2204 1950KV CW CCW KV Brushless Motor
4 x Set of Motor Accessories
4 x BL30A BLheli firmware ESC
6 x ABS5030 Propellers(3CW, 3CCW).

The Mark4 6 Inch 260mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

The Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 260mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit

This F2206 Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

BE2206 Motor

These Racing/ fixed-wing/ Brushless/ UAV Motor for drones are imported from China. Our quality control team then test some of the random motors from each batch before setting them on sale. This 1950kv Racing/ fixed-wing/ Brushless/ UAV Motor is equipped with a solid metal case which makes it reliable and durable.

BL30A BLHeli firmware ESC

The new DYS BLHeli series speed controllers are quickly becoming the most popular ESCs amongst drone racing enthusiasts and with good reason. They are ultra-small, very light and arrive flashed with the best multirotor firmware out there, namely BLHeli. Being specifically designed for multirotor use, they are tuned to deliver an ultra-fast throttle response, which helps to improve stability and give you that much sought-after locked-in feeling!

ABS6045 Two-Blade Propellers

These Two-Blade Propellers made up of  Glass Fiber Nylon is high-quality propellers specially designed for high-Speed racing multi-copters.

With a Lightweight blade and less moment of inertia, these PROPS have smooth turning performance and fast response. The professional pneumatic outlook design and high precision production quality provide a strong thrust for Props.

The Advance Polycarbonate material provides good dash and bending resistance and hence it this propeller gives the best efficiency and ultra-durability.

Note:  The Propeller dimensions and weight may have  ±2% error.

We at Robu. passionately deal in this Multicopter/Drone area to encourage and help many DIY makers by supplying every essential product to build and enrich Multicopters/Drones.

Specifications:

BE2206 Motor

1. KV: 1950
2. Configuration: NP
3. Stator Diameter: 22.0mm
4. Stator Length: 6.0mm
5. Shaft Diameter: 3.0mm
6. Motor Dimensions (Dia.*Len): Φ27×18.5mm
7. Weight (g): 30g
8. of Cells(Lipo): 2-3S
9. Max Continuous Current (A): 14.7A
10. Max Continuous Power (W): 163.0W
11. Internal resistance: 0.098Ω

ESC:

1. Model: BL30A / SN30A
2. Battery: 6-22.2V (2-6S Lipo)
3. Current Rating: 30amp / 35amp burst
4. BEC: No (OPTO)
5. Signal frequency: 20-500Hz
6. Output PWM frequency: 18KHz
7. Firmware: BLHeli (also compatible with SimonK)
8. Size: 45×16.6×5.5mm
9. Weight: 14.5g

ABS6045 Two-Blade Propellers

1. Hi-Performance Prop FPV 2 blade bullnose propeller ABS6045 CW/CCW
2. Material: PC
3. Size: 6 x 4.5
4. Hub inner diameter(ID): M5
5. Hub thickness: 7mm
6. Weight: 3.8g/pcs
7. Colour: Green and Orange

Features:

BE2206 Motor

1. New design with imported NMB bearing
2. Powerful with 680g thrust.
3. Special design for the FPV racer champions

BL30A BLHeli firmware ESC

1. Designed specifically for multi-rotors
2. Tiny form factor and low weight
3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
5. Twisted signal cable reducing the crosstalk during signal transfer
6. Feature all new ultra-low resistance MOSFETs for superior current handling
7. Thick PCB for better heat dissipation
8. High-performance capacitor filter

ABS6045 Two-blade Propellers

1. Comes with thin and wide blades
2. 6045(6×4.5) Propellers features an epoxy resin cover.
3. Quick to release, quick to attach
4. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Package Includes :

4 x BE2206 1950KV CW CCW KV Brushless Motor
4 x Set of Motor Accessories
4 x BL30A BLheli firmware ESC
6 x ABS6045 Propellers(3CW, 3CCW).

The Mark4  7Inch 295mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 295mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 7inch 295mm Carbon Fiber Frame Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

Features:

1. Carbon Fiber and 3D printed material
2. Lightweight and Durable.
3. The frame has Excellent Strength.
4. No trouble in racing indoor and outdoor.

Specifications:

1. Model: Capro X’3
2. Wheelbase: 155mm
3. Structure: HX type split
4. Material: 3K Carbon Fiber
5. Bottom Plate Thickness: 3mm
6. Upper Plate Thickness: 1.5mm
7. Internal Standoff Height: about 30mm

Package Includes;

1 x Capro- X’3 HX155mm FPV Racing Kit

Kit Includes:

1 x Capro-X’3 HX155mm FPV Racing Drone Frame with Prop Protectors
1 x Fitting  Bolts and stand off set 
1 x Mini Flytower F4+OSD Flight Controller

1 x CMOS 1/3 700TVL 1.2 mm FPV Camera 
1 x XF5805 V6.1 5.8G FPV transmitter
1 x 5.8G 5 dBi Micro Antenna with RP-SMA Connector for XF5805

1 x 2S~3S 4in1 Brushless ESC for 3800KV Brushless Motor
2 x Ready to Sky 3800KV Brushless Motor-CW 
2 x Ready to Sky 3800KV Brushless Motor-CCW
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Black
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Red

1 x Brackets, Damping Pad and Accesories Set

The Assassin 5 inch 222mm Drone Racing frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 222mm. It features a very large area on the mainframe for mounting cameras and other accessories. 

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Assassin 5 inch 222mm Drone Racing frame Kit

Kit Includes:

1 x Assassin 5 inch 222mm Drone Racing frame and Accessories

1 x black zip ties(10 pcs)