DYS XSD12A ESC Solder Version (Original)

SKU: 867288
Out of stock

738.00

Add to Wishlist
Add to Wishlist
  1. Model: XSD12A Solder version
  2. Processor: Silabs EFM8BB21
  3. Battery: (2-3S Lipo)
  4. Current Rating: 12amp
  5. BEC: No (OPTO)
  6. Signal frequency: 20-500Hz
  7. Firmware: BLHeli_S (bootloader and firmware)
  8. Supports: 1-2ms signal, Dshot600/Dshot300
  9. BLHeli_S does Damped Light only
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

Take advantage of the latest DYS XSD12A ESC Solder Version BLHeli_S development with these DShot capable ESCs. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilizes a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.


Features: 

  1. Utilizes high-performance EFM8BB21 50MHz MCU
  2. 12 FET Design
  3. High-current burst rating
  4. High-Resolution Throttle steps
  5. Supports: BLheli_S & Dshot600, Dshot300 – faster than Oneshot
  6. Dshot ESCs don’t require an ESC calibration
  7. Firmware upgradable via signal wire (works with USB Linker for XM series)
  8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS XSD12A ESC Solder Version

Additional information

Model

XSD12A

Supports Software

DShot300/DShot600

Firmware

BLheli_S

BEC

NO

MCU

Silabs EFM8BB21

Continuous Current (A)

12

Operating Voltage (VDC)

2-4s LiPo

Color

Black

Dimensions (mm) LxWxH

15.4 x 11.5 x 4

Weight (gm)

1.2

Quick Comparison

SettingsDYS XSD12A ESC Solder Version (Original) removeT Motor FLAME 80A 12S V2.0 ESC removeT Motor FLAME 180A 12S V2.0 removeHobbywing Xrotor-40A 2-6S ESC remove40A 2-6S ESC remove35A 2-5S BLHELI_S 4 in 1 ESC remove
NameDYS XSD12A ESC Solder Version (Original) removeT Motor FLAME 80A 12S V2.0 ESC removeT Motor FLAME 180A 12S V2.0 removeHobbywing Xrotor-40A 2-6S ESC remove40A 2-6S ESC remove35A 2-5S BLHELI_S 4 in 1 ESC remove
Image
SKU86728814029771330779134517813953581371786
Rating
Price738.009,165.0018,275.001,485.00849.002,670.00
Stock
Out of stock
In Stock
Out of stock
Out of stock
Out of stock
Out of stock
AvailabilityOut of stockIn StockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Add to cart

Read more

Read more

Read more

Read more

Description
  1. Model: XSD12A Solder version
  2. Processor: Silabs EFM8BB21
  3. Battery: (2-3S Lipo)
  4. Current Rating: 12amp
  5. BEC: No (OPTO)
  6. Signal frequency: 20-500Hz
  7. Firmware: BLHeli_S (bootloader and firmware)
  8. Supports: 1-2ms signal, Dshot600/Dshot300
  9. BLHeli_S does Damped Light only
  1. Layered structure
  2. Refresh rate: 600Hz, supporting 6-12s lipo
  3. PCB with Nano Technology
  4. CNC aluminum alloy enclosure
  1. Continuous Current (A): 180
  2. Peak Current (10 sec): 200
  3. BEC: N0
  4. LIPO: 6-12s
  1. Model Number:XRotor-40A
  2. Cont.Current:40A
  3. Burst Current(10sec):60A
  4. BEC:None
  5. Lipo:2-6S
  6. Programming:Timing (high/middle)
  7. Weight:26g
  1. Brand: Ready to sky
  2. Model: ReadytoSky 2-6S 40A
  3. Current: 40A
  4. Burst Current(10sec): 60A
  5. Weight: 26g
  1. Product: 35A 2-5S BLHELI_S 4 in 1 ESC
  2. Working current: 35A
  3. Input voltage: 2-5S LiPo
  4. Firmware: BLHeli_S
  5. Firmware Target: JH-30 JH-25
Content

Take advantage of the latest DYS XSD12A ESC Solder Version BLHeli_S development with these DShot capable ESCs. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilizes a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.


Features: 

  1. Utilizes high-performance EFM8BB21 50MHz MCU
  2. 12 FET Design
  3. High-current burst rating
  4. High-Resolution Throttle steps
  5. Supports: BLheli_S & Dshot600, Dshot300 – faster than Oneshot
  6. Dshot ESCs don’t require an ESC calibration
  7. Firmware upgradable via signal wire (works with USB Linker for XM series)
  8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS XSD12A ESC Solder Version

The Flame 80A HV V2 ESC by Tiger Motor provides professional-level power for large multi-rotor aircraft. The ESC is housed in a machined aluminum case providing both heat dissipation and protection.


Features:

  1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
  2. The throttle range can be configured to be compatible with all transmitters currently available on market.
  3. Smooth, linear, quick, and precise throttle response.
  4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
  5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
  6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  7. USB supported. The firmware of the ESC can be updated by the USB adapter.
  8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

  1. Output: Continuous 80A, Burst 105A up to 10 Secs.
  2. Input Voltage: 6-12 cells lithium battery.
  3. Refresh Rate: 600Hz
  4. Protection: IP57
  5. BEC: No
  6. Signal Frequency: Up to 621Hz
  7. Size: 77mm (L) x 35mm (W) x 18mm (H).
  8. Weight: 94g.

Package Includes:

1 x T Motor FLAME 80A 12S V2.0 ESC

This T-motor 180A 12S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 180A, and a peak current of up to 200A (10 sec).


Features:

  1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
  2. The throttle range can be configured to be compatible with all transmitters currently available on market.
  3. Smooth, linear, quick, and precise throttle response.
  4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
  5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
  6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  7. USB supported. The firmware of the ESC can be updated by the USB adapter.
  8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

  1. Continuous Current (A): 180
  2. Peak Current (10s): 200
  3. BEC: N0
  4. LIPO: 6-12s
  5. Programmable: No
  6. Dimension: 112 x 51 x 36 mm
  7. Weight: 280 g

Package Includes:

1 x T motor Flame 180A 12S

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.


Features:

  1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
  2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
  3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
  4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
  5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
  6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
  7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

An opto ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky 40A 2-6S ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 40A 2-6 ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.


Features: 

  1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
  2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
  3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
  4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
  5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
  6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
  7. Ultra-low resistance MOSFET, strong flow capacity

Specifications:

  1. Brand: Ready to sky
  2. Model:
  3. Current: 40A
  4. Burst Current(10sec):
  5. product: ESC (Electronic Speed Controller )
  6. BEC: None
  7. :
  8. : Timing(high/middle)
  9. Usage: RC Multi integrated circuit opted
  10. Size: 68x25x8.7mm
  11. Weight: 26g

Packages Includes:

1 x ReadytoSky 2-6S 40A OPTO ESC

This 4-in-1 35A 2-5S BLHELI_S ESC speed controller is presented as one of the budget options for ESC 4-in-1 speed controllers of this kind.


Features:

  1. Improved firmware using BLHeliS
  2. Ultra Lightweight, and compact size
  3. Adaptive timing, compatible with a wide range of motors and Kv
  4. Synchronous rectification technology adds efficiency, damped light

Package Includes:

1 x 35A 2-5S BLHELI_S 4 in 1 ESC

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

XSD12A

Supports Software

DShot300/DShot600

Firmware

BLheli_S

BEC

NO

MCU

Silabs EFM8BB21

Continuous Current (A)

12

Operating Voltage (VDC)

2-4s LiPo

Color

Black

Dimensions (mm) LxWxH

15.4 x 11.5 x 4

Weight (gm)

1.2

Model

Hobbywing Xrotor 40A

BEC

NO

Color

Black

Dimensions (mm) LxWxH

72 x 26 x 6

Weight (gm)

26

Continuous Current (A)

40

Operating Voltage (VDC)

2~6S lipo

Supports Software

Hobbywing Xrotor

Model

ReadytoSky 2-6S 40A

Current Rating (A)

40

Burst Current (A)

60

BEC

NO

No. of Cells

Lipo Cell 2-6S

Firmware

Hobbywing Xrotor 40A

Working current

35A

Input voltage

2-5S LiPo

BEC

no

Firmware

BLHeli_S

Firmware Target

JH-30 JH-25

Protocol support

ONESHOT125, ONESHOT42, MULTISHOT, DSHOT150, DSHOT300, DSHOT600

Mounting scheme

: 20 x 20mm, M2