These are Stainless steel Spacer Spring for 3D printer Heatbed balancing. The function of these 4 pcs springs is to level and cushion the Heatbed plate of 3D printers. Here we have added the assorted type of Heat bed Balancing Spring made of Stainless steel under the brand EasyMech. Explore the category and get the perfect matched spring for your application.

Giving consideration to the huge response to 3D printers and its parts from the maker’s community of INDIA, we are taking the responsibility of adding a diverse range of products under the 3D Printer Parts Category day-to-day.

Features:

1. Stainless Steel rust-free material
2. Usage: 3D Printer Head Bed Leveling

Package Includes:

1 x EasyMech 1 mm SS Heatbed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L 25mm – 4 Pcs

These are Stainless steel Spacer Spring for 3D printer Heatbed balancing. The function of these 4 pcs springs is to level and cushion the Heatbed plate of 3D printers. Here we have added the assorted type of Heat bed Balancing Spring made of Stainless steel under the brand EasyMech. Explore the category and get the perfect matched spring for your application.

Giving consideration to the huge response to 3D printers and its parts from the maker’s community of INDIA, we are taking the responsibility of adding a diverse range of products under the 3D Printer Parts Category day-to-day.

Features:

1. Stainless Steel rust-free material
2. Usage: 3D Printer Head Bed Leveling

Package Includes:

1 x EasyMech 1 mm SS Heatbed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L 40mm – 4 Pcs

This conversion kit is a brilliant design from MakerBase that takes the best parts of both stepper motors as well as servo motors, to create a closed-loop motor that not only offers the high speed and holding torque of a stepper but also the near-perfect positional accuracy of a servo as it continuously reads its own position after moving, before making on-the-fly adjustments so that the output steps match the input commands.

It simply converts a NEMA 17 (42 x 42mm) stepper motor into a strong and accurate servo that can handle relatively heavy objects such as DSLR cameras. This conversion module has been designed with the intent to make a loss-free stepper motor and uses a closed-loop system with a positional sensor for on-the-fly adjustments as it spins. This means that even when it does miss a step, this motor can easily spot that small mistake and rectify it accordingly before it goes too far.

Due to this functionality, the MKS SERVO42A can greatly increase print speeds up to 200m/s on some 3D Printers without having to modify any firmware, commit to any major hardware changes or jump through any other loops just to get it working.

This module can be used on any linear movement mechanism found in CNC router machines and 3D printers as well as slide tables, etc.

Specifications and Features:

1. Model: MKS SERVO42A V1.1
2. Motor Model: Nema 17
3. Shaft Size and Type: 5mm (d-type)
4. Position Cycle Frequency:5KHz
5. PID Adjustment Method: sPID, pPID, vPID (default set to sPID)
6. Processor Speed: 48MHz
7. USB Interface: Yes
8. Serial Port: Yes
9. OLED Display Interface: Yes, 400KHz I2C 4-Pin Header
10. Parameter Adjustment Method: Reset the module after re-adjustment
11. Current Adjustment Range: 0-3.3A (default set to 300mA)
12. Step Angle: 22.5° (Default) / 11.25° / 5.625° / 2.815° / 1.40625°
13. Step Precision: >0.1125°

Features:

1. All parts are installed and debugged well, easily operate.
2. High-speed printing does not lose step,
3. Easy to install and simple structure.
4. Available to configure through the serial port debugging assistant and multiple commands, and it can feedback the data.

Package Includes:

1 x MakerBase closed Loop Nema 17 SERVO42 Motor with Adapter for 3D Printers (Without Display)

The Makerbase 7 Inch TFT70 V1.1 Full-Color Screen for 3D Printers has a simple operation interface and firmware can be easily upgraded through an SD card. The user interface can be customized and can be switched online in 7 languages, preview Gcode model picture, suitable for building the DIY 3D printer or replacement for the display.

Note: This Display needs an external 12~24V DC Power Supply which does not come with this display. You have to arrange it separately

Features:

1.  Support online switching in 7 languages
2.  Support preview file model display, display model picture in print
3. 7.0 inch TFT touch screen, simple operation interface, high sensitivity
4.  Support WIFI function, through mobile phone APP control or computer web control, mobile phone APP support Android, IOS system, support in English and Chinese
5. Upgrade and configure firmware through SD card, the operation is simple and convenient
6.  Boot logo and all buttons and other interfaces can be designed on their own; can customize up to 13 instructions
7.  Support breakpoint continued to play function, power save function, broken material detection function, after the shutdown function
8.  Support Main firmware, smoothie ware firmware

Specifications:

1. Model: MKS TFT70 V1.1
2. Size: 196.7 * 111mm
3. Mounting Hole size: 185.7 * 100mm
4. Colour touch screen: 7.0-inch touch screen
5. Microprocessor: 32-bit STM32 processor
6. Update method: SD file update
7. Support storage system: SD card, U disk
8. Supported file formats: Gcode
9. Expandable modules: WIFI module, shutdown module after power off, material detection switch, continuous power off, external card slot.

Package Includes:

1 x Makerbase 7 Inch TFT70 V1.1 Full-Color Display

1 x 8-Pin Connecting Cable (50 cm)

These are Stainless steel Spacer Spring for 3D printer Heatbed balancing. The function of these 4 pcs springs is to level and cushion the Heatbed plate of 3D printers. Here we have added the assorted type of Heat bed Balancing Spring made of Stainless steel under the brand EasyMech. Explore the category and get the perfect matched spring for your application.

Giving consideration to the huge response to 3D printers and its parts from the maker’s community of INDIA, we are taking the responsibility of adding a diverse range of products under the 3D Printer Parts Category day-to-day.

Features:

1. Stainless Steel rust-free material
2. Usage: 3D Printer Head Bed Leveling

Package Includes:

1 x EasyMech 1 mm SS Heatbed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L 50mm – 4 Pcs

GT2560 is a compact board that is integrated with the mighty function of the Mega2560 + Ultimaker.
The GT2560 can not only take full place the Mega2560 + Ultimaker with respect to both software and hardware but has more premium features: the streamlined interfaces effectively avoid unnecessary troubles, well-regulated compaction of components highly integrated saves more space and easier to be mounted on most applications.
5 stepper motors, swappable driving modules, mighty ATmega2560 processor with 256k memory, 16MHz operating frequency, high-performance USB serial converter FT232RQ, all these make the GT2560 an ideal option for a 3D printer control board. What’s more, GT2560 can run over 12V and output 90W to a MOSFET, which gives higher torque and a higher rotation rate.

Features:

1. Integrated with the mighty function of the Mega2560 + Ultimaker and the Mega2560+ramps 1.4 kit, GT2560 can not only take full place them on respect of both software and hardware, but also features compact size, more convenient connection, and more stable.
2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.
3. The power pack: operating voltage is 12V-24V, double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V
4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse.
5. Three 12v fan output and one PWM output for LED or other lighting equipment.
6. Three 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.
7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial switch, eliminating jumper caps, easier to operate.
8. Three temperature sensor input (100k thermistor is recommended)
9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.
10. The firmware is the prevalent Marlin, which is known for its stability, usability, and high performance.

Package included:

1 x GT2560 Main board