EMAX New FPV ESC, Purple Bullet Series, Brand new bullet series purple, super-mini, ultra-light ESC; BLHeli-S firmware, support MULTISHOT, ONESHOT42 calibration protocol.

Emax Bullet Series 12A ESC (BLHELI_S) with Oneshot is the market lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware, hardware PWM generates a signal to boost smoother throttle response and reduce noise. Supports analogue signals: MULTISHOT, ONESHOT42

Features:

1. Brand new Bullet Series (purple), super-mini, ultra-light ESC.
2. New heatsink design both effectively reduces the core temperature and avoids propeller strike damage.
3. Imported MOS tube, Japanese ceramic capacitors, 3oz High-TG PCB board, significantly reduces electrical heat soak and improves system efficiency.
4. The market’s lightest and smallest ESC, designed specifically for high-level FPV racing.
5. Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.
6. Supports new digital signal: DSHOT, and analogue signals: MULTISHOT, ONESHOT42
7. Features high-temperature silicone signal cable for wire flexibility and ease of installation.

Package Includes:

1 x Emax Bullet Series 12A ESC (BLHELI_S)

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.

Features:

1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

This T-motor 200A 14S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 200A, and a peak current of up to 240A (10Sec).

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Continuous Current (A): 200
2. Peak Current (10sec): 240
3. BEC: N0
4. LIPO: 6-14s
5. Programmable: No

Package Includes:

1 x T motor Flame 200A 14S

UBEC stands for (universal battery eliminator circuit) or sometimes ultimate BEC. It’s used when ESC doesn’t have built-in BEC, or standalone power system is required. They generally are more efficient, more reliable and able to provide more current than BEC

A UBEC (universal battery eliminator circuit) is purely a device that converts high-voltage (such as 25V from a 6S LiPo) to lower voltages to allow the full UAS to be powered from one primary battery source.

It can be used in cars, ships, and underwater thrusters. No need to calibrate the throttle stroke, plug, and play. This product adopts imported components, a full power test. bidirectional  power output, no brake, direct reverse, quick response, and good handling.

Features:

1. Provide large output current
2. Overcurrent and overheat protection function
3. The max efficiency of the chip is up to
4. The small size and the light weight make it very convenient to use

Specifications:

1. Product: UBEC  (universal battery eliminator circuit)
2. Voltage: 5V
3. Current: 2A
4. Peak Current: 20A
5. Compatible battery: Li-po 2-4s
6. Weight: 24g
7. Dimensions: 5 x 2.5 mm

Packages Includes:

1 x Bidirectional 20A 2-4s UBEC 2A 5V

An ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky Simonk 30A ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky Simonk 30A ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
7. Ultra-low resistance MOSFET, strong flow capacity

Specifications:

1. Cont Current: 30A
2. Burst Current: 35A
3. BEC Model: Linear mode
4. BEC Output: 5V2A
5. Li-ion/Li0poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH
6. Connector: Banana Connector (Female)
7. Connector size: 3.5mm
8. Weight: 23g
9. Dimension: 6 x 3 x 1mm

Packages Includes:

1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)

Beautiful and fashionable Exquisite and unique design, easy to carry, beautiful, and practical. interesting decoration: Simple appearance, it can easily match various home decoration styles. Simple appearance can be matched with various styles of accessories, suitable for different occasions. suitable for bedrooms: Suitable for high accuracy game time, durable, and not easy to damage.

Features:

1. F4 NOXE V3 FC acro + 35A ESC  electronic stability control system
2. The newly developed  F4 NOXE V3 FC acro + 35A ESC  in 1 miniature electronic stability control
3. High system integration, greatly reduced than the standard size, excellent performance, support 5S,

Package Includes:

1 x F4 NOXE V3 FC acro + 35A ESC