Linear Actuator Stroke Length 100MM, 7mm/S, 1500N, 24V

SKU: 905295
Out of stock

3,480.00

Add to Wishlist
Add to Wishlist
  1. Permanent magnet DC motor drive: Voltage 24V DC
  2. Self Locking Force: 1500N
  3. Working temperature: -20ºC to +63ºC
  4. Aluminium frame and extension tube
  5. Compact Design
  6. Built in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  9. Long life: A service life of more than 50000 times.
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This Miniature Linear Actuator Stroke Length 100MM,7mm/S,1500N,24V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

Note:

1. Actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.  

   1. Direct connect with AC power
   2. Use in the above standard voltage environment
   3. Push/Pull exceed the maximum value of the product show
   4. The stroke did not finish, still with power, forced to cease.

3. The following conditions may shorten the product life.
   1. High-frequency operation
   2. High temperature

Linear Actuator Parts:

Following figure shows various parts of Linear Actuator. Also, please refer to the schematic provided in the attachments for dimensions of the actuator.

Linear Actuator Stroke Parts

Features:

  1. Aluminium frame and extension tube
  2. Compact Design
  3. Built in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 24VDC
  8. Self Locking Force: 1500N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Linear Actuator Stroke Length 100MM,7mm/S, 1500N, 24V

Additional information

Stroke Length

100mm(apprx. 4inches)

Operating Voltage (VDC)

24

Maximum current draw

≤2A

Operating temperature

-20ºC to +63ºC

Mounting hole diameter (both ends)

1/4” (6.4mm)

Protection Level

IP55

Maximum static load

337.2 lbs. ( 1500 Newtons )

Self Locking Force

1500N

Motor Diameter

36 mm

Speed at no load

0.28in/sec (7 mm /sec)

Speed at full load

0.22in/sec (5.5 mm /sec)

Noise level

45 dB

Length (mm)

22

Width (mm)

30

Height (mm)

75

Weight (gm)

892

Quick Comparison

SettingsLinear Actuator Stroke Length 100MM, 7mm/S, 1500N, 24V removeStroke Length DC12V 100MM 7MM/S 2000N Putter Electric Linear Actuator removeRefurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s removeLA-T8-100 Stroke Length 100MM 150MM/S 6.4N DC6V Electric Linear Actuator removeStroke Length DC12V 300MM 7MM/S 2000N Putter Electric Linear Actuator removeStroke Length DC12V 100MM 10MM/S 900N Putter Electric Linear Actuator remove
NameLinear Actuator Stroke Length 100MM, 7mm/S, 1500N, 24V removeStroke Length DC12V 100MM 7MM/S 2000N Putter Electric Linear Actuator removeRefurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s removeLA-T8-100 Stroke Length 100MM 150MM/S 6.4N DC6V Electric Linear Actuator removeStroke Length DC12V 300MM 7MM/S 2000N Putter Electric Linear Actuator removeStroke Length DC12V 100MM 10MM/S 900N Putter Electric Linear Actuator remove
Image
SKU90529513208031231752130807313208071320800
Rating
Price3,480.006,809.005,699.003,149.007,705.003,464.00
Stock
Out of stock
In Stock
Out of stock
In Stock
Out of stock
Out of stock
AvailabilityOut of stockIn StockOut of stockIn StockOut of stockOut of stock
Add to cart

Read more

Add to cart

Read more

Add to cart

Read more

Read more

Description
  1. Permanent magnet DC motor drive: Voltage 24V DC
  2. Self Locking Force: 1500N
  3. Working temperature: -20ºC to +63ºC
  4. Aluminium frame and extension tube
  5. Compact Design
  6. Built in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  9. Long life: A service life of more than 50000 times.
  1. Product: Electric Linear Actuator
  2. Stroke Length (mm): 100
  3. Operating Voltage: 12V DC
  4. Self Locking Force (N): 2000
  5. Product Weight: 1045g
  1. Permanent magnet DC motor drive: Voltage 12VDC
  2. Self Locking Force: 6000N
  3. Working temperature: -20ºC to +100ºC
  4. Aluminum frame and extension tube
  5. Compact Design
  6. Built-in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  1. Product: Linear Actuator
  2. Model: LA-T8
  3. Voltage: 6V
  4. Inner tube material: Aluminum alloy
  5. Weight: 87
  1. Product: Electric Linear Actuator
  2. Stroke Length (mm): 300
  3. Operating Voltage: 12V DC
  4. Self Locking Force (N): 2000
  5. Product Weight: 1210g
  1. Product: Electric Linear Actuator
  2. Stroke Length (mm): 100
  3. Operating Voltage: 12V DC
  4. Self Locking Force (N): 900
  5. Product Weight: 1045g
Content
This Miniature Linear Actuator Stroke Length 100MM,7mm/S,1500N,24V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

Note:

1. Actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.  

   1. Direct connect with AC power
   2. Use in the above standard voltage environment
   3. Push/Pull exceed the maximum value of the product show
   4. The stroke did not finish, still with power, forced to cease.

3. The following conditions may shorten the product life.
   1. High-frequency operation
   2. High temperature

Linear Actuator Parts:

Following figure shows various parts of Linear Actuator. Also, please refer to the schematic provided in the attachments for dimensions of the actuator.

Linear Actuator Stroke Parts

Features:

  1. Aluminium frame and extension tube
  2. Compact Design
  3. Built in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 24VDC
  8. Self Locking Force: 1500N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Linear Actuator Stroke Length 100MM,7mm/S, 1500N, 24V

This Miniature Linear Actuator Stroke Length 100MM 7MM/S 2000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 2000N, and stroke speed is up to 7mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Applications:

  1. Agricultural machinery
  2. Industrial electric lifting system

Note: The actual product may vary in terms of color and markings.


Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive

Specifications:

  1. Stroke Length (mm): 100
  2. Operating Voltage: 12V
  3. No Load Current (mA): 750
  4. Body Material: Aluminum Alloy
  5. Operating Temperature Range (C): -20 to 85
  6. Noise Level (dB): <40
  7. Cable Length (cm): 50
  8. Protection Standard: IP52
  9. Self Locking Force (N): 2000
  10. Speed at Full Load (mm/Sec): 7
  11. Speed at No Load (mm/Sec): 7

Packages Includes:

1 x Electric Linear Actuator

This is Refurbished Miniature Linear Actuator Stroke Length 500MM, 5mm/S, 6000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 6000N, and stroke speed is up to 5mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Note:

1. The actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.

    1. Direct connect with AC power
    2. Use in the above standard voltage environment
    3. Push/Pull exceed the maximum value of the product show
    4. The stroke did not finish, still with power, forced to cease.
3. The following conditions may shorten the product life.
    1. High-frequency operation
    2. High temperature

Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 12VDC
  8. Self Locking Force: 6000N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Refurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s.

 


What is a Refurbished Product?

We import products from a variety of suppliers both within and beyond the country, we inspect the quality and condition of the goods before stock-in. The goods which were determined to have any signs of broken boxes or scratches from shipment handling but totally functional get sorted out and offered with a refurbished prefix and same period of Robu warranty as a new product have, but at less price than the new one.

What should I expect to receive with the refurbished purchase and in what condition?

  1. All refurbished purchases will come with all original accessories provided by the manufacturer and a fully functional product.
  2. Refurbished products will be packaged in either original packaging or in a new and clean cardboard box.
  3. The product will be clean and may have a few visible signs of earlier testing/use or scratch marks of shipment handling.
  4. A refurbished product is also covered under ROBU warranties as same as a new product

Linear actuators work by moving an object or piece of equipment in a straight line, moving an object extremely accurately and repeatably if required. The primary reason for designing a linear actuator into a system is the need to move a payload in a linear fashion rather than a rotary one.


Features: 

  1. Max Load:235N
  2. Material: Metal
  3. Brand New product
  4. Lightweight
  5. highly precise
  6. Low power consumption

Specifications:

  1. Model: Type LA-T8
  2. Operating Voltage: 6V DC
  3. Max stroke: 100mm
  4. Speed: 150mm/s
  5. Operational Temperature: +5ºC ~ +50ºC
  6. Limit switch: Yes
  7. Housing material: Plastic
  8. Inner tube material: Aluminum alloy
  9. IP class: IP54

Packages Includes: 

1 x LA-T8-100 Stroke Length 100MM Electric Linear Actuator Putter for Doors /Windows

This Miniature Linear Actuator Stroke Length 300MM 7MM/S 2000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 2000N, and stroke speed is up to 7mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Applications:

  1. Agricultural machinery
  2. Industrial electric lifting system

Note: The actual product may vary in terms of color and markings.


Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive

Specifications:

  1. Stroke Length (mm): 300
  2. Operating Voltage: 12V
  3. No Load Current (mA): 750
  4. Body Material: Aluminum Alloy
  5. Operating Temperature Range (C): -20 to 85
  6. Noise Level (dB): <40
  7. Cable Length (cm): 50
  8. Protection Standard: IP52
  9. Self Locking Force (N): 2000
  10. Speed at Full Load (mm/Sec): 7
  11. Speed at No Load (mm/Sec): 7
  12. Weight: 1210g

Packages Includes:

1 x Electric Linear Actuator

This Miniature Linear Actuator Stroke Length 100MM 10MM/S 900N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 900N, and stroke speed is up to 10mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Applications:

  1. Agricultural machinery
  2. Industrial electric lifting system

Note: The actual product may vary in terms of color and markings.


Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive

Specifications:

  1. Stroke Length (mm): 100
  2. Operating Voltage: 12V
  3. No Load Current (mA): 750
  4. Body Material: Aluminum Alloy
  5. Operating Temperature Range (C): -20 to 85
  6. Noise Level (dB): <40
  7. Cable Length (cm): 50
  8. Protection Standard: IP52
  9. Self Locking Force (N): 900
  10. Speed at Full Load (mm/Sec): 10
  11. Speed at No Load (mm/Sec): 10

Packages Includes:

1 x Electric Linear Actuator

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Stroke Length

100mm(apprx. 4inches)

Operating Voltage (VDC)

24

Maximum current draw

≤2A

Operating temperature

-20ºC to +63ºC

Mounting hole diameter (both ends)

1/4” (6.4mm)

Protection Level

IP55

Maximum static load

337.2 lbs. ( 1500 Newtons )

Self Locking Force

1500N

Motor Diameter

36 mm

Speed at no load

0.28in/sec (7 mm /sec)

Speed at full load

0.22in/sec (5.5 mm /sec)

Noise level

45 dB

Length (mm)

22

Width (mm)

30

Height (mm)

75

Weight (gm)

892