Operating Voltage (VDC)

24
Maximum current draw

≤2A
Stroke Length

500mm(20inches)
Mounting hole diameter (both ends)

1/4” (6.4mm)
Protection Level

IP55
Maximum static load

337.2 lbs. ( 1500 Newtons )
Self Locking Force

1500N
Motor Diameter

39 mm
Speed at no load

7 mm /sec
Speed at full load

5.5 mm /sec
Noise level

45 dB
Weight (gm)

1479
Length (mm)

62
Width (mm)

40
Height (mm)

75

Linear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V

SKU: 905298
Out of stock

₹4,338.00

Add to Wishlist
Add to Wishlist
  1. Permanent magnet DC motor drive: Voltage 24VDC
  2. Self Locking Force: 1500N
  3. Working temperature: -20ºC to +63ºC
  4. Aluminium frame and extension tube
  5. Compact Design
  6. Built-in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  9. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:

Description

This Miniature Linear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

Note:

1. The actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.

    1. Direct connect with AC power
    2. Use in the above standard voltage environment
    3. Push/Pull exceed the maximum value of the product show
    4. The stroke did not finish, still with power, forced to cease.
3. The following conditions may shorten the product life.

    1. High-frequency operation
    2. High temperature

Linear Actuator Parts:

The following figure shows various parts of Linear Actuator. Also, please refer to the schematic provided in the attachments for dimensions of the actuator.

Linear Actuator Stroke Parts

Features:

  1. Aluminium frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 24VDC
  8. Self Locking Force: 1500N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Linear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V

Additional information

Operating Voltage (VDC)

24
Maximum current draw

≤2A
Stroke Length

500mm(20inches)
Mounting hole diameter (both ends)

1/4” (6.4mm)
Protection Level

IP55
Maximum static load

337.2 lbs. ( 1500 Newtons )
Self Locking Force

1500N
Motor Diameter

39 mm
Speed at no load

7 mm /sec
Speed at full load

5.5 mm /sec
Noise level

45 dB
Weight (gm)

1479
Length (mm)

62
Width (mm)

40
Height (mm)

75

Quick Comparison

SettingsLinear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V removeWaterproof Stroke Length DC24V 100MM 12MM/S 1100N Putter Electric Linear Actuator removeStroke Length DC12V 200MM 5MM/S 6000N Putter Electric Linear Actuator removeRefurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s remove24V 500MM Stroke Length Linear Actuator 6000N 5mm/s removeLA-T8-100 Stroke Length 100MM 150MM/S 6.4N DC6V Electric Linear Actuator remove
NameLinear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V removeWaterproof Stroke Length DC24V 100MM 12MM/S 1100N Putter Electric Linear Actuator removeStroke Length DC12V 200MM 5MM/S 6000N Putter Electric Linear Actuator removeRefurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s remove24V 500MM Stroke Length Linear Actuator 6000N 5mm/s removeLA-T8-100 Stroke Length 100MM 150MM/S 6.4N DC6V Electric Linear Actuator remove
Image
SKU90529813208141320804123175212178791308073
Rating
Price₹4,338.00₹5,196.00₹4,992.00₹5,699.00₹5,534.00₹3,149.00
Stock
Out of stock
Out of stock
In Stock
Out of stock
In Stock
In Stock
AvailabilityOut of stockOut of stockIn StockOut of stockIn StockIn Stock
Add to cart

Read more

Read more

Add to cart

Read more

Add to cart

Add to cart

Description
  1. Permanent magnet DC motor drive: Voltage 24VDC
  2. Self Locking Force: 1500N
  3. Working temperature: -20ºC to +63ºC
  4. Aluminium frame and extension tube
  5. Compact Design
  6. Built-in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  9. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  1. Product: Electric Linear Actuator
  2. Stroke Length (mm): 100
  3. Operating Voltage: 24V DC
  4. Self Locking Force (N): 1100
  5. Speed at Full Load (mm/Sec): 12
  1. Product: Electric Linear Actuator
  2. Stroke Length (mm): 200
  3. Operating Voltage: 12V DC
  4. Self Locking Force (N): 6000
  5. Weight: 2kg
  1. Permanent magnet DC motor drive: Voltage 12VDC
  2. Self Locking Force: 6000N
  3. Working temperature: -20ºC to +100ºC
  4. Aluminum frame and extension tube
  5. Compact Design
  6. Built-in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  1. Product: Linear Actuator
  2. Permanent magnet DC motor drive: Voltage 24VDC
  3. Self Locking Force: 6000N
  4. Stroke Length (mm): 500
  5. Working temperature: -20ºC to +100ºC
  1. Product: Linear Actuator
  2. Model: LA-T8
  3. Voltage: 6V
  4. Inner tube material: Aluminum alloy
  5. Weight: 87
Content
This Miniature Linear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

Note:

1. The actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.

    1. Direct connect with AC power
    2. Use in the above standard voltage environment
    3. Push/Pull exceed the maximum value of the product show
    4. The stroke did not finish, still with power, forced to cease.
3. The following conditions may shorten the product life.
    1. High-frequency operation
    2. High temperature
Linear Actuator Parts:

The following figure shows various parts of Linear Actuator. Also, please refer to the schematic provided in the attachments for dimensions of the actuator.

Linear Actuator Stroke Parts

Features:

  1. Aluminium frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 24VDC
  8. Self Locking Force: 1500N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Linear Actuator Stroke Length 500MM, 7mm/S, 1500N, 24V

Waterproof linear actuators are rated by international standards using the IP Code. Depending on the rating, a linear actuator can resist the ingress of dust and water and also ensure motion while fully submerged.
This Miniature Linear Actuator Stroke Length 100mm, 12mm/S, 1100N, 24V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push-rod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 1100N, and stroke speed is up to 12mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Applications:

  1. Agricultural machinery
  2. Industrial electric lifting system

Note: The actual product may vary from show in image

Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive

Specifications:

  1. Stroke Length (mm): 100
  2. Operating Voltage: 24V
  3. No Load Current (mA): 750
  4. Body Material: Aluminum Alloy
  5. Operating Temperature Range (C): -20 to 85
  6. Noise Level (dB): <40
  7. Protection Standard: IP52
  8. Self Locking Force (N): 1100
  9. Speed at Full Load (mm/Sec): 12
  10. Speed at No Load (mm/Sec): 12

Packages Includes:

1 x Electric Linear Actuator

This Miniature Linear Actuator Stroke Length 200mm, 5mm/S, 6000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push-rod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 6000N, and stroke speed is up to 5mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Applications:

  1. Agricultural machinery
  2. Industrial electric lifting system

Note: The actual product may vary in terms of color and markings.

Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive

Specifications:

  1. Stroke Length (mm): 200
  2. Operating Voltage: 12V
  3. No Load Current (mA): 750
  4. Body Material: Aluminum Alloy
  5. Operating Temperature Range (C): -20 to 85
  6. Noise Level (dB): <40
  7. Cable Length (cm): 50
  8. Mounting Hole Diameter (mm): 10
  9. Motor Diameter(mm): 65
  10. Protection Standard: IP52
  11. Self Locking Force (N): 6000
  12. Speed at Full Load (mm/Sec): 5
  13. Speed at No Load (mm/Sec): 7
  14. Weight: 2kg

Packages Includes:

1 x Electric Linear Actuator

This is Refurbished Miniature Linear Actuator Stroke Length 500MM, 5mm/S, 6000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the pushrod. It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, pushrod, sliding seat, shell, micro-motion control switch, etc.

With Reliable performance, sensitive action stable running. Good environment adaptability. High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 6000N, and stroke speed is up to 5mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery,

Note:

1. The actual product may vary in terms of colour and markings.

2. The following conditions can cause serious damage to the product.

    1. Direct connect with AC power
    2. Use in the above standard voltage environment
    3. Push/Pull exceed the maximum value of the product show
    4. The stroke did not finish, still with power, forced to cease.
3. The following conditions may shorten the product life.
    1. High-frequency operation
    2. High temperature

Features:

  1. Aluminum frame and extension tube
  2. Compact Design
  3. Built-in Limit Switch
  4. Low Noise
  5. Moisture-proof Surface
  6. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
  7. Permanent magnet DC motor drive: Voltage 12VDC
  8. Self Locking Force: 6000N
Applications:
  1. Autos, solar tracking system, agricultural machinery, the wedding system, industrial electric lifting system
  2. The medical electric bed, surgical bed, traction bed
  3. Electric equipment: Electric sofa, Electric lifting lever, Electric booth, electric sunroof, etc;
  4. Chair for medical use: Electric wheelchair, massage chair, dental chair.
  5. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.

Package Includes:

1 x Refurbished – 12V 500MM Stroke Length Linear Actuator 6000N 5mm/s.

 

What is a Refurbished Product?

We import products from a variety of suppliers both within and beyond the country, we inspect the quality and condition of the goods before stock-in. The goods which were determined to have any signs of broken boxes or scratches from shipment handling but totally functional get sorted out and offered with a refurbished prefix and same period of Robu warranty as a new product have, but at less price than the new one.

What should I expect to receive with the refurbished purchase and in what condition?

  1. All refurbished purchases will come with all original accessories provided by the manufacturer and a fully functional product.
  2. Refurbished products will be packaged in either original packaging or in a new and clean cardboard box.
  3. The product will be clean and may have a few visible signs of earlier testing/use or scratch marks of shipment handling.
  4. A refurbished product is also covered under ROBU warranties as same as a new product
This Miniature Linear Actuator Stroke Length 500MM, 5mm/S, 6000N, 12V is an electric push rod and an ideal solution for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. This electric push rod is a kind of electric driving device which transforms the rotary motion of the motor into the linear reciprocating motion of the push-rod.
It can be used in various simple or complex processes as executive machinery to realize remote control, centralized control or automatic control. The electric push rod is composed of the drive motor, reduction gear, screw, nut, guide sleeve, push-rod, sliding seat, shell, micro-motion control switch, etc. With Reliable performance, sensitive action stable running. Good environment adaptability. 
High-quality metal material, high-performance motor, built-in stroke switch. Maximum push/pull is up to 6000N, and stroke speed is up to 5mm/s when under no-load. These are commonly used in automotive, medical devices and engineering industry, agricultural machinery
Applications:
  1. Industrial
  2. Agricultural machinery
  3. Construction
  4. Clean sweeping vehicles
  5. Vessels
  6. cargo

Features:

  1. Permanent magnet DC motor drive: Voltage 24VDC
  2. Self Locking Force: 6000N
  3. Working temperature: -20ºC to +100ºC
  4. Aluminium frame and extension tube
  5. Compact Design
  6. Built-in Limit Switch
  7. Low Noise
  8. Moisture-proof Surface
  9. Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.

Specifications:

  1. Stroke Length (mm): 500
  2. Operating Voltage (VDC): 24
  3. Body Material: Aluminum Alloy
  4. Operating Temperature Range (°C): -20 to 85
  5. Trip: 5MM/S
  6. Duty Cycle 2 min on/18min OFF
  7. Self Locking Force: 6000N

Package Include:

1 X 24V 500MM Stroke Length Linear Actuator 6000N 5mm/s

Linear actuators work by moving an object or piece of equipment in a straight line, moving an object extremely accurately and repeatably if required. The primary reason for designing a linear actuator into a system is the need to move a payload in a linear fashion rather than a rotary one.

Features: 

  1. Max Load:235N
  2. Material: Metal
  3. Brand New product
  4. Lightweight
  5. highly precise
  6. Low power consumption

Specifications:

  1. Model: Type LA-T8
  2. Operating Voltage: 6V DC
  3. Max stroke: 100mm
  4. Speed: 150mm/s
  5. Operational Temperature: +5ºC ~ +50ºC
  6. Limit switch: Yes
  7. Housing material: Plastic
  8. Inner tube material: Aluminum alloy
  9. IP class: IP54

Packages Includes: 

1 x LA-T8-100 Stroke Length 100MM Electric Linear Actuator Putter for Doors /Windows

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Operating Voltage (VDC)

24
Maximum current draw

≤2A
Stroke Length

500mm(20inches)
Mounting hole diameter (both ends)

1/4” (6.4mm)
Protection Level

IP55
Maximum static load

337.2 lbs. ( 1500 Newtons )
Self Locking Force

1500N
Motor Diameter

39 mm
Speed at no load

7 mm /sec
Speed at full load

5.5 mm /sec
Noise level

45 dB
Weight (gm)

1479
Length (mm)

62
Width (mm)

40
Height (mm)

75