This is the Micro HDMI to AV Analog Signal Converter With Shutter is Design for Aerial Photography and special needs of Weight and Volume. Straight to Micro HDMI ports, compatible with most equipment with Micro HDMI standard interface. Direct power supply for the camera without external electric direct connection to the transmitter without HDMI line.

This Circuit comes with shutter control. Which can control the photo screening speed. It Supports the mainland version of most of the Cameras. Also, it Could control photography or recording by transmitter switch.

Features:

1. Micro HDMI Input.
2. It includes IR remote control shutter.
3. Could control photography or recording by transmitter switch.

Package Include:

1 x  Micro HDMI to AV Analog Signal Converter Module.
1 x 3-core AV wire.
1 x 0.75 POF optical fiber.

Industrial USB TO RS485 Bidirectional Converter, Onboard Original CH343G, Multi-Protection Circuits And SP485EEN Chips, Providing Better Stability And Compatibility, Built-In Lightningproof Tube, Resettable Fuse, ESD And TVS Protection Circuits, Etc.

The USB Signal Can Be Converted Into A Balanced Differential RS485 Signal And The Transmission Rate Is Stable. The Reliable Speed Is 300bps ~ 3Mbps, The Transmission Distance Is About 1.2km For RS485 And About 5 Meters For USB.CH343G is a USB bus adapter chip, which can convert USB to a high-speed asynchronous serial port, supports automatic identification and dynamic self-adaptation of communication baud rate of 115200bps and below, and provides commonly-used MODEM contact signals to expand asynchronous serial ports for computers. It can upgrade a common serial device or MCU directly to a USB bus.

Features:

1. Support USB to RS485 bidirectional conversion
2. Fast communication, stable and reliable, better compatibility
3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning proof & anti-electrostatic
4. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
5. 3 LEDs for indicating the power and transceiver status

Package Includes:

1 x USB TO RS485 (B)

1 x USB-A male to female cable

1 x Screwdriver

USB To RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL And SP485EEN, Multiple Protection, Wall-Mount And Rail-Mount Support

Features:

1. Onboard Original FT232RL and SP485EEN chip. Fast communication, stable and reliable, better compatibility
2. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
3. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
5. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
6. Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection
7. Onboard 120R terminal resistor on the RS485/RS422 ports, enable by default, configurable by jumper
8. 3 LEDs for indicating the power and transceiver status
9. Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective

Specifications:

1. Baud Rate: FT232RNL 300bps ~ 3Mbps
2. Host Port: USB
3. Device Port: RS485/422
4. Operating voltage: 5V
5. Protection: 200mA self-recovery fuse, ESD protection
6. Transmission distance: About 5m
7. Connector: Screw terminal
8. Pins: A+, B-, PE
9. Direction control: Hardware automatic control
10. Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor)
11. Transmission distance: About 1.2km(low rate)
12. Transmission mode: Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
13. PWR: Red power indicator, light up when there is USB connection and voltage is detected
14. TXD: Green TX indicator, light up when the USB port sends data
15. RXD: Blue RX indicator, light up when the device ports send data back

Package Includes:

1 x Waveshare USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection

The W5100 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.

W5100 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5100 uses a 16ytes internal buffer as its data communication memory.

Note: for more technical details go through Datasheet in the attachment section

Features & Specifications

1. Hardwired TCP/IP protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
2. Un-attackable hardware network engine for preventing network attacks such as flooding, spoofing, injection
3. Host Interface : Direct/Indirect Bus & Serial Peripheral Interface (SPI MODE 0, 3)
4. 4 Independent hardware socket
5. Internal 16Kbytes memory for TCP/IP packet processing
6. 10BaseT / 100Base TX Ethernet PHY Embedded
7. Support Auto-Negotiation (Full & Half Duplex, 10 & 100 Based)
8. Support Auto-MDIX
9. 3.3V Operation with 5V I/O signal tolerance
10. LED outputs (TX, RX, full/half duplex, Collision, link, speed

Package Includes:

1 x WIZnet W5100

Industrial Serial Server, RS232 To RJ45 Ethernet, TCP/IP To Serial, Rail-Mount Support, With POE Function(Optional)

Features: 

1.  It combines multi functions in one  including serial server, Modbus gateway, MQTT gateway, RS232 to JSON, etc
2. The module features RS232 and Ethernet port(POE function is optional)
3. The rail-mount case design, small in size, easy to install
4. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring

Specifications:

1. Product Type: Serial server, Modbus Gateway, MQTT Gateway
2. Basic Function: Bi-directional transparent data transmission between RS232 and Ethernet
3. Communication interface: RS232 port x 1, Ethernet port x 1
4. Power supply: 6 ~ 36V DC screw terminal 6 ~ 36V DC screw terminal, or PoE port
5. Isolation Protection: Power isolation, Signal isolationEthernet common network port PoE network port, support IEEE 802.3af standard
6. 10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection
7. Serial port: Isolated RS232
8. Baudrate 300 ~ 115200 bps
9. Parity bit none, odd, even, mark, space
10. Data bit: 5 ~ 9 bits
11. Flow control: N/A
12. Protocol: ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
13. Configuration: host, web browser, device management functions library
14. Communication method: TCP/IP direct communication, VCOM
15. Operating mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP multicast

Package Includes:

1 x Waveshare Industrial serial server, RS232 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, with POE function

RP2040-One is a mini RP2040 development board. The onboard PCB USB-A connector makes it plug-and-play instantly. Mini body, 29 x multi-function GPIO pins (20 x via edge pin-out, others via solder points), and the edge of the PCB adopt the castellated design, which can be easily and quickly integrated into your project

Dimensions:

Features:

1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133MHZ
3. The castellated module allows soldering direct to carrier boards
4. USB1.1 with device and host support
5. Low-power sleep and dormant modes
6. Drag-and-drop programming using mass storage over USB
7. Accurate clock and timer on-chip
8. Temperature sensor
9. Accelerated floating-point libraries on-chip

Specifications:

1. Model: RP2040-One
2. On-board Flash memory: 246KB of SRAM, and 4MB
3. 2 x SPI, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels
4. GPIO pins: 29 x multi-function (20x via edge pinout, others via solder points)
5. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Packages Includes:

1 x Waveshare RP2040-One, 4MB Flash MCU Board Based On Raspberry Pi RP2040