This Mini MD90 90mm Racing Drone with Mini Flytower F3, Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

It is a pack of Mini F3 or F4 flytower Flight controllers with a 5.8G 25mW Transmitter, 600TVL 170 degree color video mini camera with mic audio, 1104 7500kv motor, and MD90 Frame Kit with 2030 red propeller.

Note: This product doesn’t come with a transmitter and receiver you have to purchase it separately.

Features:

1. 600TVL 170 degrees color video mini camera with mic audio
2. 48 wireless channels transmitter
3. 7500KV Brushless Motor
4. Micro size and lightweight
5. Easy installation for racing drone

Specifications:

Transmitter:

1. Support video format: PAL
2. Output Impedance: 50 Ohm
3. Output signal strength: 13±1dbmdBm
4. Output Power: 25mW
5. Wireless Channel: 48CH
6. Operating voltage: 5v
7. Current: 100mA
8. Frequency : 5 BAND 48CH 5645 ~ 5945 MHz

600TVL Camera:

1. Horizontal Resolution : 600TVL
2. Minimum illumination: 0LUX(LED ON)
3. S/N ratio ≥48dB
4. Gama:0.45
5. Frame speed: 50f/s(PAL)
6. White balance: Auto
7. Audio out: Monophonic
8. Video out: 1.2Vp-p 75Ω CVBS
9. Image color: Color
10. TV format: PAL
11. Lens: 1.8mm Wide view angle 170 Degree
12. IR Distance:1-3 Meters
13. Working temperature: -10~+50Degree C
14. Input power : 5V(Module)/DC9-12V(With step-down AV cable)
15. Power consumption :120mA

Mini 1104 7500KV Brushless Motor:

1. KV: 7500KV
2. Motor size: diameter 14*12.5
3. Stator Diameter: 14mm
4. Stator Length: 12.5mm
5. Shaft Diameter: 1.5mm
6. Motor Dimensions(Dia*Len): diameter 14*12.5mm
7. No.of Cells(Lipo): 2-3S
8. Max Continuous Current(A): 3.5A
9. Max Continuous Power(W): 38.9W

MD90 frame:

1. Wheel Base: 90mm
2. Weight: about 19g
3. Upper Board Thickness: 1.5 mm
4. Bottom board Thickness: 2mm

Package Includes:

Build your small indoor DIY done with this QX95 Quad-copter Combo Kit. This is QX95 Brushed Quad-copter Combo Kit will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles, and began soldering. This kit has very good products and is available at an affordable cost.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

We’ve heard from a lot of people who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose of providing a Brushed Quad-copter Combo Kit needed to build a quadcopter. Here’s what the kit contains

QX95 Brushed Quad-copter Frame

Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This QX95 Brushed Quad-copter Frame is a well thought out brushed quad frame built from quality materials.

More information about QX95 Brushed Quad-copter Frame is available at Robu.in.

55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter

These are 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter. The propellers with a 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors.

More information about 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter is available on Robu. in

8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

If you are new in the multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotor!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.

More Information about 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW is available on Robu.in

Package Includes:

1 x QX95 Brushed Quad-copter Frame
1 x Radiolink Flight Control
4 x 55mm (2.2inch) Blade Propeller Propeller Quadcopter
1 x 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

The Mark4  5Inch 225mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 225mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 5 inch 225mm carbon fiber frame kit

The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 145mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Compact size
2. High performance
3. Lightweight and Durable.
4. Made by super strong and advanced engineering material.
5. The frame has excellent strength.
6. Equips vibration-free mounting bracket for FPV camera.
7. This is DIY drone Frame Kit for your projects

Specifications:

1. Wheelbase: 145mm
2. Weight: 50G
3. Material: Carbon Fiber
4. Thickness: upper plate 2.0mm, side plate 2.0mm, bottom plate 2.0mm, splint 2.0mm, machine arm 4.0mm
5. Paddle: 3.0 inch paddle
6. Flight control hole distance: 20 x 20mm (M2)
7. The distance between the rear image transmission holes: 20*20mm (M2)
8. Camera installation width: 14mm
9. Motor mounting holes: 9 x 9mm(M2), 12 x 12mm(M2)
10. Adapt to the VISTA sky terminal
11. Adapt 915 antenna

Packages Includes:

1 x Mark’3 145mm Carbon Fiber Frame Kit

The Assassin 5 inch 222mm Drone Racing frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 222mm. It features a very large area on the mainframe for mounting cameras and other accessories. 

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Assassin 5 inch 222mm Drone Racing frame Kit

Kit Includes:

1 x Assassin 5 inch 222mm Drone Racing frame and Accessories

1 x black zip ties(10 pcs)

The Mark4  7Inch 295mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 295mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 7inch 295mm Carbon Fiber Frame Kit