The Nextion IO Adapter is made specially to work with Nextion Enhanced HMI Display Series – for use with any of the 2.4″, 2.8″, 3.2″, 3.5″, 4.3″, 5.0″, 7.0″ enhanced models.

This small board breaks out the enhanced Nextion’s GPIOs to 0.1 inches/2.54 mm headers, allowing users to conveniently connect external devices to Nextion’s Digital/PWM GPIOs.

Package Includes:

1 x Nextion IO Adapter

Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with an enclosure that comes with a Capacitive touch display. This display is from the Newly launched Intelligent series and is very easy to use and can be interfaced to the Microcontroller using a simple UART port. The Nextion display can be easily interfaced with any Microcontroller using just 2 wires. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background. The Nextion display then communicates with your microcontroller using serial communication at a 9600 baud rate.

NX8048P050_011C_Y is a 5.0″ Nextion Capacitive touchscreen display with an enclosure that comes with a Capacitive touch display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and you won’t believe it will work even with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.

Note: The small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.

Features:

1. 5.0” LCD-TFT HMI display module
2. RGB 65K true-to-life colors
3. Capacitive touch panel
4. 300 nit Brightness
5. Onboard 200MHz MCU
6. 512 KB of SRAM
7. 128 MB of Flash memory
8. 1024 Byte EEPROM

Package Includes:

1 x Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with enclosure

NX8048P050-011R is a 5.0″ Nextion Display with a Resistive touchscreen display. This display is from the Newly launched Intelligent series and is very easy to use and can be interfaced to the Microcontroller using a simple UART port. The Nextion display can be easily interfaced with any Microcontroller using just 2 wires.

Nextion NX8048P050-011R is a 5.0″ Intelligent series SMART HMI Touch display having a resistive touch screen. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background. The Nextion display then communicates with your microcontroller using serial communication at a 9600 baud rate.

The Nextion Intelligent NX8048P050-011R 5.0″ Resistive Touchscreen Display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and you won’t believe it will work even with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.

Note: The small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.

Features:

1. 5” LCD-TFT HMI display module
2. 840 x 480 screen resolution
3. RGB 65K true-to-life colors
4. Resistive touch panel
5. 300 nit Brightness
6. Onboard 200MHz MCU
7. 512 KB of SRAM
8. 128 MB of Flash memory
9. 1024 Byte EEPROM

Package Includes:

1 x Nextion Intelligent NX8048P050_011R 5.0″ HMI Resistive Touch Display

2.8inch inch Smart HMI (Human Machine Interface) LCD module with Resistive touch screen. This LCD module allows the user to design a rich GUI based interactive system on the LCD. It has an audible ton indication s the user interacts with the module. This type of smart LCD can be used in a variety of machines such as vending machines etc where an end-user needs to interact with the machine.

Any microcontroller can serially communicate with this module to send or receive the data. Standard UART based serial communication interface allows the same. Special GUI and functionality design software is available for the design of the interaction flow on the smart LCD. Flexible approach to communicating with the LCD module open a lot of applications possibility. A variety of HMI utilities can be achieved using this fast response, Resistive touch smart HMI display module.

Features: 

1. Size: 2.8″
2. Touch Type: Resistive
3. Resolution: 320×240
4. Grade: Commercial
5. Colour: 65K
6. Backlight: LED
7. Brightness: 300 nit
8. Operating Voltage: 5 Volts
9. Working Temperature: -20 to 70°C

Package Includes :

1 x DWIN HMI 2.8 Inch TN LCD Resistive Touch Display

Capacitive touch screen technology USES the human body’s current induction to work. The capacitive touch screen is a four-layer composite glass screen. The inner surface of the glass screen and the interlayer are coated with one layer of ITO respectively, This conductive material responds when contacted by another electrical conductor, like your bare finger. When you touch your screen, an electric circuit is completed at the point where your finger makes contact, changing the electrical charge at this location.

Most mobile phones have both types of screens. A capacitive touchscreen is a type of touchscreen that is as transparent as glass and does not display any content or glow, it is used to sense the user’s touch actions. The TFT screen is the real screen. This is a10.1 Inch Capacitive Touch Screen LCD from waveshare, with a resolution of 1024×600 and a capacitive touch panel, which supports Raspberry Pi, Jetson Nano, Windows, and Game consoles and can also be used as a computer monitor. This product supports Windows 10 / 8.1 / 8 / 7, Raspbian / Ubuntu / Kali / Retropie, and WIN10 IoT systems single-point touch.

Applications:

1. Industrial Control
2. Charging Pile
3. Smart Home
4. Medical
5. Internet of Things
6. Robot,
7. Vehicle-mounted instruments,
8. Vending instruments
9. Intelligent CNC, cosmetic instruments

Features:

1. Hardware resolution: 1024 × 600.
2. Toughened glass panel features 6H hardness and 10-Points capacitive touch.
3. Fully Laminated for better touching.
4. When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie.
5. When used as a computer monitor, it supports Windows 11/10/8.1/8/7.
6. Features 3.5mm Headphone jack and 4PIN audio interface for HDMI audio.
7. Supports common game consoles like XBOX360 and Switch.
8. Backlight is controllable for power saving.

Specification:

1. Model: Waveshare 10.1inch Capacitive Touch Screen LCD (E), 1024×600, HDMI, IPS
2. LCD Type:HDMI, IPS
3. Interface: RGB
4. Touch Controller: GT7385
5. Touch Panel Type: Capacitive (10-point touch)
6. Backlight: LED
7. Display Size: (mm) 223.00 × 125.28
8. Dot Pitch (mm): 0.2175 × 0.2088
9. Aspect Ratio: 16:9
10. Resolution: 1024 × 600 (Pixel)
11. Power Consumption: TBD
12. Backlight Current: TBD
13. Operating Temperatur:e 0 ~ 70℃

Packages Includes:

1 x Waveshare 10.1inch Capacitive Touch Screen LCD (E), 1024×600, HDMI, IPS, Optical Bonding Screen, Supports Raspberry Pi, Jetson Nano, And PC

This DWIN 5 inch SMART Screen is quite useful and is full features load SMART screen. It is called SMART screen because it comes with UI development Software from the manufacturer which gives users great and useful tools to develop their own UI with great features. One can design UI Suh as a button, slider, Graph, Text Display, etc on their own.

User can Develop their own UI Using the software provided and pre-installed for it called TA / DGUS II ( DGUS II pre-installed) . Also, it is supported with RGB colour and 16.7M colours. It is also equipped with 250nitnit brightness which makes it visible in daylight too.

It is compatible with All micro-controller Boards. which can be interface with I2C communications.

Features: 

1. Built-in DGUS II intelligent software
2. Integrated smart screen
3. Powerful data management
4. Operating Voltages:5V typical.(MIN:4.5V,MAX:5.5V)
5. Dimensions:143.5(W) × 80.9(H) × 15.8(T) mm
6. 16.7M colours
7. Capacitance touch screen, Buzzer

Display:

1. Size -5″
2. Display Format -480×800 Pixel Matrix
3. Brightness -250nit
4. Active Area – 108.0mm (W) ×64.8mm (H)
5. Colour – 24-bit colour 8R8G8B
6. Backlight – LED

Interface:

• UART4: Mode is determined by Jumper used after OS configuration )
  ON=N81/E81/O81/N82, 3.3V&5V TTL/COMS ;
  OFF=N81/E81/O81/N82, RS232.

Package Includes :

1 x DWIN HMI 5 Inch IPS LCD Resistive Touch Display