NRF24L01 Wireless Data Transmission module (Green) 10pin

Specifications and Features:

1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
2. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode
5. Built-in 2.4Ghz antenna
6. Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
7. Built-in voltage regulator
8. Standard DIP Pitch Interface for embedded applications
9. size: 34mm X 17mm X 1mm

Package Includes:

1 x NRF24L01 Wireless Data Transmission module (Green) 10pin

The RFM69HW is a transceiver module capable of operation over a wide frequency range, including the
315,433,868 and 915MHz license-free ISM (Industry Scientific and Medical) frequency bands. All major RF communication parameters are programmable and most of them can be dynamically set. The RFM69HW offers the unique advantage of programmable narrow-band and wide- band communication modes. The RFM69HW is optimized for low power consumption while offering high RF output power and channelized operation. Compliance ETSI and FCC regulations. In order to better use RFM69HW modules, this specification also involves a large number of the parameters and functions of its core chip RF69H’s,including those IC pins which are not leaded out. All of these can help customers gain a better understanding of the performance of RFM69HW modules, and enhance the application skills

Applications:

1. Automated Meter Reading.
2. Wireless Sensor Networks.
3. Home and Building Automation.
4. Wireless Alarm and Security Systems.
5. Industrial Monitoring and Control.
6. Wireless M-BUS.

Features:

1. High Selectivity: 16-tap FIR Channel Filter.
2. Constant RF performance over voltage range of module.
3. Fully integrated synthesizer with a resolution: 61 Hz,
4. FSK, GFSK, MSK, GMSK and OOK modulations.
5. Built-in Bit Synchronizer performing Clock Recovery.
6. Incoming Sync Word Recognition.
7. Automatic RF Sense with ultra-fast AFC.
8. Packet engine with: CRC-16, AES-128, 66-byte FIFO.
9. Built-in temperature sensor.

Specifications:

1. High Sensitivity: down: -120 dBm at 1.2 kbps.
2. Dynamic Range RSSI: 115 dB+.
3. FSK Bit rates:  300 kb/s.
4. Low current: Rx: 16 mA.
5. register retention: 100nA.
6. Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm,80.
7. Programmable Pout: -18 to +20 dBm in 1dB.
8. Operational temperature range: -20 to +70 °c.
9. Load capacitance on digital ports: 25 pf.
10. Supply voltage: (1.8V-2.4V 17dBm, 2.4V- 3.6V 20dBm)

Package Includes:

1 x RF module RFM69HW-915S2.

The RFM63W is a low cost transceiver module operating in the 868 and 915MHz frequency bands,
The RFM63W is optimized for very low power consumption (3mA in receiver mode). It incorporates a
baseband modem with data rates up to 200 kb/s. Data handling features include a sixty-four byte FIFO,
packet handling, automatic CRC generation and data whitening. All major RF communication parameters are programmable and most of them may be dynamically set. It complies with European (ETSI EN 300-220 V2.1.1) and North American (FCC part 15.247 and 15.249) regulatory standards.

Applications:

1. Wireless alarm and security systems
2. Wireless sensor networks
3. Automated Meter Reading
4. Home and building automation
5. Industrial monitoring and control
6. Remote Wireless Control

Features:

1. Low Rx power consumption: 3mA.
2. Low Tx power consumption: 25 mA @ +10 dBm.
3. Good reception sensitivity: down to -105 dBm at.
4. Programmable RF output power:  +12 dBm in 8 steps.
5. Packet handling feature with data whitening and automatic CRC generation.
6. Wide RSSI (Received Signal Strength Indicator).
7. dynamic range: 70dB from Rx noise floor.
8. Bit rates: 200 kb/s, NRZ coding.
9. On-chip frequency synthesizer.
10. FSK and OOK modulation.
11. Incoming sync word recognition.
12. Built-in Bit-Synchronizer for incoming data and.
13. clock synchronization and recovery.
14. Module Size: 19.7X16mm.
15. Optimized Circuit Configuration for Low-cost.

Specification:

1. Operating Supply Voltage: 2.1V.
2. Max. Operating Voltage: 3.6 V.
3. Min. Operating Temperature:  -40c.
4. Max. Operating Temperature: +85 °C
5. Input Level:  0 dBm.
6. carrier frequency: 868MHz or 915MHz.
7. , VDD: 3.3 V.
8. : Temp: 25 °C.

Package Includes:

1 x RF module RFM63W-868MHz.

This is a Kl600-3 433 Mhz 3-Button RF Remote Control(Without Battery). The remote Designed for universal medium-range remote control applications. Come with various different button quantity options. The whole enclosure is made of ABS with a scrub surface and feels good. The transmitter is highly configurable with a frequency of 433 MHz. It supports the individuation logo and button symbol.

Applications:

Widely used in automobiles, vehicle door locks, anti-theft alarms, security systems, home security systems, home electric control, wireless toys, short-to-medium distance wireless remote control products, industrial automation, etc.

Features and Specifications:

1. Operating Voltage: DC12V
2. Battery:23A 12V
3. Model No: KL600-3
4. Voltage:12V
5. Material: Plastic
6. Frequency:433MHz
7. Current:30 mA
8. Encoding Type: Fixed, Learning Code
9. Modulation Way: Ask/Ook

Package Includes:

1 x Kl600-3 433MHz 3-Button RF Remote Control

IR Remote Control Extension Cord Cable IR Receiver Transmitter Repeater

Hey DYI HACKER Do you want to hide your set-top box or bulky sound system behind or beneath the Screen? Or you want to operate it from the other place at home where your Receiver Box is not in reach to catch the Remote signal? This IR repeater/Extender Infrared Extender Cable is the perfect solution for controlling and help in that. You just need to plug and Play this powerful IR repeater system and sit back on your couch to enjoy and operate your device fast and smoothly hiding them to your desired place.

Installation Steps:

1. It Comes with One Receiver (big red dome) at one end and one small Transmitter (small dome) at another end.
2. Both ends are attached with a USB cable for 5V 500mA DC Input Power.
3. You just need to find one USB port on your device to power it up or a wall adapter in the rare case.
4. Place the Transmitter (small dome) nearby or stick it at the IR receiver LED on your box/device
5. Place the Receiver (big dome) at the line of sight of the remote control where you have easy access to throw your remote signals comfortably.
6. And that’s it you are all set to access your hidden appliance via this IR repeater.
7. Hack: You can control two IR-operated devices using this (like DTH and Blue Ray Player) *condition will be both box’s  IR receiver should be close enough that transmitter of this Repeater system can be set between within 5 cm range of both device’s IR Receiver LED. (really this is pro-level)

Specifications and Features:

1. Operating power: 5VDC 500mA
2. Cable Lenght: 200 cm (2 Meter)
3. Cable color: Black
4. Weight: 40gm
5. Can be used to enhance the range of Device

Package Includes:

1 x IR Remote Control Extension Cord Cable IR Receiver Transmitter Repeater

433 MHz RF receiver module is the most common and cheapest RF receiver for commercial use. This module helps to receiver the 433MHz frequency commonly but it also has a node on it that is changeable by users for different frequencies. The variable node can adjust the frequency from 315MHz to 433MHz.

The module can receive the data but it is unable to decode and view the data from the receiver without using any third device. Most of the time smart boards and microcontrollers interface with the receiver. The output of the module comes in an encoded form that is decodable through programming and encoders. On the other hand, it works well with the 433 MHz RF transmitter module.

Applications:

1. Home automation
2. Transmit Serial data for a short distance
3. Car security system
4. Wireless logging
5. Short distance communication

Features:

1. The Transmitter offers one-way communication through 433.92MHz frequency at a 1Kb data rate
2. It operates at 3-12V which is the power operating volts of most of the microcontrollers and boards.
3. The module uses the ASK modulation method to transmits the data.
4. It is one of the low-cost power effective modules for both commercial and developers.
5. 433MHz Transmitter is one of the oldest RF transmitters and it has a lot of applications and examples on the internet which helps to achieve interfacing with almost every application.

Package Includes:

1 x 433MHz RF Receiver Module Kl-Cw11