This is an NX4 EVO Flight Controller. This Flight Controller Four-level flight modes are Beginner, Practice, Intermediate, Experts. This Flight Controller Supports a single aileron, dual ailerons, triangles, and V-tail. The input Voltage of This Flight Controller is about 5-6 volts and This Controller can be connected to ESC’s with BEC.

Features:

1. Humanized design, and Easy to use.
2. Micro design and small size made it unique.
3.  Three-mode switched from the controller.

Package Includes:

1 x NX4 EVO Flight Controller

JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Flight Controller ARCO  was designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU

A flight controller (FC) is a small circuit board of varying complexity. Its function is to direct the RPM of each motor in response to input. A command from the pilot for the multi-rotor to move forward is fed into the flight controller, which determines how to manipulate the motors accordingly.

Every part of the drone is controlled by a flight controller. It moves the drone by changing the RPM of the motors. It is a control system that takes input from the sensors and makes the drone fly accordingly. This is a small computer board with various sensors which understand the movement of the craft. It has sensors like Gyroscope, Accelerometer, Barometer, and Magnetometer. According to the signal comes from the transceiver , it controls the motors and craft.

The board is rock solid and gives great performance with the HAKRC 20 A ESC, except that you have to switch the motors 1 & 2 to get the motor connections right. The barometer does not work great. Even though I packed a sponge above it, it starts bouncing hard when I switch on ALT hold mode. The OSD is the best and it works flawlessly, as does the VCC feed, whcih gives you the actual battery voltage reading through betalight. Else all great, good light and powerful board for a micro build.

Connection Diagram: 

Board Difference: 

Features:

1. Compact In size
2. Color: black
3. Easy to install
4. High performance flight controller module
5. very use to product

Specifications: 

1. Brand (trade name): JHEMCU
2. Model: F4 NOXE V3
3. Main control (MCU): STM32F411CEU6/100 MHz
4. Sensor: BMI 270/Gyro/Accel
5. Video Overlay (OSD): AT7456E
6. Barometer (Baro): Yes (Deluxe version only)
7. Black Box (Black Box): 16MB (Deluxe Edition only)
8. Input voltage: Input voltage: 2S-6S (7.4V-26V)
9. 5V-BEC: 5V/2.5A ± 0.1V
10. 10V-BEC: 10V/2A+0.1V
11. Receivers (receivers): ELRs (CRSF), TBS (CRSF), SBU, IBU, DS M2, DS MX
12. HD interface: yes
13. UART: UART 1, UART 2
14. LIC: IIC1
15. LED strip: yes
16. Buzzer (buzzer): support 5V active
17. ESC signal (ESC signal): PWM, Oneshot125, Oneshot42, Multishot,
18. Dail 150, Dail 300, Dail 600
19. USB: Micro USB
20. Current terminal] (current port): yes
21. Voltage sensor (voltage sensor): Yes
22. Dfu button (dfu button): Yes
23. Firmware (Firmware): Betaflight_4.3.0 JHEF 411.HEX
24. Mounting hole: 20 x 20 x 3mm
25. Size: 27 x 27 x 5mm
26. Weight (weight): 4.3g

Note: The BMI 270 gyroscope only supports 4.3.0 firmware. Please do not flash the other version firmware.

Packages Includes: 

1 x JHEMCU F4 NOXE V3  Flight Controller

This product is a combo kit of 1 Flight controller & 1 ESC which are highly efficient to work in drones, we brought this combo of flight controller & ESC  in a chipper price than the market price, This high-performance Flight controller is able to handle your Drone &  model plane controller with 95% accuracy.

ESC (Electronic Speed Controller) comes in the kit is compatible with flight controller they work together very efficiently.

The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand.

The MPU6000 is the most widely used IMU sensor, and it’s used in nearly all of the greatest flight controllers. The reason for this is that it has a high vibration tolerance and can sample the gyro at 8kHz over an SPI interface.

1. Note: Product can vary from images in terms of Color and Design & Damper shown in image is not included in pack

Features:

1. This is a combo kit of Flight controller & ESC
2. High-performance & efficient flight controller & ESC
3. Lightweight, Easy to connect
4. Compact in size
5. The flight controller comes with an ARM processor
6. ESC is built to give the best performance

Packages Includes:

1 x F405 V1.0 Flight Controller

1 x 45A 2-6S 4 in 1 ESC Flytower (mpu6000)

1 x Screw Pack

This product is a combo kit of 1 Flight  controller & 1 ESC which are highly efficient to work in drones, we brought this combo of flight controller & ESC  in chipper price than market price, This  high performance Flight controller is able to handle your Drone &  model plane controller with 95% accuracy.

ESC (Electronic Speed Controller) comes in the kit is compatible with flight controller they work together very efficiently.

The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand.

The MPU6500 is the most widely used IMU sensor, and it’s used in nearly all of the greatest flight controllers. The reason for this is that it has a high vibration tolerance and can sample the gyro at 8kHz over an SPI interface.

Note: Product can vary from images in terms of Color and Design 

Features:

1. This is combo kit of Flight controller & ESC
2. High performance & efficient flight controller & ESC
3. Light weight, Easy to connect
4. Compact in size
5. Flight controller comes with ARM processor
6. ESC is build to give best performance

Specifications:

Flight Controller:

1. Model: F7 MINI V1.0
2. Main control chip: ARM STM32F405RGT6
3. Input voltage: 3-6S Lipo
4. SPI Gyro: MPU6500
5. Barometer: BMP280
6. Power Port: 1 C-Type
7. Firmware: AOCODAF722MINI
8. Weight: 6g
9. Dimensions: 3 x 3 x 1 mm

ESC (Electronic Speed Controller):

1. Product: ESC
2. Current: 35A
3. Lipo: 2-5S
   
4. Programming: YES
5. Weight: 11g
6. Dimension: 3 x 3 x 0.6 mm

Packages Includes:

1 x F7 MINI V1.0 Flight Controller

1 x 35A 2-5S BLHELI_S 4 in 1 ESC Flytower

1 x Screw Pack

Feature:

1. Flight Control Built-in OSD / BEC
2. Micro-SD Back-box
3. Built-in Current Sensor
4. F4 Processor (F405)
5. On-Board Video Filter (only can supply 5V to VTX and Camera)

Specification:

1. SPI Gyro IC268G
2. On-Board OSD (controllered by Betaflight, FC over SPI bus)
3. MicroSD Blackbox
4. Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
5. F4 Processor (F405)
6. 5v3a SBEC
7. Built-in Current Sensor
8. On-Board Video Filter (only can supply 5V to VTX and Camera)

Package include:

1 x F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC

Built with a better Bluetooth/WiFi 2-in-1 chip for 33% faster wireless data transfer. Update FC firmware with your smartphone in just 1 minute! Connect this FC via Bluetooth and fully configure any setting forget flight/Emuflight/INAV as you want.

                   Note: For more technical details go through the Datasheet in the attachment sections

Features:

1. Flash your firmware 33% faster wirelessly + full FC configuration
2. Get your Blackbox data in 1 minute anytime, anywhere
3. 500MB onboard Blackbox flash memory
4. Change your motor direction wirelessly

Package Includes:

1 x SpeedyBee F7 V3 Flight Controller x 1
1 x SpeedyBee BL32 50A 4-in-1 ESC x 1
1 x DJI 6pin Cable(80mm) x 1
1 x SH 1.0mm 15mm-length 8pin Cable(for FC-ESC connection) x 1
5 x M3*8mm Silicone Grommets(for FC)
5 x M3*8.1mm Silicone Grommets(for ESC)
5 x M3*30mm Iner-hexagon Screws
5 x M3 silicone O Ring
5 x M3 Nylon Nut
1 x 35V 1500uF Low ESR Capacitor
1 x XT60 Power Cable(70mm)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(30mm)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(60mm)
1 x 4pin SH1.0 to 4pin JST1.25 FPV Cam Cable(60mm)
1 x 4pin SH1.0 Radio Receiver Cable(100mm)
1 x 4pin SH1.0 to 4pin SH1.0 Analog VTX Cable x
1 x 6pin SH1.0 GPS Module Cable without Connector on another end(100mm)
1 x 6pin SH1.0 GPS Module Cable Connector of another end