Original JHD 16×2 Character LCD Display With Blue Backlight

SKU: 967809
In Stock

199.00

  1. Model: JHD659 B/W
  2. Display: 16×2 character
  3. Outline: 80.0×36.0×14.5
  4. VA: 64.5×14.5
  5. Controller: SPLC780D
  6. Character: 2.95×4.35
  7. Driver: 1/16
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a genuine JHD Display as there are many fake JHD Displays in the Market.

This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers.This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight.

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

For more displays click below,

LED/LCD Display

Note: This is a genuine JHD Display as there are many fake JHD Displays in the Market.


Features :

  1. 16 characters wide, 2 rows
  2. White text on the yellow background
  3. Single LED backlight included can be dimmed easily with a resistor or PWM.
  4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

Specifications:

  1. Model: JHD659 B/W
  2. Display: 16×2 character
  3. Outline: 80.0×36.0×14.5
  4. VA: 64.5×14.5
  5. Controller: SPLC780D
  6. Character: 2.95×4.35
  7. Driver: 1/16
  8. LCD: STN Blue Negative
  9. Backlight: White LED

Package Includes :

1 x JHD 16×2 Character LCD Display With Blue Backlight

Additional information

Model

JHD 16×2

Characters

16

Character Color

White

Backlight

Blue

Input Voltage (V)

5

Length (mm)

80

Width (mm)

36

Height (mm)

14.5

Weight (gm)

30

Quick Comparison

SettingsOriginal JHD 16×2 Character LCD Display With Blue Backlight removeSeeed Studio Grove – 16 x 2 LCD (Black on Red) remove4D System 4.3″ slim Intelligent Display Module and Resistive Touch panel remove4D System 5.0″ gen4 LCD pack for Arduino with case removeWaveshare 7inch QLED Touch Integrated Display, 1024 × 600, Thin and Light Design remove4D System 5.0″ gen4 LCD pack for Arduino remove
NameOriginal JHD 16×2 Character LCD Display With Blue Backlight removeSeeed Studio Grove – 16 x 2 LCD (Black on Red) remove4D System 4.3″ slim Intelligent Display Module and Resistive Touch panel remove4D System 5.0″ gen4 LCD pack for Arduino with case removeWaveshare 7inch QLED Touch Integrated Display, 1024 × 600, Thin and Light Design remove4D System 5.0″ gen4 LCD pack for Arduino remove
Image
SKU96780914211181347865134786713731041347866
Rating
Price199.00749.000.000.006,349.000.00
Stock
In Stock
In Stock
Out of stock
Out of stock
In Stock
Out of stock
AvailabilityIn StockIn StockOut of stockOut of stockIn StockOut of stock
Add to cart

Add to cart

Add to cart

Read more

Read more

Add to cart

Read more

Description
  1. Model: JHD659 B/W
  2. Display: 16×2 character
  3. Outline: 80.0×36.0×14.5
  4. VA: 64.5×14.5
  5. Controller: SPLC780D
  6. Character: 2.95×4.35
  7. Driver: 1/16
  1. Model: 16 x 2 LCD
  2. Voltage: 3.3V/5V
  3. Interface: I2C
  4. Backlight color: Red
  5. Font color: Black
  6. Dimensions: 8 x 4 x 1mm
  7. Weight: 33g
  1. 4.0V to 5.5V range operation (single supply)
  2. Powerful 4.3” Intelligent LCD-TFT display module powered by DIABLO16
  3. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  4. 32Kb of SRAM purely for the User.
  5. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Input

This Product is available on Back order only. For Price and Lead time info contact us at asif@robu.in

  1. 4.0V to 5.5V range operation (single supply)
  2. Powerful 5.0” Intelligent LCDTFT display module powered by DIABLO16.
  3. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4wire Resistive Touch Panel (DT) or Capacitive Touch Panel (DCT).
  4. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  5. 32Kb of SRAM purely for the User.
  6. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
  7. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.

This Product is available on Back order only. For Price and Lead time info contact us at asif@robu.in

  1. Product: Waveshare 7-inch QLED Touch Integrated Display
  2. Input Voltage: 4.75 V
  3. Input Current: 500 Amps
  4. Output Voltage: 3.1 V
  5. Resolution: 1024 (RGB) × 600
  1. Powerful 5.0” Intelligent LCDTFT display module powered by DIABLO16.
  2. 4.0V to 5.5V range operation (single supply).
  3. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4wire Resistive Touch Panel (DT) or Capacitive Touch Panel (DCT).
  4. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  5. 32Kb of SRAM purely for the User.
  6. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs

This Product is available on Back order only. For Price and Lead time info contact us at asif@robu.in

Content

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a genuine JHD Display as there are many fake JHD Displays in the Market.

This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers.This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight.

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

For more displays click below,

LED/LCD Display

Note: This is a genuine JHD Display as there are many fake JHD Displays in the Market.


Features :

  1. 16 characters wide, 2 rows
  2. White text on the yellow background
  3. Single LED backlight included can be dimmed easily with a resistor or PWM.
  4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

Specifications:

  1. Model: JHD659 B/W
  2. Display: 16×2 character
  3. Outline: 80.0×36.0×14.5
  4. VA: 64.5×14.5
  5. Controller: SPLC780D
  6. Character: 2.95×4.35
  7. Driver: 1/16
  8. LCD: STN Blue Negative
  9. Backlight: White LED

Package Includes :

1 x JHD 16×2 Character LCD Display With Blue Backlight

Grove – 16 x 2 LCD is a perfect I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. 16×2 means two lines and each line has 16 columns, 32 characters in total. With the help of Grove I2C connector, only 2 signal pins and 2 power pins are needed. You don’t even need to care about how to connect these pins. Just plug it into the I2C interface on Seeeduino or Arduino/Raspberry Pi+baseshield via the Grove cable. There won’t be complicated wiring, soldering, worrying about burning the LCD caused by the wrong current limiting resistor.


Features:

  1. Display construction: 16 Characters * 2 Lines
  2. Display mode: STN
  3. On board MCU
  4. I2C-bus interface
  5. Support English and Japanese fonts

Specifications:

  1. Model: 16 x 2 LCD
  2. Voltage: 3.3V/5V
  3. Interface: I2C
  4. Backlight color: Red
  5. Font color: Black
  6. Dimensions: 8 x 4 x 1mm
  7. Weight: 33g

Packages Includes:

1 x Seeed Studio Grove – 16 x 2 LCD (Black on Red)

The gen4 4.3” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 4.3” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), Resistive Touch and Capacitive Touch. They is powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 4.3” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the user with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules feature a 30 pin ZIF socket, designed for a 30 pin FFC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules have been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 display module if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.


Features:

  1. Powerful 4.3” Intelligent LCD-TFT display module powered by DIABLO16.
  2. 480 x 272 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel (on DT model only), integrated Capacitive Touch (on DCT model only), or non-touch.
  3. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  4. 32Kb of SRAM purely for the User.
  5. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs
  6. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
  7. DOS compatible file access (FAT16 format) as well as low level access to card memory.
  8. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
  9. Display full colour images, animations, icons and video clips.
  10. Supports all available Windows fonts.
  11. 4.0V to 5.5V range operation (single supply).

Packages Includes:

1 x 4D System 4.3″ slim Intelligent Display Module and Resistive Touch panel

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.


Features:

  1. Powerful 5.0” Intelligent LCDTFT display module powered by DIABLO16.
  2. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4wire Resistive Touch Panel (DT) or Capacitive Touch Panel (DCT).
  3. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  4. 32Kb of SRAM purely for the User.
  5. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
  6. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
  7. DOS compatible file access (FAT16 format) as well as low level access to card memory.
  8. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
  9. Display full colour images, animations, icons and video clips.
  10. Supports all available Windows fonts.
  11. 4.0V to 5.5V range operation (single supply)

Packages Includes:

1 x 4D System 5.0″ gen4 LCD pack for Arduino with case

7-inch QLED Integrated Display, 1024 × 600, Thin And Light Design. The 70H-1024600 series display, designed by Waveshare Team, is for customers who need a lightweight HDMI display. As it is thinner and lighter than any traditional HDMI display, users can do the second development by themselves easily.
For simplifying the display, we integrate the power supply, display, touch, and control signal as the 40PIN multi-functional header. Just need an FPC cable, you can lower the project cost with the thinnest display, and apply it in any embedded projects.


Useful link:

To use this, please follow this tutorial for Hardware and Software  setup.


Features:

  1. 7-inch IPS/QLED screen, 1024 x 600 hardware resolution.
  2. Capacitive touch, supports five-point touch (this function is only for the touch version).
  3. COF thin and light structure, providing 40PIN interface one-line communication, integrated development is more convenient.

Package Includes:

1 x OPTIONS IPS/QLED Display

1 x FPC cable (~ 15cm)

1 x OPTIONS Development Accessories

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.

Note: For more info refer to datasheet


Features:

  1. Powerful 5.0” Intelligent LCD-TFT display module powered by DIABLO16.
  2. 4.0V to 5.5V range operation (single supply).
  3. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel (on DT model only), integrated Capacitive Touch (on DCT model only), or non-touch.
  4. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
  5. 32Kb of SRAM purely for the User.
  6. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
  7. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
  8. DOS compatible file access (FAT16 format) as well as low level access to card memory.
  9. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
  10. Display full colour images, animations, icons and video clips.
  11. Supports all available Windows fonts.

Packages Includes:

1 gen4-uLCD-50DT-SB Extra Bright Intelligent Display Module with Resistive Touch

1 x 4D Arduino Adaptor Shield-II

1 x gen4-IB Interface Board

1 x 30-way 150mm FFC Cable

1 x 5-way female-to-female ribbon cable with male-to-male adaptor

1 x Getting Started Manual Available as a Download

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

JHD 16×2

Characters

16

Character Color

White

Backlight

Blue

Input Voltage (V)

5

Length (mm)

80

Width (mm)

36

Height (mm)

14.5

Weight (gm)

30

Input Voltage (V)

4.75

Input Current (Amps)

500

Output Voltage (V)

3.1

Viewing Angle (Degree)

170

Resolution

1024 (RGB) × 600

Touch Screen Size

173 (H) × 103 (V) × 4.2 (D)

Display Size

164 (H) × 97 (V) × 3.5 (D)

Display Area

154.2144 (W) × 85.92 (H)

Pixel Pitch

0.1506 (H) x 0.1432 (V)

QLED Version Color Gamut

78%NTSC

Brightness (cd/m²)

350

Color Depth

16.7M

Refresh Rate (Hz)

60

User Interface

40PIN 0.5mm FPC