If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×4 Parallel LCD Display is a quite good solution.

This is LCD 16×4 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×4 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 4 line display that has a very clear and high contrast black text upon a yellow background/backlight.

This is the great yellow backlight LCD display. It is fantastic for Arduino based project. This LCD 16×4 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

For more displays click below,

LED/LCD Display

Note: This is a genuine JHD Display as there are many fake JHD Displays in the Market.

Features :

1. 16 characters wide, 4 rows
2. Black text on the yellow background
3. Single LED backlight included can be dimmed easily with a resistor or PWM.
4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

Package Includes :

1 x JHD 16×4 Character LCD Display With Yellow Backlight

1. Lithium Polymer battery support, with built in battery charger and automatic change-over
2. Dedicated PWM Audio pin driven by WAV files from micro-SD card
3. On-board audio amplifier with a tiny 8Ω speaker for sound generation and WAV file playback
4. Built in extensive 4DGL graphics and system library functions
5. Display full colour images, animations, icons and video clips
6. Supports all available Windows fonts
7. A 30 pin header for I/O expansion and future plug-in daughter boards
8. 4.0V to 5.5V range operation (single supply)
9. Module dimensions: 52.1 x 72 x 16mm (including corner plates)
10. Weighing ~ 41g
11. Display Viewing Area: 43.2 x 57.6mm
12. 4 x corner plates with 2.7mm holes for mechanical mounting
13. RoHS Compliant
14. CE Compliant (On modules with CE Mark)

Packages Includes:

1 x 4D System 2.8″ LCD Pack compatible with Raspberry Pi

Capacitive touch screen technology USES the human body’s current induction to work. The capacitive touch screen is a four-layer composite glass screen. The inner surface of the glass screen and the interlayer are coated with one layer of ITO respectively, This conductive material responds when contacted by another electrical conductor, like your bare finger. When you touch your screen, an electric circuit is completed at the point where your finger makes contact, changing the electrical charge at this location.

Most mobile phones have both types of screens. A capacitive touchscreen is a type of touchscreen that is as transparent as glass and does not display any content or glow, it is used to sense the user’s touch actions. The TFT screen is the real screen. This is a10.1 Inch Capacitive Touch Screen LCD from waveshare, with a resolution of 1024×600 and a capacitive touch panel, which supports Raspberry Pi, Jetson Nano, Windows, and Game consoles and can also be used as a computer monitor. This product supports Windows 10 / 8.1 / 8 / 7, Raspbian / Ubuntu / Kali / Retropie, and WIN10 IoT systems single-point touch.

Applications:

1. Industrial Control
2. Charging Pile
3. Smart Home
4. Medical
5. Internet of Things
6. Robot,
7. Vehicle-mounted instruments,
8. Vending instruments
9. Intelligent CNC, cosmetic instruments

Features:

1. 1024×600 high resolution.
2. Capacitive touch control.
3. When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free.
4. When working as a computer monitor, supports Windows 10/8.1/8/7/XP, single touch, and driver free.
5. Supports BB Black, and comes with an Angstrom image.
6. Multi-language OSD menu, for power management, brightness/contrast adjustment, etc.
7. Supports 100-level backlight adjustment.
8. Firmware is up-gradable to support more new features (continually updated).

Specifications:

1. LCD Type: IPS
2. Interface: RGB
3. Touch Controller: GT7385
4. Touch Panel Type: Capacitive (10-point touch)
5. Backlight: LED
6. Display Size: (mm) 223.00 × 125.28
7. Dot Pitch (mm): 0.2175 × 0.2088
8. Aspect Ratio: 16:9
9. Resolution: 1024 × 600 (Pixel)
10. Power Consumption: TBD
11. Backlight Current: TBD
12. Operating Temperatur:e 0 ~ 70℃

 Packages Includes:

1 x Waveshare 10.1inch Capacitive Touch LCD (F), 1024 × 600, Toughened Glass, IPS Panel

This is a 1.9-inch LCD Display Module with 170×320 Resolution. It supports SPI Interface, IPS, and 262K Colors output quality.

Features:

1. 170×320 resolution, 262K colors, clear and colorful displaying effect
2. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
3. Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

1. Operating Voltage: 3.3v / 5v
2. Resolution: 170 × 320 Pixels
3. Communication Interface: 4-wire Spi
4. Display Size: 22.70 × 42.72 Mm
5. Display Panel Ips Pixel Size: 0.1335 × 0.1335 Mm
6. Driver: ST7789v2
7. Module Size: 27.3 × 51.2mm

Package Includes:

1 x Waveshare 1.9inch LCD Display Module

The 70H-1024600 series display, designed by Waveshare Team, is for customers who need a lightweight HDMI display. As it is thinner and lighter than any traditional HDMI display, users can do the second development by themselves easily.
For simplifying the display, we integrate the power supply, display, touch, and control signal as the 40PIN multi-functional header. Just need an FPC cable, you can lower the project cost with the thinnest display, and apply it in any embedded projects.

Features:

1. Support Windows / Linux / Android Main Board Which Has HDMI Signal And USB Touch Signal
2. Provide Secondary Development Resources To Facilitate Integrated Design
3. Boost Simple Development For Embedding Engineering Applications Quickly

Package Includes:

1 x OPTIONS IPS/QLED Display

1 x FPC cable (~ 15cm)

1 x OPTIONS Development Accessories

The 8 inch 2K Capacitive Touch Display is a high-quality display screen designed for use in various electronic devices such as tablets, smartphones, and other portable devices. This display features a 1536×2048 resolution, providing sharp and clear images and videos. The IPS technology ensures wide viewing angles and accurate color reproduction, making it ideal for media consumption and gaming.

The display also features an optical bonding toughened glass panel, which increases its durability and protects it from scratches and other forms of damage. The toughened glass panel also reduces glare and enhances the display’s visual clarity.

Features:

1. 8″ 2K Touch Display
2. 2K High Resolution
3. up to 10-point touch, depending on the operating system
4. up to 6H hardness toughened glass panel
5. Optical Bonding, display well and dustproof
6. Built-In Ferrite Hi-Fi Speaker, Dual-Track Support
7. Support Touch Screen Customization
8. Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B.
9. Excellent Display Performance With 178° Wide Viewing Angle

Specifications:

1. Size: 8″
2. Resolution: 1536×2048
3. Display Interface: HDMI
4. Display Panel: IPS
5. Viewing Angle: 178°
6. Touch Type: Capacitive
7. Touch Points: 10-Point
8. Touch Port: USB Type-C
9. Touch Panel: Toughened Glass
10. Touch Panel Tech: Optical Bonding
11. Sound: Hi-Fi Speaker
12. Audio Output: 3.5mm Jack
13. Enclosure: CNC Process Alloy

Package Includes:

1 x 8inch 2K Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1536×2048, IPS, High Compatibility