PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm)

SKU: 913163
Out of stock

580.00

Add to Wishlist
Add to Wishlist
  1. Support the most popular programming PIC chips, read, encryption and other features!
  2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
  3. PICSTARTPLUS much faster rate than programming.
  4. Can easily read the contents of the chip program area.
  5. Automatic programming verification.
  6. Comprehensive information prompts, allowing users to understand the working state.
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:

Description

The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer. This supports most popular PIC chips, programmed, readout, encryption, use a high-speed USB communication, fast programming.

The programming quality is stable and reliable. (speed average PICSTART + 3-5 times) fully automatic programming checksum. This is equipped with a 40pin DIP programming Block, direct programming of an 8pin – 40pin DIP chip. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software.

Software-compatible with PIC K150 is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ Windows 10 operating system. The new device will vary with the PIC escalating. Master chip retains the DIP package with the seat.

 

Note: This programmer module is compatible with 10 mm to 14 mm IC body width, we have another variant of this product for 4mm IC body width Click here


Features :

  1. Support the most popular programming PIC chips, read, encryption and other features!
  2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
  3. PICSTARTPLUS much faster rate than programming.
  4. Can easily read the contents of the chip program area.
  5. Automatic programming verification.
  6. Comprehensive information prompts, allowing users to understand the working state.
  7. With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip can be programmed Using ICSP online or add conversion blocks. 8 pin 40 pin-board outside the chip can be downloaded directly online ICSP output.
  8. Compatible with Windows98 and Windows2000/NT, Windows XP / Windows 7, and some other operating systems.
  9. Programming software provides easy-to-use instructions.
  10. Can not program CIs from family 18F

Useful Links:

Getting started with K150 USB PIC Programmer and Software Download


Package Includes :

1 x PIC K150 USB Automatic Programming Develop Microcontroller Programmer Board with Spacer.
1 x ICSP cable.
1 x USB cable.

Additional information

Board Dimensions(mm)(LxWxH)

82x54x14

USB Cable Length

1.37 Meter

ICSP Cable Length

30 cm

Compatible with IC body width (mm)

10 to 14

Quick Comparison

SettingsPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm) removePICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo removeSTMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho removeMICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID removeRT809F Serial ISP Programmer Standard Configuration removeProgrammer Testing Clip SOP8 SOP16 SOP SOIC 8 SOIC 16 SOIC8 SOIC16 SOIC8 DIP16 DIP 8 Pin DIP 16 Pin IC Test Clamp Without Cable remove
NamePIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm) removePICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo removeSTMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho removeMICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID removeRT809F Serial ISP Programmer Standard Configuration removeProgrammer Testing Clip SOP8 SOP16 SOP SOIC 8 SOIC 16 SOIC8 SOIC16 SOIC8 DIP16 DIP 8 Pin DIP 16 Pin IC Test Clamp Without Cable remove
Image
SKU9131631150769147014114701261165447975822
Rating
Price580.002,825.001,549.00 1,549.004,183.00163.00
Stock
Out of stock
In Stock
Out of stock
In Stock
In Stock
In Stock
AvailabilityOut of stockIn StockOut of stockIn StockIn StockIn Stock
Add to cart

Read more

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
  1. Support the most popular programming PIC chips, read, encryption and other features!
  2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
  3. PICSTARTPLUS much faster rate than programming.
  4. Can easily read the contents of the chip program area.
  5. Automatic programming verification.
  6. Comprehensive information prompts, allowing users to understand the working state.
  1. Type: Debugger/Programmer
  2. Tool/Board Application: Debugging/Programming
  3. MCU Supported Families: Flash-based PIC MCUs
  4. Core Architecture: PIC, dsPIC
  1. USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
  2. USB communication (LD1), user LED (LD2), power LED (LD3)
  3. Two push buttons – USER and RESET
  4. USB re-enumeration capability – virtual com port, mass storage, debug port
  5. Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
  1. Model: MICROCHIP Evaluation Kit, ATSAMD10 MCU
  2. Free Atmel IDE for development of C/C++ and assembler code for Atmel microcontrollers
  3. Programming and debugging the ATSAMD10 Xplained Mini
  4. You can programming the ATmega32U4 Using a Bootloader
  5. Xplained Pro extension headers can easily be strapped in
  1. Type: Drive IC
  2. Input Voltage: 5V
  3. Application: Computer
  4.  Language: English
  5. System supported: WinXP / Win7 / Win8 / Win2003 / Win2008 / WinVist
  1. Connector type: Test Clip
  2. Pin format: SOIC / SOP
  3. Color: Black
  4. Material: Plastic
Content

The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer. This supports most popular PIC chips, programmed, readout, encryption, use a high-speed USB communication, fast programming.

The programming quality is stable and reliable. (speed average PICSTART + 3-5 times) fully automatic programming checksum. This is equipped with a 40pin DIP programming Block, direct programming of an 8pin – 40pin DIP chip. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software.

Software-compatible with PIC K150 is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ Windows 10 operating system. The new device will vary with the PIC escalating. Master chip retains the DIP package with the seat.

 

Note: This programmer module is compatible with 10 mm to 14 mm IC body width, we have another variant of this product for 4mm IC body width Click here


Features :

  1. Support the most popular programming PIC chips, read, encryption and other features!
  2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
  3. PICSTARTPLUS much faster rate than programming.
  4. Can easily read the contents of the chip program area.
  5. Automatic programming verification.
  6. Comprehensive information prompts, allowing users to understand the working state.
  7. With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip can be programmed Using ICSP online or add conversion blocks. 8 pin 40 pin-board outside the chip can be downloaded directly online ICSP output.
  8. Compatible with Windows98 and Windows2000/NT, Windows XP / Windows 7, and some other operating systems.
  9. Programming software provides easy-to-use instructions.
  10. Can not program CIs from family 18F

Useful Links:

Getting started with K150 USB PIC Programmer and Software Download


Package Includes :

1 x PIC K150 USB Automatic Programming Develop Microcontroller Programmer Board with Spacer.
1 x ICSP cable.
1 x USB cable.

PICkit 3.5+ In-Circuit Debugger/Programmer compatible to Microchip uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The PICkit3.5+ allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE)
This is an upgrade from the Pickit 3 programmer with the programming to go feature.

Features: 

  1. USB (Full speed 12 Mbits/s interface to host PC)
  2. Real-time execution
  3. MPLAB IDE compatible (free download from Microchip)
  4. Built-in over-voltage/short circuit monitor
  5. Firmware upgradeable from PC/web download
  6. Totally enclosed
  7. Diagnostic LEDs (power, busy, error)
  8. Read/write program and data memory of the microcontroller
  9. Erase of program memory space with verification
  10. Freeze-peripherals at breakpoint
  11. Program up to 512K byte flash with the Programmer-to-Go
  12. ICSP cable included

Specification:

  1. Type: Debugger/Programmer
  2. Tool/Board Application: Debugging/Programming
  3. MCU Supported Families: Flash-based PIC MCUs
  4. Core Architecture: PIC, dsPIC
  5. IC Product Type: In-Circuit Debugger

Package Includes:

1 x PICKIT3.5 KIT3.5 Programer Simulator without Microchip Logo

The STM32 Nucleo-64 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode. The ARDUINO Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.


Features:

  1. Small size, easy to use & high performance
  2. Advanced Security Features
  3. Low voltage, low power consumption
  4. Enhanced User Interfaces
  5. Best for DIY projects

Packages Includes:

1 x STMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho

This user guide describes how to get started with the Atmel® ATSAMD10 Xplained Mini board. The ATSAMD10 Xplained Mini evaluation kit is a
hardware platform to evaluate the Atmel ATSAMD10 microcontroller. The evaluation kit comes with a fully integrated debugger that provides seamless integration with Atmel Studio 6.2 (and later version). The kit provides access to the features of the ATSAMD10 enabling easy integration of the device in a custom design

Note: For more info refer to datasheet i attachment section


Features:

  1. Small size, easy to use & high performance
  2. Advanced Security Features
  3. Low voltage, low power consumption.
  4. Enhanced User Interfaces
  5. Best for DIY projects

Packages Includes:

1 x MICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID

AVR and 8051 ISP Programmer is a low-cost USB based programmer, easy to use, works with AVRDude, and is tested extensively on a Windows, Linux desktop. This is ISP(In-System Programmer) programmer therefore you can program your target microcontroller without removing it from your development board. RT809F is a kind of cost-effective, reliable and fast universal programmer series, suitable for all computers or laptops based on Pentium IV processors or better processors. When working it can communicate with the USB2.0 fast port of the computer directly, with driver programs inside the software, which makes installing operation more convenient.
The programmer using FPGA internal control, PC software upgrades can be completed by programming the function itself to upgrade, compatible with more models; using a USB interface, power supply, and communications, eliminating the need for a bulky power adapter, easier to use; programmer lock tight seat interfaces, has anti-static and port IO protection measures to ensure the reliability of the programmer; locking seat can be easily removed for easy user replacement.


Features: 

  1. Supports computer motherboards, laptop, LCD, routers chips
  2. Supported DDR1/DDR2/DDR3 SPD memory chip
  3. Supporting notebook 8 feet, 14 feet password chip and battery chip
  4. Supports 24 full range IIC bus EEPROM memory
  5. Supporting a full range of SPI bus 25,26 FLASH memory
  6. Supporting 93 full range Micro Wire bus memory.
  7. Exclusive support RTD2120 chip dual-BANK online read and writes functions
  8. Supports LCD monitors and LCD TVs DDC-EDID data read and written online
  9. Support laptop screen EDID data read and written online

Package Includes:

1 x RT809F Serial ISP Programmer Standard Configuration

This is a Programmer Testing Clip IC Test Clamp for different sizes of IC.


Package Includes:

1 x Programmer Testing Clip SOP SOIC IC Test Clamp

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Board Dimensions(mm)(LxWxH)

82x54x14

USB Cable Length

1.37 Meter

ICSP Cable Length

30 cm

Compatible with IC body width (mm)

10 to 14

Model

STM32F410RB Nucleo-64 MCU

System

Windows OS (7, 8 and 10), Linux 64-bit, or macOS

Crystal oscillator

32.768 kHz

Flash memory

512 Kbytes

MCU series in STM32 Arm Cortex MCUs

STM32L4 Series

MCU product line in the series

STM32L452

Board connectors

ARDUINO Uno V3 expansion connector ST morpho extension pin headers for full access to all STM32 I/Os

Board-specific

External SMPS to generate Vcore logic supply 24 MHz HSE

Model

MICROCHIP Evaluation Kit, ATSAMD10 MCU

Regulator

3.3V

External target clk

8MHz

Compatible

Arduino shield compatible foot prints

Programming and debugging

Programming and debugging the ATSAMD10 Xplained Mini. The target microcontroller is the ATSAMD10. The mEDBG FW is running on the ATmega32U4

Type

Drive IC

Input Voltage (V)

5

Application

Computer

Connector Type

Test Clip

Pin Format

SOIC / SOP

Color

Black

Material

PLA+Copper

Length (mm)

50

Width (mm)

25

Height (mm)

10

Weight (gm)

25