These rectangular high modulus Pultruded Carbon Fiber Strip available in various lengths. These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.

Application: Pultruded carbon fiber strip is used for racing drones, RC helicopter wing, RC aeroplanes and RC sailboats, kite spars and many DIY applications.

Explore the category and select the required length.

Features:

1. Pultruded strip means that all the fibers are in one direction, which makes it stronger than the intension of the woven tube
2. Lightweight, strong as metal but only one fifth in weight. Corrosion-resistant and heat-resisting.
3. Smooth surface. Made from high tensile and modulus unidirectional carbon fiber, with a polishing finish.

Package Includes:

1 x Pultruded 10mm x 2mm x 1000mm Carbon Fiber Strip-(Pack of 2)

Pultruded carbon fiber round tube(Hollow) manufactured from 100% unidirectional carbon fiber, which gives them excellent strength along their length but does make them vulnerable to crushing forces.

Pultruded tubes are ideal for scale aircraft, gliders, helicopter or any construction that requires strength, rigidity, and lightness. The Pultrusion process allows incredible tiny diameter tubes to be produced.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. High Strength
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Package Includes:

1 x Pultruded Carbon Fiber Tube (Hollow) 6mm * 4mm * 500mm (Pack of 2)

Pultruded carbon fiber square tube(Hollow) manufactured from 100% unidirectional carbon fiber, which gives them excellent strength along their length but does make them vulnerable to crushing forces.

Pultruded tubes are ideal for scale aircraft, gliders, helicopter or any construction that requires strength, rigidity, and lightness. The Pultrusion process allows incredible tiny diameter tubes to be produced.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fiber through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. High Strength
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Package Includes:

1 x Pultruded Square Carbon Hollow Fiber Tube 4*4mm(OD) * 3mm(ID) * 200mm(L)-(Pack of 2)

Whether you’re making your own drone frames, car chassis, firewalls, bulkheads or any other custom designs that require high strength, lightweight material, these quality carbon fiber sheets are more than up to the task. Aerospace and space were some of the first industries to adopt carbon fiber. The high modulus of carbon fiber makes it suitable structurally to replace alloys such as aluminum and titanium.

These high-quality carbon fiber sheets plate come in various sizes, made from 100%, 3K plain weave, carbon fiber, and finished with a matt surface on both sides. Unlike many low-cost carbon sheets that are made by pressing two outer skins of carbon fiber over a carbon and resin core, these plates are made with layered sheets of carbon fiber and resin, making them the same strength all the way through.

Features:

1. Made of Carbon Fiber material
2. Very Strong and Light
3. Smooth finish
4. High Tensile Strength
5. Excellent quality
6. Resistance to ultraviolet light.
7. Anti-aging and corrosion resistance.

Package Includes:

1 x Carbon Fiber Sheet Plate 125mm *75mm *4mm

Pultruded carbon fiber rod (Solid) 4mm * 1000mm offer extremely high strength and stiffness because they contain 95% unidirectional carbon fiber running longitudinally. Carbon Fiber Solid Rods are made from continuous carbon fibres in a resin matrix of either vinyl-ester or epoxy.

Carbon fiber rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use in recreational sports equipment like kites and radio-controlled models.

Pultrusion :

Pultrusion is a method of manufacturing continuous lengths of a fibre-reinforced section by pulling continuous strands of carbon fiber through resin and a former before curing the resin all in one process.

Features:

1. Made of Carbon Fiber material
2. Very Strong and Light
3. high strength and stiffness
4. Very high Rigidity
5. very low coefficient of expansion

Package Includes:

1 x Pultruded Carbon Fiber Rod (Solid) 4mm * 1000mm (Pack of 2)

Carbon fibre tubes can be used to replace aluminium or steel tubes in a wide range of projects. The Carbon fibre tube of the same weight as an aluminium or steel tube can be much stronger and lighter. This 20mm roll wrapped carbon fibre tube is manufactured predominantly using high modulus  unidirectional prepreg carbon fibre oriented to provide maximum strength in the lateral axis.

Roll wrapped carbon fibre tubes offer superior strength in general use to ‘pultruded’ tubes (which have all their fibres running in exactly the same direction.

The use of unidirectional fibres and maximum strength in the lateral axis does mean that the tube is not strong across its diameter as it is along its length so should be used in such a way as to avoid unnecessary crushing forces across the tube.

Roll Wrapping:

The phrase ‘roll wrapped’ refers to the process used to manufacture these tubes. The prepreg carbon fibre is first laid up around a mandrel in multiple layers. Once the reinforcement is in place it is spiral-wrapped with heat-shrink tape before the whole assembly is oven cured.

Features:

1. Made of Carbon Fiber material
2. High Strength
3. Stable dimension and UV resistant
4. High Corrosion  Resistance
5. Electrical & Thermal Non-Conductivity

Package Includes:

1 x 3K Roll-wrapped Carbon Fiber Tube (Hollow)20mm(OD)*18mm(ID)*500mm(L)