PZEM-020 10A AC Digital Display Power Monitor Meter Voltmeter Ammeter Frequency Factor Meter (Without CT) is a  monitoring system for parameters like voltage, current, active power, energy, frequency, power factor, etc. The display comes with a high-quality current sensor with the help of which you can easily measure the current flowing through the wire by using the noncontact method, which means there is no physical contact between the wire and the meter.

1. Electrical parameter measurement function: voltage, current, active power, energy, frequency, power factor
2. Overload alarm function: overpower alarm threshold, backlight, and power flashing to alarm
3. Power alarm threshold preset function: can set power alarm threshold
4. The energy can be reset using the key
5. Store data when power off
6. Large-screen LCD can display six parameters at the same time
7. Backlight function  

LED Digital Triple  Display Voltmeter Ammeter & hertz meter is a panel-mount device for current, voltage  and frequency monitoring. It gives you the best user experience for your projects it is lightweight, high quality, and durable

Note: Image may vary from actual product in terms of design, color and brand printed

Features:

1. Easy for installation
2. Compact & small in size
3. Good environmental Protections
4. Very low Power consumption

Package Includes:

1 x Blue AC50-500V 0-100A 0- 100Hz 22mm AD16-22AVHz Square LED Voltage Current Hertz 3 IN 1 Indicator

Voltage Testers are electronic devices with an amplified signal that may detect changes in the electric field around AC-energized items. No direct metallic contact with the circuit is required to establish the findings. A non-contact voltage tester is used to indicate if power is off without touching any wires.

Voltage is detected in cables, cords, circuit breakers, light fixtures, switches, outlets, and wires, as well as AC voltage in doorbells, thermostats, low-voltage lighting, and irrigation systems. Both visual and audio signals are included.

Operating Instructions:

1. Turning ON/OFF: Press and hold the power button for more than 1 second; the buzzer will sound, all of the indicator lights will flash once, and the system will enter the test mode. If it is turned ON, long-press the power switch button to turn it OFF.
2. High/Low Sensitivity Switch: The default setting is the low sensitivity test mode. Press the ON/OFF button/sensitivity (less than 1 second) to switch between high and low sensitivity. It is in the high-sensitivity test mode when the sensitivity indicator light is ON. It is in the low sensitivity test mode when the sensitivity indicator light is OFF.
3. Flashlight: press the flashlight button to turn it ON, and press again to turn it OFF
4. AC Voltage Detection: When you place the probe of the tester near an AC voltage source, the signal indicator light will turn ON, the sensitivity indicator light will turn ON, and the buzzer’s beep will speed up or slow down depending on the signal strength.

• Note:

1. When you need to test the neutral and live wires that are near each other try to test them separately; if they cannot be separated, identified based on the detected signal intensity. The live wire is the one that has a strong signal, while the neutral wire has a weak signal.
2. This tester needs a 2 x AAA battery is not included with this pack you have to buy it separately. 

Features:

1. You can use the flashlight function to provide convenience for working in the dark
2. Easy to use and carry as a portable Pen tester
3. Contactless operation
4. IP 65 protection rating
5. Signal straight indicator

Specification:

1. High Sensitivity Range: 12V to 1000V AC : sensitivity indicator light is ON, buzzer sound speed up
2. Low Sensitivity Mode: 48V to 1000V AC : sensitivity indicator light is OFF, buzzer sound slows down
3. Signal indicator light will turn ON
4. Sensitivity indicator light will turn ON
5. Buzzer’s beep will speed up or slow down depending on the signal strength.
6. Live wire will denote by a strong signal
7. Neutral wire can be detected by a weak signal
8. Operating Voltage: 3V DC (2 x AAA Battery not included)
9. Dimensions (L x D)mm : 150 x 25
10. Weight: 36gm (without battery)

Package Includes:

1 x Plusivo Non-Contact AC Voltage Detector

1 x Additional Accessories Set

1 x User Manual

LED Digital Dual Display Voltmeter Ammeter  (0-100A and 50-500V) is a panel-mount device for current and voltage monitoring. It gives you the best user experience for your projects it is lightweight, high quality, and durable

Note: Image may vary from actual product in terms of design, color and brand printed

Features:

1. Easy for installation
2. Compact & small in size
3. Good environmental Protections
4. Very low Power consumption

Package Includes:

1 x Yellow AC50-500V 0-100A 22mm AD16-22DVA Round LED Indicator Light with Transformer

AD16-22 FVA LED Digital Dual Display Voltmeter Ammeter Green (0-100A and 60-500V) is a panel-mount device for current and voltage monitoring. It gives you the best user experience for your projects it is lightweight, high quality, and durable

Note: Image may vary from actual product in terms of design, color and brand printed

Features:

1. Easy for installation
2. Compact & small in size
3. Good environmental Protections
4. Very low Power consumption

Package Includes:

1 x Green AC50-500V 0-100A 22mm AD16-22FVA Square Cover LED Voltage and Current Dual Display

Avoid conventional color bulbs to monitor a phase/line signal, and replace them with these new powerful LED  Indicators with with various advantages over the old bulbs.  This New pilot lamp uses LEDs as a light source which is energy-saving & , small and compact, and highly durable which adds a systematic and classy look to your control dashboard or signal monitoring spot on any device or chassis. The cover of this pilot indicator is made of PC plastic to provide good shock resistance and can be used as an indication for pilot lights, accident signals, or other power availability check signals in the circuits of telecommunication and electrical apparatus

We have added a full range of this Pilot light indicator with various colors, sizes, and operating voltages. Explore the category and find the best-suited one for your application

Note: Image can vary from actual product

Features:

1. Easy for installation
2. Good environmental Protections
3. Very low Power consumption
4. Available in various sizes, colors, and voltage rating

Package Includes:

1 x Blue 10-24V 6mm LED Metal Indicator Light with 15CM Cable