This is a Quanum 30A continuous Brushless Speed Controller ESC with 5V/2A BEC. The power input uses extremely low output resistance greatly enhances power stability and has a protective effect on the battery. Separately voltage regulator IC for the microprocessor. Providing good anti-jamming capability. The 30A Quanum Brushless Speed Controller Electronic Speed Controller has been designed specifically with multi-rotors in mind, fast throttle response, ultra-low resistance MOSFETs, small and lightweight, a thicker PCB for better heat dissipation, and much more.

Features:

1. All the components are of the original quality to ensure high quality and reliability.
2. Import MOSFET with ultra-low resistance and 4 layers 3OZ copper plate for strong withstanding current.
3. Three start modes: regular start, soft start, and super soft start, which compatible with fixed-wing aircraft and helicopters.
4. Programmable throttle curve suitable for all kinds of remote controllers. Smooth and exquisite speed regulation, perfect speed linear.
5. The maximum rotation speed can up to 210000 RPM (2 poles motor), 70000 RPM (6 poles motor), 35000 RPM (12 poles motor).
6. Multiple protection: input voltage abnormality protection, low voltage battery protection, overheat protection, throttle signal loss protection, etc.

Package Includes:

1 x Quanum 30A Brushless Speed Controller ESC

An ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky Simonk 30A ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky Simonk 30A ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
7. Ultra-low resistance MOSFET, strong flow capacity

Specifications:

1. Cont Current: 30A
2. Burst Current: 35A
3. BEC Model: Linear mode
4. BEC Output: 5V2A
5. Li-ion/Li0poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH
6. Connector: Banana Connector (Female)
7. Connector size: 3.5mm
8. Weight: 23g
9. Dimension: 6 x 3 x 1mm

Packages Includes:

1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)

Bidirectional 30A 2-4s UBEC 2A 5V. It can be used in cars, ships, and underwater thrusters. No need to calibrate the throttle stroke, plug, and play. This product adopts imported components, a full power test. bidirectional  power output, no brake, direct reverse, quick response, and good handling.

Features: 

1. Provide large output current
2. Overcurrent and overheat protection function
3. The max efficiency of the chip is up to
4. The small size and the light weight make it very convenient to use

Package Includes:

1 x Bidirectional 30A 2-4s UBEC 2A 5V

The Holybro Kakute H7 BT + Tekko32 F4 50A 4-in-1 ESC stack brings lots of power all in a 30.5×30.5 mounting size! This stack can push 50A all while bringing you the latest features!

The Holybro Kakute H7 v2 Flight Controller is full of features including integrated Bluetooth, HD camera plug, dual plug-and-play 4in1 ESC ports, 9V VTX ON/OFF Pit Switch, barometer, OSD, 6x UARTs, 128MB Flash for Logging, 5V and 9V BEC, and bigger soldering pad with easy layout and much more.

The Kakute H7 v2 builds upon the best features of its F7 predecessor and further improves on hardware components and layout. With the additional integrated Bluetooth chip onboard, you can perform configuration and tuning wirelessly on your phone with the SpeedyBee Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V regulator designed to power your HD video transmitter such as the DJI/Caddx FPV Air Unit & Caddx Vista while supporting an analog system.

It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, and getting ready for a race while preventing it from overheating or interfering with others flying. It has 6x dedicated UART ports with built-in inversion for peripherals (UART2 is used for Bluetooth telemetry), a 128 MB Flash for logging, Dual plug-and-play 4in1 ESC connectors, allowing easy plug-and-play support for x8 & Octocopter configuration and keeping it simple and clean.  The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features, and more. It is also ready for autonomous flight with the onboard barometer. There are LED & buzzer pads, an I2C pads (SDA & SCL) for external GPS/Magnetometers.

Specifications:

1. MCU – STM32H743 32-bit processor running at 480 MHz
2. IMU – MPU6000
3. Barometer – BMP280
4. OSD – AT7456E
5. Onboard Bluetooth chip – ESP32-C3
6. SpeedyBee IOS & Android App Compatible
7. Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
8. 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
9. 9x PWM Outputs (8 Motor Output, 1 LED)
10. 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
11. 1x JST-GH1.5_6pin port (For HD System like Caddx Vista & Air Unit)
12. Battery input voltage: 7V to 42V
13. BEC 5V 2A Cont.
14. BEC 9V 1.5A Cont.
15. Mounting – 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
16. Dimension – 35x35mm
17. Weight – 8g

Package Includes:

1 x Holybro Kakute H7 V2 FC & Tekko32 F4 4in1 50A ESC STACK

This T-motor 180A 12S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 180A, and a peak current of up to 200A (10 sec).

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Continuous Current (A): 180
2. Peak Current (10s): 200
3. BEC: N0
4. LIPO: 6-12s
5. Programmable: No
6. Dimension: 112 x 51 x 36 mm
7. Weight: 280 g

Package Includes:

1 x T motor Flame 180A 12S

This T-motor 200A 14S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 200A, and a peak current of up to 240A (10Sec).

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Continuous Current (A): 200
2. Peak Current (10sec): 240
3. BEC: N0
4. LIPO: 6-14s
5. Programmable: No

Package Includes:

1 x T motor Flame 200A 14S