SMA Female PCB Connector Vertical Type 50Ohm Gold Plating

We at robu offers, a full range of cable mount BNC/TNC and a diverse range of RF connectors plugs, jacks and bulkhead jacks. These connectors are designed to provide compatibility with industry-grade 50 ohm and 75-ohm cables for longer operational life with gold and nickel plating for environmental protections.

A range of standard items is listed in the category RF Connectors. Explore the Category for more cable mount as well as PCB/Panel Mount RF connectors that suits your needs. Contact us for any other specific requirements.

Appliance:

• Aerospace and Defense: Hand-held field Device and Instrumentation
• Medical: Instrumentation
• Commercial Vehicle: Bluetooth and GPS
• Telecommunications: Wireless Base Stations, Cellular Mobile System
• Data/Communications:Wifi, WiMAX
• Industrial: Active and passive components, instrumentation, M2M Communications, Vehicle Tracking System

Features:

1. SMA Connector, Female, Straight,50Ohm, Through Hole, PCB Mount, Copper, Gold Plating;
2. Excellent electrical performance up to 18GHz with low reflection;
3. Thread type coupling mechanism ensure small loss and high security in a compact design;

Mechanical Characteristics

1. Coupling: 1/4-36 thread
2. Contact Retention: 15 in-lbs min.
3. Coupling nut torque: 30 in-lbs. min.
4. Durability(mating) ≧ 500 cycles (For Beryllium Copper Contact)

Environmental Characteristics

1. Temperature Range: -55°C ~ +155°C
2. Vibration: MIL-STD-202 Meth.204
3. Corrosion resistance: MIL-STD-202 Meth. 101

Note: Refer Schematic Image for Dimensional Details

Package Includes:

1 x SMA Female PCB Connector Vertical Type 50Ohm Gold Plating

This is a non-contact liquid level sensor with a status indicator and adjustable sensitivity. It is especially suitable for detecting the liquid level of all sorts of non-metal tubes(outer diameter D≤10MM). The status feedback of the sensor can be given in real-time. Besides that, the sensor comes with a 4pin sensor adaptor that can directly collect digital signal, convenient for connecting with Arduino or other main-controllers.

This liquid level sensor can be widely used in liquid detection of water dispenser, small pipes, and perfusion tubes.

This non-contact liquid level sensor is developed on advanced signal process technology by high-speed signal processing chip. It can measure the liquid level of a closed container and it will not be affected by corrosive liquids like strong acid and alkali, or other impurities.

Specifications:

Onboard power and signal isolation, provide stable isolated voltage, high reliability and strong anti-interference. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, anti-electrostatic. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage protection, improves shock resistance

TTL TO RS422 (B) is an industrial-grade rail-mounted electrically isolated TTL-to-RS485 serial converter.

Features:

1. Product Type: Galvanic isolated TTL to RS422 converter
2. Power supply: 3.3V ~ 5V
3. Protection: over-voltage, reverse-proof
4. Device Port: TTL/RS422 standard compatible

TTL:

1. Connector: screw terminal
2. Transmission distance: about 10m
3. Transmission mode: point-to-point

RS 422:

1. Connector: screw terminal
2. Protection: surge-suppress and 15KV ESD protection
3. Terminal resistor: 120R, enabled/disabled via jumper (inside the case)
4. Transmission Distance: About 1.2km
5. Transmission Mode: full duplex mode, point-to-multipoint (up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)

Appearance:

1. Case: Rail-mount ABS case, suitable for 35mm DIN rail
2. Dimensions: 106.0 × 58.6 × 36.0mm

Packages Includes:

1 x Waveshare Rail-mount TTL To RS422 Galvanic isolated Converter, Anti-surge, Multiple Isolation Protection

This is a 100uF 16V 10% 2917 SMD Tantalum Capacitor. These capacitors are popular for general low power DC/DC and LDO devices, entertainment / Infotainment systems and height restricted design.

Package Includes:

1 x 100uF 16V 2917 SMD Tantalum Capacitor (Pack of 5).

Degson 3 Pin 5.0 mm Pitch Pluggable Terminal Block is an electrical component that allows wires to be easily connected and disconnected. It consists of a plastic housing with three metal connectors, which are used to attach the wires. The 5.0 mm pitch refers to the distance between the connectors, which is the standard spacing used for many terminal blocks.

The “pluggable” feature of this terminal block means that it can be easily connected and disconnected from other components, without the need for any tools. This makes it a convenient solution for applications that require frequent maintenance or repairs.

The 3-pin configuration means that it can accommodate up to three wires, which makes it suitable for a range of applications, including industrial automation, control systems, and power distribution.

Specifications and Features:

1. Number of pins: 3
2. Pitch: 5.0 mm
3. Current rating: 12A
4. Voltage rating: 250V
5. Wire range: 24-12 AWG
6. Housing material: PA66 (UL94V-0)
7. Contact material: Phosphor bronze, tin-plated
8. Operating temperature: -40°C to +105°C

Package Includes:

1 x Degson 3 Pin 5.0 mm Pitch Pluggable Terminal Block

Features:

1. High quality with imported materials.
2. Light and reliable
3. Low consumption with a thrust / weight ratio 24.
4. Maximum thrust 1100g
5. Recommended propeller: 12-13 inches.

Specifications:

1. Test Item: KV320
2. Motor Dimensions: Φ67  x 30.1mm
3. Lead: Enameled Wire 60mm
4. Shaft Diameter: 6mm
5. Idle Current(22V): 1.4A
6. Max. Power(180s): 936V
7. Weight (Incl.Cable): 180g
8. InternalResistance: 50m0
9. Configuration: 18N22P
10. Rated Vcltage(Lipo): 65
11. Peak Current(180s): 39A

Packages Includes:

1 x T Motor Antigravity MN6007II KV320