SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission IC SMD-8 Package

ULN2003APWR – High-Voltage High-Current Darlington Transistor Array IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x ULN2003APWR – High-Voltage High-Current Darlington Transistor Array IC SMD-16 Package

MCP2510-I/P CAN Controller Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP2510-I/P CAN Controller Interface IC DIP-18 Package

MCP42010 2-Channel Digital 10K Potentiometer with SPI Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP42010 2-Channel Digital 10K Potentiometer with SPI Interface IC SMD-8 Package

The MCP4821T-E/MS is a 1-channel 12-bit buffered voltage output Digital-to-analog Converter (DAC) that operates from a single 2.7 to 5.5V supply with an SPI compatible serial peripheral interface. The device has a high precision internal voltage reference. The user can configure the full-scale range of the device to be 2.048 or 4.096V by setting the gain selection option bit. The device can be operated in active or shutdown mode by setting a configuration register bit or using the SHDN pin. In shutdown mode, most of the internal circuits, including the output amplifier, are turned OFF for power savings, while the amplifier output (VOUT) stage is configured to present a known high resistance output load. The device includes double-buffered registers, allowing a   synchronous update of the DAC output using the LDAC pin. The device utilizes resistive string architecture with its inherent advantages of low DNL error, low ratiometric temperature coefficient, and fast settling time.

Applications:

1.  SetPoint or Offset Trimming
2.  Sensor Calibration
3. Precision Selectable Voltage Reference
4.  Portable Instrumentation (Battery-Powered)
5.  Calibration of Optical Communication Devices

Features:

1.  Rail-to-Rail Output
2.  SPI Interface with 20 MHz Clock Support
3.  Simultaneous Latching of the DAC Output with LDAC Pin
4.  Fast Settling Time of 4.5 µs
5.  Selectable Unity or 2x Gain Output
6. 2.048V Internal Voltage Reference

Specifications:

1. Analogue Supply Voltage: 2.7 V to 5.5 V
2. Digital Supply Voltage: 2.7 V to 5.5 V
3. Product Category: Digital to Analog Converters – DAC
4. Resolution: 12 bit
5. Number of Channels: 2 Channel
6. Settling Time: 4.5 us
7. Output Type: Voltage Buffered
8. Interface Type: 3-Wire, Microwire, SPI
9. Minimum Operating Temperature: – 40 C
10. Maximum Operating Temperature: + 125 C

Package Includes:

1 x MCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP

ADM485JNZ – 5V 5Mbps Half-Duplex EIA RS-485 Transceiver IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x ADM485JNZ – 5V 5Mbps Half-Duplex EIA RS-485 Transceiver IC DIP-8 Package