Features:

1. 4inch IPS screen, 480×800 hardware resolution.
2. Resistive touch control.
3. Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 Model B or Pi Zero, which requires an HDMI cable).
4. Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie).
5. Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
6. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
7. 3.5mm audio jack, supports HDMI audio output.
8. The backlight can be turned off to lower power consumption.

Package Includes:

1. 1 x 4 inch HDMI LCD
2. 1 x HDMI connector
3. 1 x HDMI to micro HDMI connector
4. 1 x Touch pen
5. 1 x RPi screws pack (4pcs)

7-inch QLED Integrated Display, 1024 × 600, Thin And Light Design. The 70H-1024600 series display, designed by Waveshare Team, is for customers who need a lightweight HDMI display. As it is thinner and lighter than any traditional HDMI display, users can do the second development by themselves easily.
For simplifying the display, we integrate the power supply, display, touch, and control signal as the 40PIN multi-functional header. Just need an FPC cable, you can lower the project cost with the thinnest display, and apply it in any embedded projects.

Useful link:

To use this, please follow this tutorial for Hardware and Software  setup.

Features:

1. 7-inch IPS/QLED screen, 1024 x 600 hardware resolution.
2. Capacitive touch, supports five-point touch (this function is only for the touch version).
3. COF thin and light structure, providing 40PIN interface one-line communication, integrated development is more convenient.

Package Includes:

1 x OPTIONS IPS/QLED Display

1 x FPC cable (~ 15cm)

1 x OPTIONS Development Accessories

3.5 inch HDMI Capacitive Touch IPS LCD Display (E), 640×480, Audio Jack. Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie ,Driver free for USB-C touch Config file is required for I2C touch Supports all versions of Raspberry Pi.Use with raspberry pie Set the touch interface selector switch on the back of the screen to “I2C”. Fix the Raspberry Pi to the screen through the copper posts, and pay attention to aligning the position of the pogo pins. Connect the HDMI port.

Connect the HDMI connector to the screen and the HDMI port of the Raspberry Pi. To use the display with the Raspberry Pi, this LCD can support Raspberry Pi OS / Ubuntu / Kali and Retropie systems, you need to configure the resolution manually, otherwise it will cause a display exception. When the LCD works on the PC version of the Windows system, there is no such problem.

Feature:

1. 3.5inch IPS screen, hardware resolution is 640 × 480
2. 5-point capacitive touch, tempered glass panel, hardness up to 6H
3. When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie
4. When used with Tinker Board 2, it supports Android / Debian
5. Ubuntu is supported when used with Jetson Nano
6. When used as a computer monitor, supports Windows 11/10/8.1/8/7
7. Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios
8. With 3.5mm audio and speaker interface, support HDMI audio output

Package Include:

1 X 3.5inch HDMI LCD

1 X HDMI Adapter

1 X HDMI Adapter

1 X HDMI cable

1 X USB-A to USB-C cable

1 X Screws pack

Grove – 16 x 2 LCD is a perfect I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. 16×2 means two lines and each line has 16 columns, 32 characters in total. With the help of Grove I2C connector, only 2 signal pins and 2 power pins are needed. You don’t even need to care about how to connect these pins. Just plug it into the I2C interface on Seeeduino or Arduino/Raspberry Pi+baseshield via the Grove cable. There won’t be complicated wiring, soldering, worrying about burning the LCD caused by the wrong current limiting resistor.

Features:

1. Display construction: 16 Characters * 2 Lines
2. Display mode: STN
3. On board MCU
4. I2C-bus interface
5. Support English and Japanese fonts

Specifications:

1. Model: 16 x 2 LCD
2. Voltage: 3.3V/5V
3. Interface: I2C
4. Backlight color: Red
5. Font color: Black
6. Dimensions: 8 x 4 x 1mm
7. Weight: 33g

Packages Includes:

1 x Seeed Studio Grove – 16 x 2 LCD (Black on Red)

The 70H-1024600 series display, designed by Waveshare Team, is for customers who need a lightweight HDMI display. As it is thinner and lighter than any traditional HDMI display, users can do the second development by themselves easily.
For simplifying the display, we integrate the power supply, display, touch, and control signal as the 40PIN multi-functional header. Just need an FPC cable, you can lower the project cost with the thinnest display, and apply it in any embedded projects.

Features:

1. Support Windows / Linux / Android Main Board Which Has HDMI Signal And USB Touch Signal
2. Provide Secondary Development Resources To Facilitate Integrated Design
3. Boost Simple Development For Embedding Engineering Applications Quickly

Package Includes:

1 x OPTIONS IPS/QLED Display

1 x FPC cable (~ 15cm)

1 x OPTIONS Development Accessories

Packages Includes:

1 x 4D System 5.0″, gen4 Primary Display with Capacitive Touch compatible with Raspberry Pi