This is a Brand New 1.14 inch LCD Display Module For Raspberry Pi Pico from Waveshare. With 65K RGB Colors, 240×135 Pixels, and SPI Interface.

Features:

1. 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
2. SPI interface requires minimal IO pins
3. 4x user buttons for easy interacting

Package Includes:

1 x Pico 1.14 Inch LCD Display

The 4DPi-35-II is a 3.5″ 480×320 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-35-II to function with the Raspberry Pi without the need for a mouse.

Communication between the 4DPi-35-II and the Raspberry Pi is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel.

The 4DPi-35-II is designed to work with the Raspbian Operating System running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It also supports the new PIXEL addition to Raspbian.

Powered directly off the Raspberry Pi, this 3.5″ Touch panel allows effortless connection, and a single download package will get you up and running with a few simple steps. Please refer to the Datasheet for detailed information.

Features:

1. Universal 3.5″Primary Display for the Raspberry Pi.
2. Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Zero, Zero W versions.
3. 480×320 QVGA Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.
4. Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
5. High Speed 48Mhz SPI connection to the Raspberry Pi, featuring SPI compression technology.
6. Powered directly off the Raspberry Pi, no external power supply is required.
7. Typical frame rate of 17FPS. Higher if image is able to be compressed by Kernel.
8. On/Off or PWM controlled backlight, selectable by on board jumper.
9. On-board EEPROM for Indentification (Revision 2.x HW only)
10. Module dimensions: 57 x 86 x 21mm (including corner plates). Weighing ~ 53g.
11. Display Viewing Area: 49 x 73.4mm
12. 4x corner plates with 2.6mm holes for mechanical mounting.
13. RoHS and CE Compliant.

Packages Includes:

1 x 4D System 3.5″ resolution Primary Display compatible with Raspberry PI

13.3inch IPS screen, 1920 x 1080 high resolution.Toughened glass cover. Supports Raspberry Pi and can also be used as a computer monitor.This LCD get power from two interfaces. One is the POWER port, you should connect an 12V/1A power adapter to this interface, the operating current of this interface is about 12V/0.6A. And the other one is the TOUCH interface.

You need to connect this interface to the USB interface of master, its operating current is about 5V/80mAThis product supports Windows 11/10/8.1/8/7 OS Connect 12/1A power adapter to the DC interface of LCD, after connecting the backlight will light.Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems on Raspberry Pi.

Features:

1. 13.3inch IPS screen,1920 x 1080 high resolution.
2. Toughened glass capacitive touch panel, 6H hardness.
3. When works with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
4. When working as a computer monitor, supports Windows 11/10/8.1/8/7, ten-points touch.
5. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
6. 3.5mm audio jack, supports HDMI audio output.
7. Embedded ferrite Hi-Fi speaker(no need for external speakers).
8. Also supports VGA input (specific cable is required and should be purchased separately).
9. 100 x 100mm spacing mounting holes (M4 screw hole) for mounting on the wall.
10. Comes with 60° tilt angle stand.

package include:

1 X Waveshare 13.3inch Capacitive Touch Screen LCD with Case

1.47 inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface. The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used.
The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format
The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster

Useful link:

To do the Hardware setup, please follow this tutorial.

To do the Software setup, please follow this tutorial.

Features:

8DP-CAPLCD is a mini universal capacitive touch screen with HD resolution and is compatible with most standard HDMI devices.
As it is thin and light with toughened glass capacitive touch panel, 8DP-CAPLCD is excellent in display and has a smooth multi-touch effect.
The baseboard comes with fixed nuts, which enables users to integrate it into an all-in-one project more conveniently.

Features:

1. 8-inch IPS screen with a hardware resolution of 1280 x 800.
2. 10-point capacitive touch, with tempered glass panel, hardness up to 6H.
3. Adopting optical bonding touch technology, the display effect is better.
4. Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
5. Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
6. Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
7. Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

Specifications:

1. Model: 8DP-CAPLCD
2. Input Voltage 4.75- 5.25 V
3. Input Current 750 800 TBD
4. Viewing Angle: 178
5. Resolution: 1280 x 800
6. Touch screen dimensions: 194.00 (H) × 119.00 (V) × 2 (D)
7. Display dimensions: 114.66 (H) × 184.16 (V) × 2.6 (D)
8. Display area: 107.64 (H) × 172.22 (V)
9. Pixel pitch: 0.13455 (H) × 0.13455 (V)
10. Color gamut: 62%
11. Maximum brightness: 400
12. Contrast: 1200:1
13. Backlight adjustment: OSD menu dimming
14. Refresh Rate: 60 Hz
15. Display port: Standard HDMI port
16. Power port: 5V Type-C power supply
17. Power Consumption: 4

Package Includes:

1 x  Waveshare 8inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface

RP2040 MCU Board, With 1.28inch Round LCD, Accelerometer And Gyroscope Sensor. RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Tiny size with onboard 1.28inch LCD round display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting all GPIO and Debug pins, which makes it easy for you to develop and integrate it into products quickly.

Features:

1. RP2040 MCU chip designed by Raspberry Pi in the United Kingdom
2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
3. 264KB of SRAM, and 2MB of onboard Flash memory
4. Type-C connector, keeps it up to date, easier to use
5. Onboard 1.28-inch 240 x 240 resolution, 65K RGB IPS LCD display for clear color pictures
6. Lithium battery recharge/discharge header, suitable for mobile devices

Specifications:

1. Controller: GC9A01A
2. Resolution: 240 (H) RGB x 240(V)
3. Communication interface: SPI
4. Display Size: Φ32.4mm
5. Display Panel: IPS
6. Pixel Size: 0.135 (H) x 0.135 (V) mm
7. Sensor: QMI8658C
8. Accelerometer Resolution: 16 bits
9. Measurement Range (optional): ±2, ±4, ±8, ±16g
10. Gyroscope Resolution: 16 bits
11. Measurement Range (optional): ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec

Package Includes:

1 x RP2040 MCU Board, With 1.28inch Round LCD,