Waveshare XNUCLEO-F103RB, Improved STM32 NUCLEO Board

1. Compatible with NUCLEO-F103RB, onboard Cortex-M3 microcontroller STM32F103RBT6
2. Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
3. ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
4. Supports mbed, build prototype quickly by mbed SDK and online tools
5. Comprehensive free software HAL library including a variety of software examples
6. Comes with a separated ST-LINK/V2 module

What’s on the XNUCLEO-F103RB:

1. STM32F103RBT6
   
   • Core : ARM® 32-bit Cortex™-M3
   • Operating frequency : 72MHz
   • Operating voltage : 2.0V-3.6V
   • Package : LQFP64
   • Memories : 128kB Flash, 20kB SRAM
   • Interfaces : 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB
   • AD/DA : 2 x AD (12 bit, 16 channels)
2. SPX3819M5 : 3.3V voltage regulator
3. AMS1117-5.0 : 5.0V voltage regulator
4. CP2102 : USB to UART convertor
5. Arduino connector : for connecting Arduino shields
6. ICSP interface : Arduino ICSP
7. USB TO UART : for debugging
8. USB connector : USB communication interface
9. SWD interface : for programming and debugging
10. ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
11. 6-12V DC input
12. User button
13. Reset button
14. Power indicator
15. User LED
16. 500mA fast self-recovery fuse
17. Serial port Rx/Tx indicator
18. 8MHz crystal
19. 32.768KHz crystal
20. ADC/I2C selection jumper
    
    • short A and B : Arduino A4, A5 is used as I2C
    • short B and C : Arduino A4, A5 is used as ADC
21. UART selection jumper
22. MCU current test jumper : for low power tests
23. Power selection jumper
    
    • short 5V and U5V : powered from USB connection
    • short 5V and E5V : powered from external power supply
24. USB enable jumper
    
    • short the jumper to enable
    • open the jumper to disable
25. User button jumper
    
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
26. User LED jumper
    
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires

Package Includes:

1 x Waveshare XNUCLEO-F103RB, Improved STM32 NUCLEO Board

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for the expansion of STM32 Nucleo boards.
The M24LR04E-R is an NFC Type V/RFID tag IC with a dual-interface 4 Kbit Electrically Erasable Programmable Read-Only Memory (EEPROM) that also features an I2C interface. The EEPROM is organized as 512 x 8-bit in the I2C mode and as 128 x 32-bit in the RF mode. It can be operated either from an external power supply or directly powered by the received carrier electromagnetic field

Note:  For more technical details go through  Datasheet in the attachment section

Features:

1. STM32 expansion board based on the M24LR04E-RMN6T/2 Dynamic NFC/RFID tag
2.  Up to 4 Kbit memory with NDEF support
3.  30 mm x 30 mm 13.56 MHz double-layer inductive antenna etched on the PCB
4. Compatible with STM32 Nucleo boards
5.  Equipped with Arduino™ UNO R3 connector
6.  Self-powered or powered through the Arduino™ UNO R3 connectors

Package Includes:

1 x STMicroelectronics Expansion Board, M24LR Dynamic NFC/RFID Tag IC, For STM32 Nucleo

The X-NUCLEO-EEPRMA2 expansion board is designed for M24xx I²C and M95xx SPI EEPROM for data reading and writing. The expansion board acts as an external storage device that can be used to store data such as manufacturing traceability, calibration, user settings, error flags, data logs and monitoring data to make applications more flexible and accurate. The X-NUCLEO-EEPRMA2 expansion board is compatible with the Arduino UNO R3 connector pin assignment and can be easily plugged to any STM32 Nucleo development board. You can mount the ST morpho connectors if required

Features:

1. Easy portability across different MCU families
2.  Equipped with Arduino™ UNO R3 connector
3.  Compatible with STM32 Nucleo boards
4.  Free comprehensive development firmware library and sample implementation
   available when the X-NUCLEO-EEPRMA2 expansion board is plugged on top of
   a NUCLEO-F401RE or NUCLEO-L053R8 development board
5.  Developer can choose and solder an EEPROM to be tested using the evaluation
   software provided

Package Includes:

1 x STMICROELECTRONICS I2C/SPI EEPROM MEMORY EXPANSION BOARD

The NanoPi NE03 is a newly released super tiny ARM board by FriendlyElec. It uses Rockchip’ s 64-bit quad-core Soc RK3328 (ARM Cortex-A53).

It has 1GB/2GB 32-bit DDR4 RAM. A UbuntuCore and Friendlywrt image files are ready for it.It has one Gbps Ethernet with a unique MAC address,one USB 3.0 Type A port,two 2.54mm USB 2.0 pinheaders,one MicroSD card slot and various GPIO pins.

These features make it especially suitable for applications that require high data throughput , speedy data transmission and high performance. Hobbyists and makers will just love it.

Features:

1. Light weight
2. Easy to use
3. Plug and play device
4. Low power consumption
5. Compact design

Packages Includes:

1 x Neo3 LTS

ZGM230S Z-Wave SiP module radio board (+14dBm) plugs into the main board of the Z-wave 800 Pro kit. This radio board also supports development of Z-wave mesh and Z-wave long range (Z-Wave LR) applications. Used in conjunction with the Z-wave software development kit, distributed with simplicity studio, developers will have all the tools needed to start developing their project.

Note: For more technical details go through Datasheet in the attachment section 

Features:

1. Easy to use
2. on-board J-Link debugger with a Packet Trace Interface and a virtual COM port
3. The mainboard also contains sensors and peripherals for easy demonstration
4. The board features an SMA connector for RF connection or a PCB antenna that can be selected by moving a 0 Ω resistor

Package Includes:

1 x SILICON LABS SIP Module Radio Board, Z-Wave, ZGM230S, ARM, Cortex-M33, BRD4205B Radio Board

The STMicroelectronics Discovery Kit is a highly advanced and versatile solution for developing and testing microcontroller-based applications. The kit features the STM32F769NI MCU, which provides exceptional performance and features, including a high-speed Cortex-M7 core and advanced peripherals. The kit also includes an on-board ST-LINK/V2-1, which facilitates easy debugging and programming of the MCU. The 4″ Capacitive Touch LCD Display offers a high-resolution and responsive touch interface, making it ideal for creating user-friendly interfaces. Whether you are an experienced engineer or a hobbyist, the STMicroelectronics Discovery Kit provides a powerful and comprehensive platform for developing cutting-edge applications.

Note: For more technical details go through Datasheet in the attachment section 

Features:

1. WIFI or Ext-EEP daughterboard connector
2. USB OTG HS with Micro-AB connector, SAI audio codec
3. Ethernet connector compliant with IEEE-802.3-2002
4. 5 power supply options, ST-LINK/V2-1, USB HS connector, 5V from RJ45 (power over Ethernet)
5. Power over Ethernet based on IEEE 802.3af (powered device, 48V to 5V, 3W)
6. 5V from Arduino or external connector, USB charger
7. Power supply output for external applications is 3.3V or 5V, Arduino Uno V3 connectors
8. Compatible with Windows OS (XP, 7, 8) or Linux 64-bit or OS X
9. Supports Keil, IAR, and GCC-based IDEs (free AC6: SW4STM32, Atollic TrueSTUDIO) development tools

Package Includes:

1 x STMICROELECTRONICS Discovery Kit, STM32F769NI MCU, On-Board ST-LINK/V2-1, 4″ Capacitive Touch LCD Display