The world’s first FC board is compatible with the Silverware firmware. This is the most simple and affordable method to try whoop FPV racing hobby. Supports level mode and acro mode. Also, it has the ability to change settings for custom builds or to adapt to personal preferences by stick gestures. Designed to work with current Tiny Whoop or Blade Inductrix frames built-in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module.

Features:

1.  It is designed to work with current Tiny Whoop or Blade Inductrix frames.
2.  It is compatible with almost all radio transmitter

Package Includes:

1 x WHOOP LITE flight controller

4 x 2P x 1.25MM socket

1 x 2P x 2.0MM plug line

4 x M1.2 x 4mm screws

4 x shock-absorbing balls

This product is a combo kit of 1 Flight  controller & 1 ESC which are highly efficient to work in drones, we brought this combo of flight controller & ESC  in chipper price than market price, This  high performance Flight controller is able to handle your Drone &  model plane controller with 95% accuracy.

ESC (Electronic Speed Controller) comes in the kit is compatible with flight controller they work together very efficiently.

The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand.

The MPU6500 is the most widely used IMU sensor, and it’s used in nearly all of the greatest flight controllers. The reason for this is that it has a high vibration tolerance and can sample the gyro at 8kHz over an SPI interface.

Note: Product may vary from images in terms of Color and Design

Features:

1. This is combo kit of Flight controller & ESC
2. High performance & efficient flight controller & ESC
3. Light weight, Easy to connect
4. Compact in size
5. Flight controller comes with ARM processor
6. ESC is build to give best performance

Specifications:

Product name: 35A BLheli_S 2-6S 4 in 1 ESC

1. Model: REV35
2. Con. Current: 35A
3. Peak- Current(10s): 40A
4. LBEC: NO
5. SBEC: NO
6. Lipo: 3-6S
7. Programming: YES
8. Weight: 13g
9. Size(PCB): 36 x 36mm
10. Hole size: 30.5 x 30.5mm
11. BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmware
12. Supports 3-6S Lipo input
13. 4PWM input
14. Built-in Current sensor
15. Only 36x36mm, mount holes 30.5×30.5mm M3
16. No External capacitors needed
17. Dshot600 ready(Default) Support PWM/ONESHOT/MULTISHOT/DSHOT

Packages Include:

1 x 35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD

The Pixhawk 6C with M8N GPS is the latest update to the successful family of Pixhawk flight controllers, based on the Pixhawk FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot pre-installed. Inside the Pixhawk 6C, you can find an STMicroelectronics based STM32H743, paired with sensor technology from Bosch & InvenSense, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The PM02 Power Module is a simple way of providing your autopilot flight controller with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.2V and a maximum of 3A from up to a 12S LiPo battery. The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection. The Power Module is designed to power autopilot flight controller, a RC receiver and APM accessories (GPS, radio). It is not designed to power servos. Use your aircraft’s own ESC/BEC for that. The GH terminal is also compatible with Pix32, Pixhawk4, Pixhawk4 mini, Pix32v5 and Durandal.

Features:

1. The Power Module comes completely assembled with XT60 connectors
2. New cost-effective design with low-profile form factor
3. Redundant inertial measurement unit (IMU) from Bosch & InvenSense
4. Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
5. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
6. Lightweight & low power consumption

Packages Includes:

1 x Pixhawk 6C Flight Controller Module

1 x PM02 V3 12S Power Module

1 x Cable Set

1 x M8N GPS

The Cube Orange Standard Set + ADS-B  flight controller comes with an H7 processor, features a 1,090 MHz ADS-B receiver from Avionic, automatically avoids aircraft, and Is integrated into the new ADS-B carrier board!  Through the parameter setting, the autopilot can optionally set up the cube to allow the vehicle to automatically avoid an aircraft that is detected in an exclusion zone set by the pilot.

Features:

1. Built-in IMU Heating system, allowing flights at extreme temperatures (below freezing)
2. Robust DF17 Interface connectors give enhanced drop and shock resistance
3. Air-frames: VTOL, Plane, Multi-copter, Traditional Heli, Rover, Boat, Sub, General Robotics

The Cube Orange:

1. Cube Orange targets education, amateur drone lovers, and professionals with cost-effective flight control hardware.
2. Includes new generation of more powerful H7 processor, with stronger performance, faster processing, and increased security with built-in
3. triple-redundant sensors, temperature control shock absorption IMU.
4. With the help of flight software, Cube Orange can completely fly any remotely controlled aircraft, helicopter, or multi-rotor vehicle and turn it into a more professional UAV platform.

ADS-B Carrier Board

1. A standard carrier board with an integrated 1090MHz ADS-B receiver allows the software to receive information about the location of manned aircraft in the area.
2. Receives information such as position, altitude, speed, etc, which can all be viewed in Mission Planner.
3. Through settings, you can optionally set up your cube to allow the vehicle to automatically avoid aircraft that is within an exclusion zone set by you

Packages Includes:

1 x Hex Pixhawk 2.1 cube PX4 PIX 32 Bit Flight Controller Autopilot

Box Contain:

1 x The Cube Orange – the brains behind the operation.
1 x A standard carrier board with ADS-B
1 x Power Brick (two power bricks can be used for redundant power.)
1 x Cable set that allows you to connect to your old Telemetry module, GPS, and sensors

Features:

1. Built-in barometer for accurate height calculation
2. SD Card slot can support up to 4GB Blackbox data
3. Dedicated DJI Air Unit connector for a quick digital build
4.  9V 2A + 5V 2A individual BECs
5.  4 x UARTs for your receiver + VTX + camera + GPS.
6.  Power your GPS with a USB cable – no battery needed

NOTE: For more technical details go through Datasheet in the attachment sections

Package Includes:

1 x SpeedyBee F405 V3 Flight Controller

1 x Speedy Bee BLS 50A 4 IN 1 ESC

1 x 35V 1500 uF low ESR Capacitor

1 x M3 nylon nut

5 x M3 Silicone O ring

5 x M3*8mm Silicone grommets(for FC)

5 x M3*8.1mm Silicone grommets(for FC)

1 x SH 1.0mm 15 mm length 8 pin capable( for FC-ESC connection)

5 x M3*30mm inner hexagon screws

1 x DJI 6 pin capable (80mm)

1 x XT60 Power cable(70mm)

The FMS Reflex system is programmed specifically for the aircraft it is connected to. No further programming is needed. The user only needs to connect their receiver to the gyro and set up the aircraft normally.

Reflex V2 can be reprogrammed easily with different model files via a simple software-allowing pilots to use the same flight control unit as they progress to different aircraft. Flying is simple when you have your very own “co-pilot”- the Reflex V2!

Features: 

1. 3 flight modes are available: Stabilized, Optimized or off. This is controlled with a 2 or 3 position switch on the transmitter. When assigned to a 2 position switch, the Reflex system switches between stabilized and optimized modes.
2. Stabilized Mode – Designed for beginners, Reflex will rapidly level the aircraft from any attitude when this mode is activated. Stabilized mode combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released- giving pilots absolute peace of mind.
3. OFF – Turns off all gyro functionality, the aircraft is flown completely manually when the gyro is off.
4. Optimized Mode – Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets- from gusts to crosswinds.

Specification:

1. Suitable For FMS 1.2M Ranger Plane.
2. Utilizes a high-speed 32-bit ARM processor onboard.
3. 3 axis gyro and 3 axes accelerometer.
4. 3 flight modes are available: Stabilized, Optimized, or off.
5. Automatically recognizes SBUS/PPM/PWM systems, compatible with all radio systems with 4 channels or above.
6. Easy operation.

Package Includes :

1 x FMS RC Airplane Gyro Reflex Flight Control System