Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case

This is an E-Ink display for Raspberry Pi, 2.13inch, 250×122 resolution, with an embedded controller, communicating via SPI interface, supports the black, and white color display.

There is no backlight so it can keep displaying the last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight,  Basically, power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc… SPI interface can be used.

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Features:

1. 2.13″ capacitive touch e-Paper display, 5-point touch, 250×122 pixels
2. Supports waken up by user-defined gesture
3. No backlight keeps displaying last content for a long time even when power down
4. Ultra-low power consumption, basically power is only required for refreshing
5. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
6. Comes with development resources and manual (examples for Raspberry Pi)

Specifications:

1. Operating Voltage: 3.3V
2. Gray Scale: 2
3. Interface: 3-wire SPI, 4-wire
4. SPI Partial Refresh Time: 0.3s
5. Full Refresh Time: 2s
6. Refresh Power:  26.4mW(Typ.)
7. Dot Pitch : 0.194 x0.194mm
8. Standby Current: <0.01uA (almost none)
9. Viewing  Angle: >170°
10. Display Color: black, white
11. Touch Point: 5 (max)

Package Includes:

1 x Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case

welcome

welcome