- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- ATmega328P MCU with Optiboot (UNO) bootloader
- Built-in resettable PTC fuse 5V/2A
- CH340G Serial-to-USB converter
Add to Wishlist
Add to Wishlist
- Input voltage: DC12-24V
- Amp Chip: TPA3116D2
- Output impedance:4~8 ohm Speaker
- Current: ≥3A
- Output power: 80W*2
- Adopt a TPA3116D2 high-performance power amplifier chip.
- With total volume, subwoofer volume, and stereo volume control knobs.
Add to Wishlist
Add to Wishlist
- Core Processor: AVR
- Type: Development
- Interconnect System: Trinket
- Mounting Type: Fixed
- Suggested Programming Environment: Arduino
- Type:MCU 8-Bit
- Utilized IC / Part:ATtiny85
Add to Wishlist
Add to Wishlist
- Kit Name: Feather 32u4 Bluefruit LE
- Technology: MCU
- Processor: ATmega32u4
- Compatible:3.7 lipo battery
Add to Wishlist
Add to Wishlist
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Add to Wishlist
Add to Wishlist
- RP2040 SoCARM Cortex M0+ running at up to 133Mhz
- SRAM264kB
- Flash Storage8MB of QSPI
- USB PortMicro USB
Add to Wishlist
Add to Wishlist
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
Add to Wishlist
Add to Wishlist
- ATSAME51 32-bit Cortex M4 core with 120 MH
- 32-bit, 3.3 V logic and power
- 512 KB Flash, 192 KB RAM
- 2 MB SPI FLASH chip
- 3.3V regulator with 500mA peak current output
- USB Type-C
Add to Wishlist
Add to Wishlist
- INA219B chip
- 3.3Vvoltage regulation
- +26VDC peak current
Add to Wishlist
Add to Wishlist
- Board Type:Evaluation Platform
- Contents:Board(s)
- Core Processor:ARM® Cortex®-M0
- Mounting Type:Fixed
- Platform:Arduino
- Type:MPU
- Utilized IC / Part:ATSAMD21E18
Add to Wishlist
Add to Wishlist
- Input: 5V(DC)
- Operating current (without signal output state): less than 15 mA
- Operating current (with signal output state): less than 40 mA
- Chip: KT403A
- Chip LDO output voltage: 3.3 V
- Chip output current: 100 mA(at Max.)
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
Add to Wishlist
Add to Wishlist
- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
Add to Wishlist
Add to Wishlist
- Brand: Seeed Studio
- Supply voltage: 3.3V +-0.2V
- Sound Pressure Level: 140 dB SPL
- Sensitivity: -26(dB, dBFS @1kHz 1Pa)
- 6 MEMS microphones: MSM261S4030H0
- Supply current: >750mA(Full brightness)
- Range of working temperature: -30 ~ 85C
Add to Wishlist
Add to Wishlist
- Signal Type: Analog signal
- Power Supply: 3.3V/5V
- Directivity: All-round
- Sensitivity: -42dB
- S/N Ratio: 59dBA
- Frequency Range: 100Hz~8KHz
Add to Wishlist
Add to Wishlist
- Work voltage:DC 12V-28V
- IC:TPA3118D2
- Power interface:DC 5.5*2.1mm socket
- Audio channel:2CH
- Output power:45W*2
- Input current:>3A
- Output impedance:4ohm-8ohm
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000