- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
₹0.00
- Output Voltage: 12.6 VDC
- Balance connector: JST
- Discharge connector: Nylon Female T Connector
- High energy density
- Inbuilt (BMS) battery protection circuit
- Charge connector: DC 5.5mm Female connector
- Discharge connector: Nylon Female T Connector
- Maximum Output Voltage: 12.6 VDC
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
- Output Voltage: 12.6 VDC
- Discharge connector: Nylon Female T Connector
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
- Dimensions: 7 x 6 x 3mm
- Weight: 200g
- Charge connector: DC 5.5mm Female connector
- Discharge connector: Nylon Female T Connector
- Maximum Output Voltage: 12.6 VDC
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
Modify your 3D printer to print fine details or large parts with E3D’s V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Purse 3D printers.
- Nominal Capacity (mAh): 2200
- Charging Connector: JST-XH connector
- Discharging Connector: Nylon Female T Connector
- Nominal Voltage (v): 11.1
- Max Charging Voltage (v): 12.6
- Inbuilt (BMS) battery protection circuit
- Maximum Output Voltage: 12.6 VDC
- Connector: DC Jack Male & Female
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
This battery pack is made of best quality tested ICR 18650 2000mAh 20C Lithium-Ion Batteries and BMS circuit. It is very small in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries. With the inbuilt Charge protection circuit, the battery pack can be directly charged with the DC power Adapter, so need not use the specialized battery chargers and worry about overcharging.
- Filament Support: 1.75mm
- Material: High-quality brass
- Color: Brass color
- Nozzle Accuracy: 0.6mm
- Screw outer diameter: M6
- 3D Printer nozzle cleaning needle with a diameter of 0.4mm.
- 1 set includes 5 pieces of 0.4mm size needles.
- For all 0.4mm nozzle (RepRap, Ultimaker, Makerbot, Flashforge, and more).
- Filament Support: 1.75mm
- Material: High-quality brass
- Color: Brass color
- Nozzle Accuracy: 0.8mm
- Screw outer diameter: M6
- Length: 4cm
- Head Diameter: 0.30mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 1mm (Approx.)
- Color: White
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
- Length: 4cm
- Head Diameter: 0.8mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 0.8mm (Approx.)
- Color: Purpal
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
- Model No: ORANGE 18650
- Capacity (mAh): 2200mAh
- Cell: 3S1P
- Voltage: 11.1V
- Connector: T Female
- Weight: 211g
- Model No: ORANGE 18650
- Capacity (mAh): 4500mAh
- Weight: 480g
- Voltage: 11.1V
- Connector: XT60 Female
- Cell: 3S3P
- Model No: ORANGE 18650
- Weight: 190g
- Voltage: 11.1V
- Connector: DC Jack Male & Female
- Cell: 3S1P
- Good Temperature Control
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000