- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
3
3 items
₹8,015.00
Subtotal: ₹8,015.00
Your order qualifies for free shipping!
3
Subtotal: ₹8,015.00
Your order qualifies for free shipping!
- Input Voltage (V): 7 ~ 24
- Max. Continuous Current: 1A
- Peak Motor Current: 2A@10s
- PWM Frequency: 20Khz
- On-Board DC motor Driver L298N.
- 5 mm standard DC plug-in jack for Input supply
Add to Wishlist
Add to Wishlist
- Operating Voltage: 6-30 VDC
- Operating Current: up to 8A
- Material: ABS
- Frequency:16 Khz
- Dimension:80x40x25 mm
Add to Wishlist
Add to Wishlist
- Nominal Voltage:6~30 V
- continuous Current:50A
- peak Current: 100A
Add to Wishlist
Add to Wishlist
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Add to Wishlist
Add to Wishlist
- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
- 1GB RAM.
- BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board.
- 300 Base Ethernet.
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
- Brand: HobbyFly
- Name: 1S Lipo Battery parallel Charging board
- Battery type: LiHv/Lipo/liion/life Battery
- Connector type: GNB27, JST-PH2.0mm, JST 1.25mm Output port
Add to Wishlist
Add to Wishlist
- Drive plate type: JYQD_V6.3E2
- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
Kit Includes:
- The Raspberry Pi4 Model B with 8GB RAM
- USB type-C 15.3W power supply (White)
- Raspberry Pi 4 case (Black-Grey or Red-White)
- Micro HDMI to standard HDMI cable (Black or White -1 Meter)
- Sandisk Micro SD 16GB Class 10 Memory Card
Add to Wishlist
Add to Wishlist
- Charge Cell: 2~6S.
- Connector: (XT60-Male) with Xt60 Female
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use a safety fuse (50A) to protect the circuit.
Add to Wishlist
Add to Wishlist
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
Add to Wishlist
Add to Wishlist
- XT30 XT60 XT90 JST T Connector Lipo Parallel Charging Board.
- Supports 2-6S lithium battery charging and 2-6s extension parallel charging board
- Charge cable:14awg silicon cable which can stand with heavy current
- Multi-function charging board with XT30, XT60, XT90,T and JST plug in one board to meet almost kinds of batteries
- 4.0mm banana plug and XT60 plug,Compatible for Imax B6/B6AC ISDT HOTA etc chargers
Add to Wishlist
Add to Wishlist
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- ABS plastic official case (Red-white)
Add to Wishlist
Add to Wishlist
- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
Add to Wishlist
Add to Wishlist
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000