- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Maximum Voltage :600 V
- Display (LCD): 6000 counts, updates 3/sec
- Battery Type: 2 AAA, NEDA 24A, IEC LR03
- Battery Life:200 hours minimum
- Operating : 0 °C to 40 °C
- Measures Voltage, resistance, continuity, capacitance
Add to Wishlist
Add to Wishlist
- Maximum Voltage:600 V
- Display :Digital- 6,000 counts, updates 4 per second
- Battery Type: 9-volt Alkaline, IEC 6LR61
- Battery life: 400 hours typical, without backlight
- Operating temperature:-10℃ to + 50℃
- Easy one-handed operation of the meter
- Min/Max/Average to record signal fluctuations
Add to Wishlist
Add to Wishlist
- 600 V Cat III safety rating
- 50% bigger display with bright white backlight
- Voltage, resistance, continuity, capacitance
- Input terminal for ac and dc current measurements to 10 A current
- Diode test, data hold
Add to Wishlist
Add to Wishlist
- 600 V Cat III safety rating
- 50% bigger display with bright white backlight
- Over-voltage indicator
- Frequency and temperature measurement
Add to Wishlist
Add to Wishlist
- Maximum Voltage:500V
- Battery Type:9 V battery
- Display Dimension:48×16
- Dimension:130×73.5×35 mm
- Weight:135 gm
Add to Wishlist
Add to Wishlist
- Maximum Voltage:600 V
- Continous Current:10 A
- Resistance:200Mohm
- Capacitance:2 mF
Add to Wishlist
Add to Wishlist
- Maximum Voltage:1000 V
- Battery Type:9v Battery
- Life Cycle:200 hrs minimum
- Dimension:145x70x35 mm
Add to Wishlist
Add to Wishlist
- Processor: ARM Cortex-M4 CPU 5.0 Stack
- Input Voltage:3.3V@500mA
- Connector Type:2 pole JST-Ph
- Interface: I2C
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- ATmega328@16MHz
- Bluetooth Low Energy (BT 4.0)
- Micro USB port
- Super Compact Size
- Support Bluetooth HID and ibeacon
Add to Wishlist
Add to Wishlist
- 2.4 GHz Transmit and Receive.
- Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
- Standard Cortex Debug Connector (10-pin 50-mil JTAG)
- In-System Programming (ISP) Serial Connector
- Expansion connector intended for inter-Ubertooth communication or other future uses.
- Six Indicator LEDs
Add to Wishlist
Add to Wishlist
BLE chip: TICC2540
Working channel: 2.4G
Interface: Micro-USB
Input voltage: Micro-USB power supply, Vin6~12V, 5V
Microprocessor: ATmega328P-MU QFN32
Bootloader: Latest arduino1.8.8
Pin: two rows 2.54mm-15Pin
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Nrf24L01+ 2.4G wireless
- Architecture AVR
- Operating Voltage 5 V
- Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock Speed: 16 MHz
- Analog I/O: 8 Pins
- EEPROM 1 KB
- DC Current per I/O Pins: 40 mA (I/O Pins)
- Input Voltage: 7-12 V
- Digital I/O: 22 Pins
- PWM Output: 6
- Power Consumption: 19 m
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- BT Version Bluetooth Specification V4.0 BLE
- Supply Power 3.3v – 5v
- Working frequency 2.4GHz ISM band
- Modulation method GFSK(Gaussian Frequency Shift Keying)
- Speed Asynchronous: 6K Bytes, Synchronous: 6K Bytes
- Size 40cm x 20cm
Add to Wishlist
Add to Wishlist
- Working Frequency: 2.4G
- Communication Interface: UA pin 3.3V TTL level
- Input Voltage: 3.2 ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level: 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
Add to Wishlist
Add to Wishlist
- Supply voltage: 3.2 – 6V DC
- Signal voltage: 3.2 – 6V DC
- Range: ~10m (in open air)
- LED indication present (indicates status of Bluetooth connection)
- Interface: UART (RX and TX)
- Baud rate in standard modes: 9600 (adjustable)
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000