- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
₹0.00
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
- Microcontroller Chip: RP2040
- Flash Memory:16 MB
- SRAM:264 KB
- Weight:7 gm
- Microcontroller chip: Arm® Cortex®-M4F Microcontroller
- Power Supply: Regulated 3.3 V
- Clock Frequency:80 MHz
- SRAM:512 KB
- Weight:6 gm
- Input Voltage (V):5V
- Maximum Voltage(V):6V
- USB Type:USB 2.0
- Flash Memory:32 KB
- Dimension:35x17x4 mm
- Weight:3 gm
- Compatible With: BBC Micro: Bi
- Accessory Type: Extension Board
- 5V 1A supply for the greater driving force
- 3.3V and 5V interface
- Support 3V5V sensor module
- Micro: bit all pins lead
- 3.5mm audio connector
- Builtin buzzer (switch switching)
- 5V 1A self-recovery fus
- Interface voltage: 5V
- LED light: 5V power indicator
- Support software: Makecode / kittenblock
- 4P pin header, 5VI2C DuPont line module interface
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
These sensors are of the latest generation and measure:
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
To help you build projects and store the data collected locally, this shield has a slot for a microSD card
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
- Model: ED-CM4IO-1108-C
- 2x full-size HDMI 2.0 connectors
- 2x USB 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- MicroSD card socket for compute module 4 Lite variants
- PCIe Gen 2 x1 socket
- Standard fan connector
- Real-time clock with battery socket
- Model: ED-CM4IO-1208-C
- 2x full-size HDMI 2.0 connectors
- 2x USB 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- MicroSD card socket for compute module 4 Lite variants
- PCIe Gen 2 x1 socket
- Standard fan connector
- Real-time clock with battery socket
- Model: ED-CM4IO-1408-C
- 2x full-size HDMI 2.0 connectors
- 2x USB 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- MicroSD card socket for compute module 4 Lite variants
- PCIe Gen 2 x1 socket
- Standard fan connector
- Real-time clock with battery socket
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000