- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
₹0.00
- Input Voltage (V): 7 ~ 24
- Max. Continuous Current: 1A
- Peak Motor Current: 2A@10s
- PWM Frequency: 20Khz
- On-Board DC motor Driver L298N.
- 5 mm standard DC plug-in jack for Input supply
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
- Operating Voltage: 6-30 VDC
- Operating Current: up to 8A
- Material: ABS
- Frequency:16 Khz
- Dimension:80x40x25 mm
- Nominal Voltage:6~30 V
- continuous Current:50A
- peak Current: 100A
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
- Drive plate type: JYQD_V6.3E2
- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
These sensors are of the latest generation and measure:
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
To help you build projects and store the data collected locally, this shield has a slot for a microSD card
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000