2D Codes Scanner Module, Supports 4mil High-Density Barcode Scanning, Barcode/QR Code Reader

The Barcode Scanner Module (B) is a Barcode/QR codes scanner module, by using the intelligent image recognition algorithm, it can decode the 1D or 2D code on paper or screen fastly and accurately. Supports a variety of barcode formats and 4mil high-density barcode scanning. Onboard USB and UART interfaces, can be directly plugged into a computer, or be easily integrated into kinds of embedded devices.

Decoding code types:

1. Aztec
2. BPO
3. Codabar
4. Codablock
5. Code 11
6. Code 39/Code 93
7. UPC/EAN
8. Code 128/EAN 128
9. DataMatrix
10. EAN.UCC Composite
11. Interleaved 2 of 5
12. Matrix 2 of 5
13. MaxiCode
14. MicroPDF417
15. MSI Code
16. PDF417
17. Planet
18. Plessey Code
19. QR Code
20. RSS
21. Standard 2 of 5
22. Telepen
23. TLC 39

Quick Test:

The default factory setting of the Barcode Scanner Module (B) is USB keyboard mode and key scanning.

1. Connect the USB interface of the device to the computer via the USB cable.
2. Open a document editor (word or notebook) and click on the document to keep typing.
3. Press the button to turn on scanning and scan any barcode. (note that the relevant setting code in the setting manual will not output results and cannot be used for testing.)
4. Normally, the scan result will be printed automatically, and the buzzer will sound to indicate that the decoding is successful.

For more setting functions, please check the setup manually in the documentation.

Features:

1. Plug and Play Device
2. Small And Compact Size
3. Supports Multiple code formats
4. Powerful and Fast Scanning
5. High Accuracy for 1D and 2D codes

Specifications:

1. Resolution:  640 × 480
2. Scan Angels: Pitch ±65°, Skew ±65°, Roll 360°
3. Scan Mode:  Sensing, Continuous, Manual (Default)
4. Accuracy: ≥4mil
5. Communication Interface: USB Virtual Port, Uart Port
6. Light Source White (Lighting) + Red (Aiming), Both Are Visible Light
7. Power Supply: 5v / 3.3v
8. Current
   1. Operating: 262mA
   2. Standby: 75mA
9. Boot: 108mA
10. Temperature Operating: -20 ~ +60°c
11. Dimensions: 29 x 61 mm

Package Includes:

1 x Waveshare 2D Codes Scanner Module

1 x Micro-USB Male to USB-A Male Cable- 80 cm

1 x 4 pin UART cable

Buy the Cheap USB Endoscope 3in1 Borescope 3.9mm Ultra Thin Waterproof Inspection Snake Camera with LED Light. This Bore camera Comes with a tiny 2 Megapixel HD camera surrounded by 6 LED Lights enclosed in a waterproof 30mm steel tip followed by a 420 mm long spring cable.

This is a miniature industrial camera that is an extension of our eyes. The main application areas are pipeline inspection and dredging, outdoor inspection, animal and plant monitoring, automotive air conditioning maintenance, home search, and so on. More application areas are waiting for your discovery.

This endoscope camera comes with 3 input options which are USB-A, USB type-C, and Micro-USB for power up and camera signal out. It can use with an Android device or Windows PC with an Android app and Windows Application available on Playstore as well as on the INSKAM website. (find the links in attachments)

Compatible With Phones
1. Please make sure your Android phone supports OTG functionality.
2. Not support iOS phone and iPad.
3. Support OPPO R series mobile phones, expect R series mobile phones are not supported
4. Support Samsung Galaxy Note 2 to 20
5. Below S4 and galaxy A5, SCH-P729 are not supported
6. Support Xiaomi MI3 above, Xiaomi Tablet, Xiaomi Redmi 2 above
7. Below MI3 and redmi 2 are not supported
8. Support other brand phones: Vivo MAXL, Meizu X4 or above, Sony Z1 and above, ZTE Red Bull V5

Features and Specifications:

1. 3 in 1 interface: USB, Micro USB, Type-C
2. Light source: 6pcs adjustable LED light
3. Support system:windows7 or above
4. Supports all latest 4G and above smartphones
5. Small and portable, convenient and reliable to use, long service life.

Package Includes:

1 x INSKAM USB Endoscope 3in1 Borescope 3.9mm Ultra-thin Waterproof Inspection Snake Camera with LED Light

1 x User Manual

The OpenMV Cam is a small, low-power, microcontroller board that allows you to easily implement applications using machine vision in the real world. You program the OpenMV Cam in high-level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++.

This makes it easier to deal with the complex outputs of machine vision algorithms and work with high-level data structures. But, you still have total control over your OpenMV Cam and its I/O pins in Python. You can easily trigger taking pictures and videos of external events or execute machine vision algorithms to figure out how to control your I/O pins.

Applications

1. Home automation.
2. Robot guidance.
3. Industrial Applications.
4. Surveillance Applications.
5. Object detection and tracking.

Features:

• The STM32H743VI ARM Cortex M7 processor runs at 480 MHz with 1MB SRAM and 2MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces:
• A full-speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.
• A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to take pictures and easily pull machine vision assets off of the μSD card.
• An SPI bus that can run up to 80Mbs allows you to easily stream image data of the system to either the LCD Shield, the WiFi Shield, or another microcontroller
• An I2C Bus (up to 1Mb/s), CAN Bus (up to 1Mb/s), and an Asynchronous Serial Bus (TX/RX, up to 7.5Mb/s) for interfacing with other microcontrollers and sensors.
  • A 12-bit ADC and a 12-bit DAC.
  • Three I/O pins for servo control.
  • Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).
  • And, an RGB LED and two high-power 850nm IR LEDs.
• A removable camera module system allows the OpenMV Cam H7 to interface with different sensors:

Package Includes:

1 x OpenMV Cam H7 R2

Gigabit Multimedia Serial Link (GMSL) is a multigigabit, point-to-point connection targeting the automotive space. GMSL supports multistream over a single cable, up to 15m with a coax cable. GMSL is a high performance protocol combined with a secure FAKRA connector making it best suited for robotic and warehouse applications.

The D457 depth camera adds a GMSL serializer and FAKRA connector to the Intel RealSense camera product line. GMSL/FAKRA is a lower power, lower ESD/EMI noise, lower latency and longer cable length compared to USB and higher bandwidth compared to Ethernet.

The camera integrates an IMU to allow your application to refine its depth awareness in any situation where the camera moves. This allows improved environmental awareness for robotics and drones.

The Intel RealSense Depth Camera D457 is our first GMSL/FAKRA high bandwidth stereo camera. The D457 has an IP65 grade enclosure protecting it from dust ingress and projected water.

D457 has an on-board Maxim serializer chip. A Maxim de-serializer is needed at host side to decode the streams.

Features:

1. D457 has an on-board Maxim serializer chip
2. Easy to use
3. Light weigh, low power consumptions
4. GMSL supports multistream over a single cable
5. Point-to-point connection targeting the automotive space

Specifications:

1. Use Environment: Indoor/Outdoor
2. Image Sensor Technolog: Global Shutter
3. Ideal Range: .6 m to 6 m
4. Depth Technology Stereoscopic
5. Minimum Depth Distance (Min-Z) at Max Resolution: ~52 cm
6. Depth Accuracy: <2% at 4 m
7. Depth Field of View (FOV): 87° × 58°
8. Depth Stream Output Resolution: Up to 1280 × 720
9. Depth Stream Output Frame Rate: Up to 90 fps
10. RGB Frame Resolution: 1280 × 800
11. RGB Frame Rate: 30 fps
12. RGB Sensor Technology: Global Shutter
13. RGB Sensor FOV: 90° × 65°
14. RGB Sensor Resolution: 1 MP
15. Camera Module: Intel RealSense Module D450
16. Vision Processor Board: Intel RealSense Vision Processor D4
17. Form factor: Camera Peripheral
18. Camera Dimension (Length × Height × Depth):  124 mm × 29 mm × 36 mm
19. Connectors: GMSL/FAKRA
20. Mounting Mechanism:
    • One 1/4‑20 UNC thread mounting point
    • Two M4 thread mounting points
    • Tripod

Packages Includes:

1 x Intel RealSense Depth Camera D457

Grove Vision AI Module Sensor is a thumb-sized AI camera with pre-installed ML algorithms for face recognition and people detection and supports customized models by users’ definition. It is easy to use with full documentation support, embeds a compact OV2640 camera sensor, and is compatible with the ecology of Xiao series and Arduino, all of which make it perfect for getting started with an AI-powered camera. Meet the new member of Grove Family: Grove Vision AI Module. The module features a compact AI-powered camera sensor embedded with Edge Machine Learning algorithms and can be easily deployed with simple clicks. It is a small and great assistant for various object detection projects and can be customized based on different needs. Just imagine endowing devices with vision through a tiny sensor.

Note: for more technical details go through the datasheet in the attachment section 

Application

1. People Detection
2. Customized Object Detection
3. Smart Doorkeeper
4. Fall Detection & Alarm
5. Face Recognition

Features:

1. Customizable Model
2. Compact AI Camera Sensor
3. Simple development & deployment
4. Plentiful documentation resource

Package Includes:

1 x Seeed Studio Grove Vision AI Module with Himax HX6537-A processor, thumb-size AI-powered OV2640 camera sensor, support Yolo V5 and Edge Impulse