This is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN’s Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there’s no breakage on the model even after a few drills.

Hard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure good quality and stability, eSUN is fully formulated with high quality imported raw materials.

Features:

1. High impact strength
2. Higher shock resistance than normal resin
3. Rigid resin
4. excellent mechanical properties such as hardness, tensile and bending
5. High surface hardness and wear resistance

Package Includes:

1 x eSUN Hard Tough resin for LCD 3D Printers 1 kg-White

High elongation at break, good elasticity, tear resistance, tensile, bending and compression, quick rebound, and certain wear resistance.
Compared with resin-Flex, the viscosity is greatly reduced to ensure release and molding. The release rate is relatively high and easy to print, lower hardness, and the molded parts are softer and more elastic; meanwhile, the bending performance is improved to make the thick parts can withstand more times and large Angle bending. It can be used on production models that require softness.

Features:

This Bio-based 3D printing resin uses PLA monomers as raw material and has unique features that make it a perfect general-purpose resin. Specifically designed for LCD/LED light source to achieve better printing quality.PLA Resin, Compatible to most LCD printers using 405 nm wavelength light. 75 shore D hardness and having Faster Printing Speed

Precautions:

Storage:
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.

Features:

1. Low odor
2. Safe & Environmentally friendly
3. Biodegradable
4. Low viscosity
5. Improved flow
6. Easy to clean
7. Stronger than most other standard resins
8. Scratch-resistant
9. High precision
10. Low warp
11. Moisture-resistant

Package Includes:

1 x eSUN 3D Printer bio Resin for LCD 3D Printers,1kg eResin-PLA- Black

eSUN Flexible Resin is a kind of urethane acrylate resin, it has good characteristics of high flexibility, high elasticity, high toughness and wear resistance. Suitable for printing parts that require elasticity.eSUN Flexible Resin contains polyurethane acrylate monomers as to reduce volume shrinkage during the photocuring process, which ensures the high precision of the print model with smooth finish.eSUN Rapid Resin was designed to reduce printing time with its excellent fluidity. Meanwhile UV resin has good combination of flexibility and toughness, strong adhesion of the model and easy to detach after forming.Resin Special is designed for LED light source to achieve better printing quality. eSUN Flexible Resin is compatible for most LCD 3D printers for fast prototyping with phone cases, medical models, toys and shoe models.

High flex, doesn’t break after multiple fold. Tougher with better tear resistance.

Precautions:

Storage:
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.

Features:

1. Low odor
2. Safe & Environmentally friendly
3. Biodegradable
4. Low viscosity
5. Improved flow
6. High Precision
7. High hardness
8. Easy to clean
9. Stronger than most other standard resins
10. Scratch-resistant
11. High precision
12. Low warp
13. Moisture-resistant

Package Includes:

1 x eSUN 3D Printer FLEX Resin 0.5kg-Yellow

This Bio-based 3D printing resin uses PLA monomers as raw material and has unique features that make it a perfect general-purpose resin. Specifically designed for LCD/LED light source to achieve better printing quality.PLA Resin, Compatible to most LCD printers using 405 nm wavelength light. 75 shore D hardness and having Faster Printing Speed

Precautions:

Storage:
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.

Features:

1. Low odor
2. Safe & Environmentally friendly
3. Biodegradable
4. Low viscosity
5. Improved flow
6. Easy to clean
7. Stronger than most other standard resins
8. Scratch-resistant
9. High precision
10. Low warp
11. Moisture-resistant

Package Includes:

1 x eSUN 3D Printer bio Resin for LCD 3D Printers,1kg eResin-PLA- White

Can be washed with water, saving steps for alcohol cleaning, greatly shortening the post-processing time, improving printing efficiency and being cost-effective.
The moulding precision is high, with high resolution, the surface of the printed product is smooth, and the printing details are clearly visible. The mechanical properties such as strength, toughness and rigidity are balanced. Low viscosity, high release rate, easy to print.

What is Water Washable Resin?

• Water Washable Resin is upgraded on the basis of general resin, lower odour than most the general resin.
• You can clean the printed model with water directly, which effectively protect your body from contacting an alcohol and another industrial solvent.

Parameter Information:

• Volume: 0.5KG
• 7 Available Colors: Grey, Transparent, White, Black, Yellow, Beige
• Material: Resin Monomer & Photo Initiator

Applications:

eSUN Water Washable Rapid Resin is suitable for fast prototyping with art and craft, home decoration, architecture, jewellery, dentistry, animation, and so on.

Precautions:

1. Storage
1) Keep away from light and seal at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

2. Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put it in your mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to be clean with high-concentration alcohol (>95%) for about 30 seconds.

Features:

1. Short curing time
2. No deformation during modling
3. Smooth surface
4. High precision.
5. Safe and eco-friendly metal packing
6. Water wash

Package Includes:

1 x eSun 3D Printer Water Washable Resin for LCD 3D Printers 0.5Kg-Yellow