LM2596R-ADJ – 37V 3A 150kHz Adjustable Output Step-Down Switching Regulator IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LM2596R-ADJ – 37V 3A 150kHz Adjustable Output Step-Down Switching Regulator IC SMD-5 Package

LNK304PN – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LNK304PN – POWER INTEGRATI

TNY264PN – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TNY264PN – POWER INTEGRATI

MP1584 Switching Step Down Regulator IC – SOIC8E Package

The MP1584 is a high-frequency step-down switching regulator with an integrated internal high-side high-voltage power MOSFET. It provides 3A output with current mode control for fast loop response and easy compensation. The wide 4.5V to 28V input range accommodates a variety of step-down applications, including those in an automotive input environment. A 100µA operational quiescent current allows use in battery-powered applications.

High power conversion efficiency over a wide load range is achieved by scaling down the switching frequency at light load conditions to reduce the switching and gate-driving losses. The frequency foldback helps prevent inductor current runaway during startup and thermal shutdown provides reliable fault-tolerant operation. By switching at 1.5MHz, the MP1584 is able to prevent EMI (Electromagnetic Interference) noise problems, such as those found in AM radio and ADSL applications. The MP1584 is available in a thermally enhanced SOIC8E package.

Applications:

• High Voltage Power Conversion
• Automotive Systems
• Industrial Power Systems
• Distributed Power Systems
• Battery Powered Systems

Features:

1. Wide 4.5V to 28V Operating Input Range
2. Programmable Switching Frequency from 100kHz to 1.5MHz
3. High-Efficiency Pulse Skipping Mode for Light Load
4. Ceramic Capacitor Stable
5. Internal Soft-Start
6. Internally Set Current Limit without a Current Sensing Resistor

Specifications:

1. Manufacturer: Monolithic Power Systems
2. Series: MP1584
3. Product Type: Switching Voltage Regulators
4. Input Voltage, Max: 28 VDC
5. Output Voltage: 800 mV To 25 V
6. Output Current: 3 A
7. Number of Outputs: 1 Output
8. Switching Frequency: 1.5 MHz
9. Moisture Sensitive: Yes
10. Mounting Style: SMD/SMT
11. Package/Case: SOIC-8E

Package Includes:

1 x MP1584 Switching Step Down Regulator IC

TNY274PG – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TNY274PG – POWER INTEGRATI

The DRV835x family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field- oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller. The DRV835x uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.

Applications:

1. 3-phase brushless-DC (BLDC) motor modules
2. Fans, blowers, and pumps
3. E-Bikes, E-scooters, and E-mobility
4. Power and garden tools, lawn mowers
5. Drones, robotics, and RC toys
6. Factory automation and textile machines

Specifications:

1. Operating Voltage: 6V ~ 95V
2. Current: 25mA
3. Technology: Power MOSFET
4. Interface: SPI
5. Mounting type: SMD
6. Output conflagration: Half Bridge
7. Operating temperature: -40°C ~ 125°C (TA)

Note: For more info refer to datasheet

Packages Includes:

1 x DRV8353RSRGZR IC