RFM95W Wireless Receiving Module,915mhz

SKU: 1031106
Out of stock

633.00

Add to Wishlist
Add to Wishlist
  1.  Input Voltage:3 V
  2. Bit Rate:300 kbps
  3. Sensitivity :Down to -144 dBm
  4. Dimension:16x16x2 mm
  5. Weight:3 gm
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

The  RFM95W transceivers feature the  LoRaTM long-range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. Using Hope RF’s patented LoRaTM modulation technique RFM95W can achieve a sensitivity of over -148dBm using a low-cost crystal and bill of materials.

The high sensitivity combined with the integrated +20 dBm power amplifier yields an industry-leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity, and energy consumption.


Features:

  1.  LoRaTM Modem.
  2.  168 dB maximum link budget.
  3.  +20 dBm – 100 mW constant RF output vs. V supply.
  4.  +14 dBm high-efficiency PA.
  5.  Programmable bit rate up to 300 kbps.
  6.  High sensitivity: down to -148 dBm.
  7.  Bullet-proof front end: IIP3 = -12.5 dBm.
  8.  Excellent blocking immunity.
  9.  Low RX current of 10.3 mA, 200 nA register retention.
  10.  Fully integrated synthesizer with a resolution of 61 Hz.
  11.  FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  12.  Built-in bit synchronizer for clock recovery

Package Includes:

1 x RFM95W Wireless Receiving Module,915mhz

Additional information

Input Voltage (V)

1.8~3.7

Bit Rate(kbps)

300

Sensitivity (dBm)

Down to -144 dBm

Operating Temperature Range (°C)

-20 to 70

Length (mm)

16

Width (mm)

16

Height (mm)

2

Weight (gm)

3

Quick Comparison

SettingsRFM95W Wireless Receiving Module,915mhz removeKl600-3 433 Mhz 6-Button RF Remote Control(Without Battery) removeNRF24L01 Wireless Data Transmission module (Green) 10pin removeRFM69HCW Wireless Receiving Module 868mhz removeHackRF One removeReceiver chipset CMT2210AW-ESR. remove
NameRFM95W Wireless Receiving Module,915mhz removeKl600-3 433 Mhz 6-Button RF Remote Control(Without Battery) removeNRF24L01 Wireless Data Transmission module (Green) 10pin removeRFM69HCW Wireless Receiving Module 868mhz removeHackRF One removeReceiver chipset CMT2210AW-ESR. remove
Image
SKU10311061048043975816115077410519571195293
Rating
Price 633.00205.00151.00 367.0020,555.0037.00
Stock
Out of stock
Out of stock
In Stock
In Stock
In Stock
In Stock
AvailabilityOut of stockOut of stockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Description
  1.  Input Voltage:3 V
  2. Bit Rate:300 kbps
  3. Sensitivity :Down to -144 dBm
  4. Dimension:16x16x2 mm
  5. Weight:3 gm
  1. Model No.: KL600-3
  2. Voltage: DC 12V
  3. Material: Plastic
  4. Modulation Way: ASK/OOK
  5. Encoding Type: Fixed, Learning, Rolling Code
  6. Encoding Chip: Sc2260,EV1527,Hcs301
  7. Operating Current: 14mA
  1. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
  2. Built-in hardware CRC error detection, Multipoint communication address control.
  3. Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode
  4. Built-in 2.4Ghz antenna
  5. Built-in voltage regulator
  6. Standard DIP Pitch Interface for embedded applications
  7. size: 34mm X 17mm X 1mm
  1. Model: RFM69HCW
  2. Frequency:868MHz
  3. Power Output Capability:+20 dBm 100 mW
  4. Sensitivity:-120 dBm at 1.2 kbps
  5. Selectivity:16-tap FIR Channel Filter
  6. FSK Bit rates:1.2kbps to 300kbps
  7. Voltage range:1.8V to 3.6V
  8. Module Size:16X16mm
  1. 1 MHz to 6 GHz operating frequency
  2. half-duplex transceiver
  3. up to 20 million samples per second
  4. 8-bit quadrature samples (8-bit I and 8-bit Q)
  5. compatible with GNU Radio, SDR#, and more
  6. software-configurable RX and TX gain and baseband filter
  7. software-controlled antenna port power (50 mA at 3.3 V)
  1. Configurable receiver bandwidth: 50 to 500KHz.
  2. Supply voltage: 1.8V to 3.6V.
  3. Low power Consumptions: 3.8mA.
  4. 16-pin QFN 3×3 and SOP 16 package options.
Content

The  RFM95W transceivers feature the  LoRaTM long-range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. Using Hope RF’s patented LoRaTM modulation technique RFM95W can achieve a sensitivity of over -148dBm using a low-cost crystal and bill of materials.

The high sensitivity combined with the integrated +20 dBm power amplifier yields an industry-leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity, and energy consumption.


Features:

  1.  LoRaTM Modem.
  2.  168 dB maximum link budget.
  3.  +20 dBm – 100 mW constant RF output vs. V supply.
  4.  +14 dBm high-efficiency PA.
  5.  Programmable bit rate up to 300 kbps.
  6.  High sensitivity: down to -148 dBm.
  7.  Bullet-proof front end: IIP3 = -12.5 dBm.
  8.  Excellent blocking immunity.
  9.  Low RX current of 10.3 mA, 200 nA register retention.
  10.  Fully integrated synthesizer with a resolution of 61 Hz.
  11.  FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  12.  Built-in bit synchronizer for clock recovery

Package Includes:

1 x RFM95W Wireless Receiving Module,915mhz

 This is a Kl600-3 433 Mhz 6-Button RF Remote Control(Without Battery). The remote Designed for universal medium-range remote control applications. Come with various different button quantity options. The whole enclosure is made of ABS with a scrub surface and feels good. The transmitter is highly configurable with a frequency of 433 MHz. It supports the individuation logo and button symbol.

Applications:

Widely used in automobiles, vehicle door locks, anti-theft alarms, security systems, home security systems, home electric control, wireless toys, short-to-medium distance wireless remote control products, industrial automation, etc.

Note: This remote does not come with a battery(23A,12V battery). You have to buy it separately.


Feature and Specifications:

  1. Operating Voltage: DC12V
  2. Battery:23A 12V
  3. Model No: KL600-3
  4. Voltage:12V
  5. Material: Plastic
  6. Frequency:433MHz
  7. Current:30 mA
  8. Adjustable Frequency:250-460MHz
  9. Encoding Type: Fixed, Learning Code
  10. Modulation Way: Ask/Ook

Package Includes:

1 x Kl600-3 433 Mhz 6-Button RF Remote Control(Without Battery)

NRF24L01 Wireless Data Transmission module (Green) 10pin

 


Specifications and Features:

 

  1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
  2. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs
  3. Built-in hardware CRC error detection, Multipoint communication address control.
  4. Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode
  5. Built-in 2.4Ghz antenna
  6. Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
  7. Built-in voltage regulator
  8. Standard DIP Pitch Interface for embedded applications
  9. size: 34mm X 17mm X 1mm

Package Includes:

1 x NRF24L01 Wireless Data Transmission module (Green) 10pin

RFM69 series wireless communication module based on whether the band MCU, whether to raise the power amplifier, data interface, and packaging methods are divided into a variety of models to choose from, various types of modules within the same family can communicate with each other, all the models of advanced design, the excellent technical indicators meet FCC / CE standard parameters required to meet the clients authentication needs. RFM69 type is without MCU, transmits power below the 13dBm wireless communication module.

The RFM69HCW is a transceiver module capable of operation over a wide frequency range, including the 315,433,868 and 915MHz license-free ISM (Industry Scientific and Medical) frequency bands. All major RF communication parameters are programmable and most of them can be dynamically set. The RFM69HCW offers the unique advantage of programmable narrow-band and wide- band communication modes. The RFM69HCW is
optimized for low power consumption while offering high RF output power and channelized operation. Compliance ETSI and FCC regulations.
In order to better use RFM69HCW modules, this specification also involves a large number of the parameters and functions of its core chip RF69H’s,including those IC pins which are not leaded out. All of these can help customers gain a better understanding of the performance
of RFM69HCW modules, and enhance the application skills.

Applications:
  1. Medical devices and remote control
  2. Logistics tracking, warehouse inspection, electronic tags, etc.
  3. Consumer Electronics Wireless Application
  4. Low-power telemetry
  5. Wireless sensor network applications.

Features:

  1. FSK, GFSK, MSK, GMSK and OOK modulations
  2. Built-in Bit Synchronizer performing Clock Recovery
  3. Incoming Sync Word Recognition
  4. 115 dB+ Dynamic Range RSSI
  5. Automatic RF Sense with ultra-fast AFC
  6. Packet engine with CRC-16, AES-128, 66-byte FIFO
    Built-in temperature sensor

Package Includes:

1 x RFM69HCW Wireless Receiving Module 868mhz

This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable the test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.

If you are wondering what an SDR actually is, it’s OK we can help. A Software Defined Radio is essentially a radio communication device that implements the use of software instead of the typically implemented hardware (these would include mixers, amps, and modulators for example). SDR is the application of Digital Signal Processing to radio waveforms. It is similar to the software-based digital audio techniques that became popular a couple of decades ago. Just as a sound card in a computer digitizes audio waveforms, a software radio peripheral digitizes radio waveforms. It’s like a very fast sound card with the speaker and microphone replaced by an antenna. The HackRF One acts in just this way, an all-in-one SDR in a small enclosure a little bigger than a cell phone.

Every HackRF One is protected by an injection-molded plastic enclosure and ships with a micro USB cable.


Features:

  1. SMA female antenna connector
  2. SMA female clock input and output for synchronization
  3. Convenient buttons for programming
  4. Internal pin headers for expansion
  5. Hi-Speed USB 2.0
  6. USB-powered
  7. Open-source hardware

Package Includes:

1 x  HackRF One

1 x  Micro USB Cable

3 x Antennas (as shown in image)

 

[vc_row][vc_column][vc_column_text]The CMT2210/17AW devices  are ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 960 MHz wireless application. The CMT2210AW covers the frequency range from 300 to 960 MHz frequency range. They are part of the CMOSTEK Next Gen RF  family, which includes a complete line of transmitter, receivers and transceivers. An embedded EEPROM allows the frequency , symbols rate and other feature to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock product of 433.92/868.35 MHz are available for immediate demands without the need of EEPROM programming. when the CMT2210/17AW is always on, it consumes only 3.8 mA current while achieving -113 dBm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the build-in sleep timer. The CMT2210/17AW receiver together with the  CMT211x transmitter enables an ultra low cost RF link.

Applications:

  1. Low-Cost Consumer Electronic Applications.
  2. Home and Building Automations.
  3. Industries Monitoring and Controls.
  4. Infrared Receivers Replacements.
  5. Remote Automations Meter Reading.
  6. Remote Lighting Control System.
  7. Wireless alarm and security system.
  8. Remote keyless entry.

Features:

  1. Embedded EEPROM.
  2. Very easy to development with RFPDK.
  3. All features programmable.
  4. 3-wire SPI interface for EEPROM programming.
  5. Stand-alone no extra MCU control required.
  6. Configuration duty-cycle operation mode.
  7. 16-pin QFN 3×3 and SOP 16 package options.

Specifications:

  1. Frequency range: 300 to 960 MHz.
  2. Symbol rate: 0.1 to 40 ksps.
  3. Sensitivity: -113dBm at 1 ksps, 0.1% BER.
  4. Configurable receiver bandwidth: 50 to 500KHz.
  5. Supply voltage: 1.8V to 3.6V.
  6. Low power Consumptions: 3.8mA.

Packages Includes:

1 x Receiver chipset CMT2210AW-ESR.(SMD 16)[/vc_column_text][/vc_column][/vc_row]

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Input Voltage (V)

1.8~3.7

Bit Rate(kbps)

300

Sensitivity (dBm)

Down to -144 dBm

Operating Temperature Range (°C)

-20 to 70

Length (mm)

16

Width (mm)

16

Height (mm)

2

Weight (gm)

3

Model No.

Kl600-3

Material

Plastic

Voltage (V)

12

Operating Current

14mA

Modulation Way

ASK/OOK

Length (mm)

88

Width (mm)

35

Height (mm)

10

Weight (gm)

25

Model

RFM69HCW

Product Type

Wireless Receiving Module

Frequency

868mhz

Power Output Capability

+20 dBm 100 mW

Sensitivity (dBm)

120 dBm at 1.2 kbps

Selectivity

16-tap FIR Channel Filter

FSK Bit rates

1.2kbps to 300kbps

Voltage Range

1.8V to 3.6V

Length (mm)

16

Width (mm)

16

Height (mm)

21

Weight (gm)

13.5