The TTGO T-Journal ESP32 OLED Normal Camera Module Development Board With OV2640 SMA Wifi 3dbi Antenna provides you with a way to use to receive data from a remote location，and it is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. This Module can also be applied to DIY image transfer also data transfer, making GPS trackers, or other applications like Smart home, etc.

Features:

1. High sensitivity and low light operation standard SCCB interface.
2. supports image sizes: UXGA, SXGA, SVGA.
3. Communication distance is up to 300m.

Package includes:

1 x TTGO T-Journal ESP32 OLED Normal Camera Module Development Board With OV2640 SMA Wifi 3dbi Antenna

Timer Camera is a camera module based on the ESP32 with 8MB integrated with PSRAM. The 3 million (3MP) pixel camera (ov3660) ,DFOV 66.5 ° and can shoot a maximum of 2048×1536 resolution photos. There is a LED status indicator and reset button on the board. The timer Camera is designed to have ultra-low power consumption. Using the RTC (BM8563), timing, sleep, and wake-up functions can be utilized.

Useful  link:

Arduino IDE environment setup-TimerCAM/UnitCAM

Features:

1. Design based on ESP32
2. Wi-Fi image/video transmission
3. Timed sleep wake up
4. Status indicator
5. Ultra-low power design
6. Programming platform:ESP-IDF/Arduino/UIFlow

Specifications:

1. PSRAM: 8MB
2. Flash: 4M
3. Image Sensor: OV3660
4. Maximum resolution: 3M pixels
5. Output format: 8-/10-Bit RAW, RGB and YCbCr output, compression.
6. DFOV: 66.5°
7. Battery Interface Specifications: SH1.0-2P

Package Includes:

1 x M5STACK ESP32 PSRAM Timer Camera (OV3660)

A dual-bay Battery Charger for the RunCam Scope Cam 4K, allowing you to charge up to two batteries simultaneously. Whilst the RunCam Scope Cam is amazing and compact, its Battery Life is limited, and so will be the deciding factor in how much footage you can capture throughout a day. Provided you have enough Batteries on standby, you can record for as long as you like, making this an essential purchase for any serious Airsoft content creator.

This dual charger is compatible with the RunCam RC2-09 battery which is used by the RunCam action cameras such as the RunCam 2, RunCam 2 4K, RunCam Airsoft, RunCam Scope 4K, and RunCam Scope Lite. The charger requires a USB power supply, with input for both a micro USB cable or USB-C, a micro USB cable is provided.

Features

1. Battery Charger
2. For RunCam Scope Cam
3. Dual-Bay Charger
4. Charge Two Batteries at Once
5. Micro USB Cable Included
6. Essential for All-Day Use
7. Keep Your Camera Running
8. Essential Purchase for Content Creators
9. More Battery = More Footage

Specifications:

1. Model: RUNCAM DUAL CHARGER
2. Input: 5V⎓2A
3. Input Port: Micro-USB and Type-C
4. Output: 4.35V⎓750mA(X2)
5. Dimensions (L x W x H) mm:  70.2 x 55.2 x 24

Package Includes:

1 x RunCam Dual Charger

1 x Micro USB Cable

Raspberry Pi Camera Module, adjustable-focus.After the Bullseye version of the Raspberry Pi image, the underlying Raspberry Pi driver was switched from Raspicam to libcamera. libcamera is an open-source software stack (will be called driver later, which is easy to understand), which is convenient for third-party porting and development of their own camera drivers. As of 2021-12-20, there are still many bugs in libcamera, and the current libcamera does not support python, so the Raspberry Pi official still provides a method for installing and downloading Raspicam. For users who are difficult to switch to libcamera but need to use the latest system, please directly refer to the Raspicam instructions.

Features:

1. Raspberry Pi Camera
2. Supports connecting fill flash LED
3. supports all revisions of the Pi
4. Fisheye Lens, offers wider field of view
5. 5 megapixel OV5647 sensor
6. Adjustable focus distance

Package Include:

1 X RPi Camera (M)

1 X 15-pin FFC (opposite sides contact)

IMX219-160IR Camera, Applicable For Jetson Nano, 8 Megapixels, Infrared Night Vision, 160° FOV.IMX219 Camera, 8 megapixels and 160 FOV. Compatible with Jetson nano, support night vision. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of waveshare and the Stereo pie board.

Applications

1. Combined with the Jetson Nano AI computer
2. Face recognition
3. Road mark detection
4. License plate recognition

Features

1. Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX
2. Supports night vision when works with infrared LEDs
3. Supports connecting infrared LED and/or fill flash LED
4. 8 Megapixels

Package Include:

1 X IMX219-160IR Camera

1 X Infrared LED Board (B) 2PCS

1 X 15-pin FFC (opposite sides contact)

IMX219-120 Camera, Applicable For Jetson Nano, 8 Megapixels, 120° FOV. IMX219 Camera, 8 megapixels and 120 FOV. Compatible with Jetson nano. You can also use it with CM3/CM3+ expansion boards like the official Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare, and the Stereo Pi board.

After the Bullseye version of the Raspberry Pi image, the underlying Raspberry Pi driver was switched from Raspicam to libcamera. libcamera is an open-source software stack (will be called driver later, which is easy to understand), which is convenient for third-party porting and development of their own camera drivers.

As of 2021-12-20, there are still many bugs in libcamera, and the current libcamera does not support python, so the Raspberry Pi official still provides a method for installing and downloading Raspicam. For users who are difficult to switch to libcamera but need to use the latest system, please directly refer to the Raspicam instructions.

Features:

1. Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX
2. 8 Megapixels
3. Sensor: IMX219
4.  120 degree Field of view

Package Include:

1 X IMX219-120 Camera

1 X 15-pin FFC (opposite sides contact)