Features: 

1. Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie, driver free
2. Supports all versions of Raspberry Pi
3. Jetson Nano
4. Supports Ubuntu
5. PC
6. Supports Windows 11 / 10 / 8.1 / 8 / 7
7. Connection Examples
8. Working With Raspberry Pi 4

Package Includes:

1 x 6inch HDMI AMOLED
1 x Speaker
1 x HDMI flat cable ~1m
1 x USB-A to USB-C cable ~1m
1 x HDMI Adapter (C)
1 x HDMI Adapter (B)
1 x Screws pack

This is a Waveshare 1.3 Inch OLED Display (A) module. It is a very high-contrast display with no backlight.  It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32.

Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Pin Definition:

1. VCC Power positive (3.3~5V power input)
2. GND Ground
3. NC NC
4. DIN Data input
5. CLK Clock signal input
6. CS Chip selection, low active
7. D/C Command signal, low level for command, high level for data
8. RES Reset signal, low active

Dimension

Features:

1. Better quality
2. The IIC address can be changed, it is convenient to use with different machines.
3. Four square holes are easy to install

Package Includes:

1 x 1.3 Inch OLED Display (A)

Grove – OLED Display 0.96″ module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface.Comparing to LCD, OLED screens are more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen so that it can display more contents than the OLED 96×96.

Getting started it SeeedStudio Grove OLED Display 0.96”

Features: 

1. Grove compatible interface
2. Communicate Mode:I2C
3. Low power consumption
4. Display Color: White
5. Wide range of operating temperature:-20℃~70℃
6. I2C Address 0x3C

Specification:

1. Power Voltage (VCC): 3.3~5.5 V
2. Driver IC: SSD1308Z
3. Display Color: White
4. Dot Matrix: 128×64
5. Panel Size: 26.7(W)×19.26(H)mm
6. Active Area: 21.74(W)×11.175 (H)mm
7. Dot Pitch: 0.17(W)×0.175 (H)mm
8. Dot Size: 0.15(W)×0.15 (H)mm
9. Wide range of operating temperature:20~70℃

Package Includes :

1 x SeeedStudio Grove OLED Display 0.96”
1 x JST cable

It is suitable for flight control of Pixhawk, etc. and is used to display the status information of aircraft. This module is connected to Pixhawk’s I2C interface

Note: Actual product may vary from image in terms of Design, Color, Size.

Features:

1. Light weight
2. Display compatible with Pixhawk 2.4.8 PIX PX4 Flight Control
3. Easy to use
4. Plug and play device

Specifications:

1. Product: OSD OLED Display
2. Operating voltage: 3.3V-5V DC
3. Compatible: Pixhawk 2.4.8 PIX PX4 Flight Control
4. Working temperature: -30°C ~ 70°C
5. Display dimension: 2.5 x 1.4 x 0.1mm
6. Over all dimension: 3 x 2.7 x 0.3mm
7. Weight: 3g

Packages Includes:

1 x OSD OLED Display for Pixhawk 2.4.8 PIX PX4 Flight Control

This is a general OLED display Module, 0.91inch diagonal, 128×32 pixels, with an embedded controller, communicating via an I2C interface. OLEDs are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED.

The most attractive thing about using OLED displays is that they do not need a backlight like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy-saving displays ever!!!

This Waveshare General 0.91inch OLED display Module offers 128×32 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. 

This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C(also called IIC) serial interface.

The 0.91inch OLED display Module produces white text on black background with very good contrast when supplied with a DC 2.8V supply. The OLED Display Modules also offers a very wide viewing angle.

Pin Description:

Features :

1. 0.91inch small form factor
2. 128×32 high resolution
3. I2C interface requires only two signal pins
4. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
5. No need for the backlight
6. The display is self-illuminating
7. Power requirement is low
8. They are offering the large viewing angle
9. Better performance characteristics than traditional LCD and LED displays.

Package Includes :

1 x 0.91inch OLED Module

1 x PH2.0 4Pin

This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56.

There is a small section near the pins that are not transparent but still can display content), full-view, and blue display.

For convenience, the small converter comes with two available connections: GDI and SPI. And there are all kinds of display code samples for meeting the basic requirements of most users.

Features:

Applications:

Specifications: