- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
Arduino UNO 3.5 inch TFT screen
In Stock
Add to Wishlist
Add to Wishlist
5 Inch HDMI Touch LCD for Raspberry Pi
In Stock
Add to Wishlist
Add to Wishlist
- Main chip: ESP32-WROVER-B, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Main chip:ESP32 WROVER-B
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Very low power logging is supported
- Built-in MCP73831 single cell LiPo charger
- Current consumption
- ~20mA (Run)
- ~80µA (Sleep)
- ~18µA (Deep Sleep – regulator shut down)
- LEDs
- Power
- LiPo charge indicator
- Serial Tx and Rx
- Status
Add to Wishlist
Add to Wishlist
- Power amplifier chip NS4168
- I2S serial digital audio input interface
- Support a wide range of sampling rates: 8kHz~96kHz
- Automatic sampling rate detection, adaptive function
Add to Wishlist
Add to Wishlist
- Support type:16G FAT/FAT32 MicroSD
- Compatible with ATOM Matrix/ ATOM Lite
- Up to 16G TF card
- FAT/FAT32 format
Add to Wishlist
Add to Wishlist
- ESP32 Standard wireless functions WiFi, Bluetooth
- Internal 4M Flash
- Low Power Display
- 180-degree viewing angle
Add to Wishlist
Add to Wishlist
- Input Voltage:3-5.5 V
- Flash Memory:8 MB
- Powered by RP2040
- User controllable RGB LED
- USB-C connector for power, programming, and data transfer
Add to Wishlist
Add to Wishlist
- Input Voltage (V):3.3V@600mA
- Processor: Kinetis KL26 Arm® Cortex®-M0+ MCU
- Maximum Clock Frequency (MHz):48
- Flash Memory:128kB
- SRAM:16kB
- Dimension:95x38x10 mm
- Weight:21 gm
Add to Wishlist
Add to Wishlist
- Working voltage: 3.3V
- Input voltage: 3.3V~5V
- Support electric current of low power consumption: 10 μA
- Support maximum discharge current: 600mA
- Quick Response(the top frequency is 400KHz)
- Cost-effective
- Small size, convenient to install
Add to Wishlist
Add to Wishlist
- WiFi+Bluetooth 4.0 Dual-mode Module
- GDI Display Port, easy to connect
- Operating Voltage: 3.3V
- Input Voltage: 3.3V~5.5V
- Support Low-Power: 10uA
- ESP32 Dual-core low power main controller, 10uA power consumption
Add to Wishlist
Add to Wishlist
- Operating Current: 3.3V
- Operating Frequency: 433MHz
- Modulation Type: LoRaTM
- Output Power: ≤20dBm
- Receiving Sensitivity: -139dBm
Add to Wishlist
Add to Wishlist
- 24 I/O channels with input protection circuitry
- Adjustable target voltage: 1.2 V to 3.3 V
- Supported target interfaces (as of firmware v1.1): JTAG/IEEE 1149.1, UART/asynchronous serial
- USB interface for direct connection to the host computer
Add to Wishlist
Add to Wishlist
- nRF52840 ARM Cortex-M4F processor at 64 MHz
- 1 MB flash memory and 256 KB of SRAM
- Battery connector and charger for 3.7 V lithium polymer batteries
- SWD connector
Add to Wishlist
Add to Wishlist
- Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
- The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
- Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
- Onboard Wifi module RST reset button
- ESP-12F support use Eclipse/Arduino IDE etc.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000