-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹7,326.45 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹6,960.13 (Including tax) |
11 - 20 | 8% | ₹6,740.32 (Including tax) |
21 - 40 | 10% | ₹6,593.81 (Including tax) |
41 - 100 | 12% | ₹6,447.27 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
The SparkFun Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis-based boards. This Kit includes the SparkFun Artemis DK board as well as the accessories (Himax camera & USB-C cable) needed to get started right away. Recommended software used to program the Artemis DK are the Arduino IDE, Arm® Mbed™ OS (Studio and CLI), and AmbiqSDK. An updated USB interface (MKL26Z128VFM4 Arm® Cortex®-M0+ MCU, from NXP) allows the Artemis Dev Kit to act as:
The Artemis Module provides a Cortex®-M4F with BLE 5.0 running at 48MHz with an available 96MHz turbo mode and power as low as 6uA per MHz (less than 5mW). The SparkFun Artemis Module is fully FCC/IC/CE certified with 1M flash and 384k RAM you’ll have plenty of room for your code. You can program and use the Artemis module just like you would an Uno or any other Arduino. Additional functionality stems from the ability of the Artemis Devkit to run RTOS such as the Arm Mbed OS, or the AmbiqSDK.
1 x SparkFun Artemis Development Kit with Camera
Input Voltage (V) |
3.3V@600mA |
---|---|
Processor |
Kinetis KL26 Arm® Cortex®-M0+ MCU |
Maximum Clock Frequency (MHz) |
48 |
Flash Memory |
128kB |
SRAM |
16kB |
Length (mm) |
95 |
Width (mm) |
38 |
Height (mm) |
10 |
Weight (gm) |
20 |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
Out of stock
Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
---|---|
Memory |
4GB LPDDR4-3200 SDRAM |
Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
Interface |
2 channels USB3.0 1 channel way USB2.0 |
Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
Power Supply |
USB Type C interface ,5V/3A DC input |
Dimensions (L x W x H) mm |
100 x 100 x 19 |
Weight |
260g |
Software Environment |
Raspbian Desktop version pre-installed |
Out of stock
Model |
ED-CM4NANO10-0408-C |
---|---|
Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
Operating temperature |
-25~60°C |
Software Environment |
Raspberry Pi Raspbian OS installed |
Dimension (L x W x H) mm |
103 x 62 x 21.5 |
Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
Out of stock
Out of stock
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.